Methane is an important fuel for gas turbine and gas engine combustion, and the most common fuel in fundamental combustion studies. As Computational Fluid Dynamics (CFD) modeling of combustion becomes increasingly important, so do chemical kinetic mechanisms for methane combustion. Kinetic mechanisms of different complexity exist, and the aim of this study is to review commonly used detailed, reduced, and global mechanisms of importance for CFD of methane combustion. In this review, procedures of relevance to model development are outlined. Simulations of zero and one-dimensional configurations have been performed over a wide range of conditions, including addition of H2, CO2 and H2O, and the results are used in a final recommendation about the use of the different mechanisms. The aim of this review is to put focus on the importance of an informed choice of kinetic mechanism to obtain accurate results at a reasonable computational cost. It is shown that for flame simulations, a reduced mechanism with only 42 irreversible reactions gives excellent agreement with experimental data, using only 5% of the computational time as compared to the widely used GRI-Mech 3.0. The reduced mechanisms are highly suitable for flame simulations, while for ignition they tend to react too slow, giving longer than expected ignition delay time. For combustible mixtures with addition of hydrogen, carbon dioxide, or water, the detailed as well as reduced mechanisms generally show as good performance as for the corresponding simulations of pure methane/air mixtures.
With growing interest in sustainable civil supersonic and hypersonic aviation, there is a need to model the combustion of alternative, sustainable jet fuels. This work presents numerical simulations of several related phenomena, including laminar flames, ignition, and spray flames. Two conventional jet fuels, Jet A and JP-5, and two alternative jet fuels, C1 and C5, are targeted. The laminar burning velocities of these fuels are predicted using skeletal and detailed reaction mechanisms. The ignition delay times are predicted in the context of dual-mode ramjet engines. Large Eddy Simulations (LES) of spray combustion in an aeroengine are carried out to investigate how the different thermodynamic and chemical properties of alternative fuels lead to different emergent behavior. A novel set of thermodynamic correlations are developed for the spray model. The laminar burning velocity predictions are normalized by heat of combustion to reveal a more distinct fuel trend, with C1 burning slowest and C5 fastest. The ignition results highlight the contributions of the Negative Temperature Coefficient (NTC) effect, equivalence ratio, and hydrogen enrichment in determining ignition time scales in dual-mode ramjet engines. The spray results reveal that the volatile alternative jet fuels have short penetration depths and that the flame of the most chemically divergent fuel (C1) stabilizes relatively close to the spray.
Modeling of real-world fuels and fuel mixtures in combustion engines, using computational fluid dynamics (CFD), calls for the development of compact and computationally efficient chemical kinetic mechanisms. To improve the modeling capabilities of multicomponent fuels it is necessary to transition from the single-component descriptions of fuels and move toward more complex, accurate multicomponent ones, where different functionality groups are included. In this work a newly developed multicomponent reaction mechanism, capable of modeling the four different functionality groups n-, iso-, cyclo-alkanes and aromatics, is presented. The mechanism consists of seven fuel components with different molecular sizes and the mechanism offers the possibility to create surrogate fuels for real-world fossil and alternative fuels and fuel mixtures. The presented mechanism accurately models key combustion parameters at a wide range of conditions, considering the intrinsic characteristics of the four functional groups. The presented mechanism offers a unique combination of fuel flexibility, modeling performance and a low computational cost, and it opens up the possibilities to cost-efficient CFD simulations of multicomponent surrogate aviation fuels.
23 August 2022 in Combustion Science and Technology
Modeling of combustion engines using computational fluid dynamics (CFD), to investigate and improve performance of biodiesel combustion, calls for development of small and efficient chemical kinetics mechanisms that accurately represent ignition and flame propagation of renewable fuels. In this work, a semi-global approach is used to develop a mechanism suitable for three-dimensional CFD of fatty acid methyl esters (FAME) in compression ignition engines. The mechanism includes five FAME fuel constituents that are the main compounds in FAME fuels such as rapeseed, palm and soybean. Each FAME fuel constituent is modeled using individual fuel breakdown pathways, creating a highly versatile and compact reaction mechanism, capable of modeling any constituent combination and hence almost any FAME fuel blend. The presented mechanism accurately represents the important ignition properties of the fuels and fuel constituents, including the low-temperature chemistry. It is validated against available experimental data as well as a highly detailed reaction mechanism. The presented mechanism offers a unique combination of fuel flexibility, mechanism performance and a low computational cost.
Development and validation of a new reduced dimethyl ether-air (DME) reaction mechanism is presented. The mechanism was developed using a modular approach that has previously been applied to several alkane and alkene fuels, and the present work pioneers the use of the modular methodology, with its underlying H/C1/O base mechanism, on an oxygenated fuel. The development methodology uses a well-characterized H/C1/O base mechanism coupled to a reduced set of fuel and intermediate product submechanisms. The mechanism for DME presented in this work includes 30 species and 69 irreversible reactions. When used in combustion simulation the mechanism accurately reproduced key combustion characteristics and the small size enables use in computationally demanding Large Eddy Simulations (LES) and Direct Numerical Simulations (DNS). It has been developed to accurately predict, among other parameters, laminar burning velocity and ignition delay times, including the negative temperature regime. The evaluation of the mechanism and comparison to experimental data and several detailed and reduced mechanisms covers a wide range of conditions with respect to temperature, pressure and fuel-to-air ratio. There is good agreement with experimental data and the detailed reference mechanisms at all investigated conditions. The mechanism uses fewer reactions than any previously presented DME-air mechanism, without losing in predictability.