The problem of a DC-DC buck converter control to extract the maximum power from a photovoltaic (PV) system is considered in this paper. A controller is proposed based on the hybrid dynamical system approach dealing with both voltage and current control. This approach allows the system to track a desired voltage using the maximum power point tracking (MPPT) algorithm while keeping the output current at a moderate level. The stability of the closed loop of the full system is demonstrated by means of Lyapunov theory. The simulation utilizes realistic PV array parameters obtained using particle swarm optimization (PSO) identification algorithm. Experimental results are also presented showing the good performance of the proposed controller.
Solar panels have a nonlinear voltage-current characteristic, with a distinct maximum power point (MPP), which depends on the environmental factors, such as temperature and irradiation. In order to continuously harvest maximum power from the solar panels, they have to operate at their MPP despite the inevitable changes in the environment. This is why the controllers of all solar power electronic converters employ some method for maximum power point tracking (MPPT). This paper presents a comparative study between two most popular algorithms techniques which are incremental conductance (INC) and perturb and observe (P&O) in order to optimize the efficiency of the solar generator. The MPPT techniques will be compared, by using Matlab tool Simulink.