Dong ZOU

Prof. Dr. Dong ZOU

Membrane Laboratory, Hanyang University, 222 Wangsimni-ro, Seongdong-gu, Seoul 133-791, Korea
+1

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2021 in Membranes
Verified
Journal Article
Open access
PDF file
WFWan Fan
Wan Fan
Dong ZOUDong ZOU
Dong ZOU
JXJingrui Xu
Jingrui Xu
XCXianfu Chen
Xianfu Chen
MQMinghui Qiu
Minghui Qiu
YFYiqun Fan
Yiqun Fan
Support is a necessary foundation for ceramic membranes to achieve high performance. Finding the optimum balance between high performance and low cost is still a significant challenge in the fabrication of ceramic supports. In this study, low-cost fly ash-based ceramic supports with enhanced performance were prepared by the addition of bauxite. The pore structure, mechanical strength, and shrinkage of fly ash/bauxite supports could be tuned by optimizing the bauxite content and sintering temperature. When the sintering temperature and bauxite content were controlled at 1300 °C and 40 wt%, respectively, the obtained membrane supports exhibited a high pure water permeance of approximately 5.36 m3·m−2·h−1·bar−1 and a high bending strength of approximately 69.6 MPa. At the same time, the optimized ceramic supports presented a typical mullite phase and excellent resistance to acid and alkali. This work provides a potential route for the preparation of ceramic membrane supports with characteristics of low cost and high performance.

19 May 2024 in Membranes
Verified
Journal Article
Open access
PDF file
YSYuqi Song
Yuqi Song
KMKai Miao
Kai Miao
JLJinxin Liu
Jinxin Liu
Yutang KangYutang Kang
Yutang Kang
Dong ZOUDong ZOU
Dong ZOU
Zhaoxiang ZhongZhaoxiang Zhong
Zhaoxiang Zhong
Membrane distillation (MD) is considered a promising technology for desalination. In the MD process, membrane pores are easily contaminated and wetted, which will degrade the permeate flux and salt rejection of the membrane. In this work, SiC ceramic membranes were used as the supports, and an Al2O3 micro-nano structure was constructed on its surface. The surface energy of Al2O3@SiC micro-nano composite membranes was reduced by organosilane grafting modification. The effective deposition of Al2O3 nanoflowers on the membrane surface increased membrane roughness and enhanced the anti-fouling and anti-wetting properties of the membranes. Simultaneously, the presence of nanoflowers also regulated the pore structures and thus decreased the membrane pore size. In addition, the effects of Al2(SO4)3 concentration and sintering temperature on the surface morphology and performance of the membranes were investigated in detail. It was demonstrated that the water contact angle of the resulting membrane was 152.4°, which was higher than that of the pristine membrane (138.8°). In the treatment of saline water containing 35 g/L of NaCl, the permeate flux was about 11.1 kg⋅m−2⋅h−1 and the salt rejection was above 99.9%. Note that the pristine ceramic membrane cannot be employed for MD due to its larger membrane pore size. This work provides a new method for preparing superhydrophobic ceramic membranes for MD.

21 July 2025 in Membranes
Verified
Journal Article
Open access
PDF file
SLShuhang Lu
Shuhang Lu
Dong ZOUDong ZOU
Dong ZOU
PVDF/TiO2 composite membranes show some potential to be used for water treatment as they combine the advantages of polymers and ceramics. However, conventional PVDF-based composite membranes are always fabricated by using conventional toxic solvents. Herein, PolarClean was used as a green solvent to fabricate PVDF/TiO2 composite membranes via the phase inversion method. In this process, Pluronic F127 was used as a dispersion agent to distribute TiO2 particles in the PVDF matrix and to serve as a pore former on the membrane surface. TiO2 particles were well distributed on the membrane surface and bulk. TiO2 particles in the PVDF matrix enhanced the mechanical strength and hydrophilic characteristics of the resulting composite membrane, facilitating water transport through the composite membranes and enhancing their water permeability. Membrane microstructures and mechanical strength of the composite membranes were finely tuned by varying the PVDF concentration, TiO2 concentration, and coagulation bath temperature. It was demonstrated that the resulting green PVDF/TiO2 composite membrane showed a high water permeance compared with those using conventional toxic solvents in terms of its small pore size. In addition, the particle rejection of green PVDF/TiO2 membrane showed a 99.9% rejection rate in all the filtration process, while those using NMP showed 91.1% after 30 min of filtration. The water flux was similar at 121 and 130 Lm−2h−1 for green and conventional solvents, respectively. This work provides important information for the future application of sustainable membranes.

15 November 2024 in Membranes
Verified
Journal Article
Open access
PDF file
WSWenbin Sun
Wenbin Sun
LXLongbo Xia
Longbo Xia
PLPing Luo
Ping Luo
Dong ZOUDong ZOU
Dong ZOU
Polyvinylidene fluoride (PVDF) membranes are extensively utilized in membrane distillation (MD) for water treatment. However, traditional methods easily form asymmetrical membranes with dense skin layers that are detrimental to membrane flux. Herein, an eco-friendly PVDF membrane was fabricated by utilizing a delayed phase separation process without using any pore-forming agents. In addition, methyl-5-(dimethylamino)-2-methyl-5-oxopentanoate (PolarClean) was used as a green solvent without posing risks to humans and the environment. It was demonstrated that the PVDF concentration is crucial in influencing the microstructures and performance of the resulting membranes. As the PVDF concentration increased, the morphology changed significantly, resulting in a reduction of pore size. When feeding the device with NaCl solution at a concentration of 35 g/L, the MD water vapor flux reached 18.49 kg·m−2·h−1, while maintaining a salt rejection of over 99.97% during the continuous operation for 24 h. This work presented a method for producing green PVDF membranes via delayed phase inversion with satisfactory water vapor flux and salt rejection, highlighting their prospect for effective applications in MD for water treatment.

1 September 2025 in Membranes
Verified
Journal Article
Open access
PDF file
SLShuhang Lu
Shuhang Lu
QXQianhui Xu
Qianhui Xu
MLMeiling Liu
Meiling Liu
Dong ZOUDong ZOU
Dong ZOU
GNGuangze Nie
Guangze Nie
The efficient purification of Pb(II)-containing wastewater is essential for safeguarding public health and maintaining the aquatic environment. In this study, novel hydrous ferric oxide (HFO) nanoparticle-embedded poly(vinylidene fluoride) (PVDF) composite adsorption membranes were developed through a simple blending method for efficient Pb(II) removal. This composite membrane (denoted as HFO-PVDF) combines the excellent selectivity of HFO nanoparticles for Pb(II) with the membrane’s advantage of easy scalability. The optimized HFO-PVDF(1.5) membrane achieved adsorption equilibrium within 20 h and exhibited excellent adsorption capacity. Moreover, adsorption capacity markedly enhanced with increasing temperature, confirming the endothermic nature of the process. The developed HFO-PVDF membranes demonstrate significant potential for real-world wastewater treatment applications, exhibiting exceptional selectivity for Pb(II) in complex ionic matrices and could be effectively regenerated via a relatively straightforward process. Furthermore, filtration and dynamic regeneration tests demonstrated that at an initial Pb(II) concentration of 5 mg/L, the membrane operated continuously for 10–13 h before regeneration, treating up to 200 L/m2 of wastewater before breakthrough, highlighting potential for cost-effective industrial wastewater treatment. This study not only demonstrates the high efficiency of the HFO-PVDF membrane for heavy metal ion removal but also provides a theoretical foundation and technical support for its practical application in water treatment.

8 September 2025 in Membranes
Verified
Journal Article
Open access
PDF file
JXJie Xu
Jie Xu
JLJinxin Liu
Jinxin Liu
MLMeiling Liu
Meiling Liu
GNGuangze Nie
Guangze Nie
Dong ZOUDong ZOU
Dong ZOU
Membrane distillation demonstrates ideal separation performance towards saline water; however, it fails to accomplish the classification and recovery of multiple components from complex saline solutions (i.e., heavy metal ion-laden saline water in process industries). Herein, an adsorption–membrane distillation (MD) coupling process was proposed, as an example of a Pb(II)/NaCl mixed solution, in which the prepared adsorption membrane was firstly employed to adsorb heavy metal ions in the mixed solution and then the brine was concentrated by the MD process to realize water source recovery and utilization. Firstly, an FeOOH@PVDF adsorptive membrane was fabricated to adsorb Pb(II) ions. It was demonstrated that chemical adsorption was identified as the dominant mechanism, and the composite membrane showed excellent selective adsorption for Pb(II). Following this, the omniphobic membrane was then employed to concentrate the Pb(II)-removed saline solution, maintaining a water flux of 16.12 kg·m−2·h−1 at a concentration factor of 7.7, demonstrating excellent MD concentration performance. Through this coupled process, the saline wastewater containing heavy metal ions was successfully separated into purified water and concentrated brine without heavy metal ions, providing a novel approach for the treatment and recycling of complex saline wastewater.