In this study, sequential KMnO4-promoted oxidative pyrolysis and H2O2 oxidation were employed to upgrade the adsorption capacities of durian shell biochar for methylene blue (MB) and tetracycline (TC) in an aqueous solution. It was found that the KMnO4/H2O2 co-modification was greatly influenced by pyrolysis temperature and the optimal temperature was 300 °C. Moreover, a low concentration of H2O2 enabled the improvement of the adsorption capabilities greatly with the catalysis of pre-impregnated manganese oxides, addressing the shortcoming of single H2O2 modification. The co-modified biochar exhibited high adsorption capabilities for MB and TC, remarkably surpassed KMnO4- and H2O2- modified biochars as well as pristine biochar. The increase of adsorption capabilities could be mainly contributed to the incorporation of MnOx and carboxyl by KMnO4-promoted oxidative decomposition and Mn-catalyzed H2O2 oxidation. This would provide a novel and efficient method for preparing highly adsorptive biochar using sequential KMnO4-promoted oxidative pyrolysis and H2O2 oxidation.
Xanthate is a class of non-toxic, rapid, and eco-friendly rubber vulcanization accelerator, but it is seldom used in the rubber industry because of its poor thermostability and ease of decomposition. To overcome these drawbacks, silica supported sodium isobutyl xanthate (silica-s-SIBX) was prepared by chemically bonding SIBX onto the silica surface. After loading, the initial degradation temperature (T0), maximum degradation temperature (Tp), and final decomposition temperature (Tf) of silica-s-SIBX were increased by 85.8, 118.9, and 146.9 °C, respectively. Meanwhile, silica-s-SIBX could not only improve the dispersion of fillers in the rubber but also enhance the interfacial interaction between silica and the rubber matrix. Therefore, it may offer new scientific and technological opportunities for preparation of green additives in the rubber industry.