The treatment of wastewater containing heavy metals and the utilization of wool waste are very important for the sustainable development of textile mills. In this study, the wool keratin modified magnetite (Fe₃O₄) powders were fabricated by using wool waste via a co-precipitation technique for removal of Cu²⁺ ions from aqueous solutions. The morphology, chemical compositions, crystal structure, microstructure, magnetism properties, organic content, and specific surface area of as-fabricated powders were systematically characterized by various techniques including field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), thermogravimetric (TG) analysis, and Brunauer–Emmett–Teller (BET) surface area analyzer. The effects of experimental parameters such as the volume of wool keratin hydrolysate, the dosage of powder, the initial Cu²⁺ ion concentration, and the pH value of solution on the adsorption capacity of Cu²⁺ ions by the powders were examined. The experimental results indicated that the Cu²⁺ ion adsorption performance of the wool keratin modified Fe₃O₄ powders exhibited much better than that of the chitosan modified ones with a maximum Cu²⁺ adsorption capacity of 27.4 mg/g under favorable conditions (0.05 g powders; 50 mL of 40 mg/L CuSO₄; pH 5; temperature 293 K). The high adsorption capacity towards Cu²⁺ ions on the wool keratin modified Fe₃O₄ powders was primarily because of the strong surface complexation of –COOH and –NH₂ functional groups of wool keratins with Cu²⁺ ions. The Cu²⁺ ion adsorption process on the wool keratin modified Fe₃O₄ powders followed the Temkin adsorption isotherm model and the intraparticle diffusion and pseudo-second-order adsorption kinetic models. After Cu²⁺ ion removal, the wool keratin modified Fe₃O₄ powders were easily separated using a magnet from aqueous solution and efficiently regenerated using 0.5 M ethylene diamine tetraacetic acid (EDTA)-H₂SO₄ eluting. The wool keratin modified Fe₃O₄ powders possessed good regenerative performance after five cycles. This study provided a feasible way to utilize waste wool textiles for preparing magnetic biomass-based adsorbents for the removal of heavy metal ions from aqueous solutions.

In this study, the effects of disperse blue dye-sensitization on the photocatalytic properties of the Ag-N co-doped TiO₂ nanoparticles loaded on polyethylene terephthalate (PET) filaments are investigated under visible light irradiation. The microstructure and photocatalytic properties of the as-synthesized TiO₂ nanocomposites, as well as the as-prepared PET filaments, are systematically characterized. The photocatalytic performance of the PET filaments coated with the Ag-N co-doped TiO₂ nanoparticles sensitized with disperse blue dyes is evaluated via its capacity of photo-degrading methyl orange (MO) dyes under visible light irradiation. It is found that the holes are the predominant reactive radical species and the hydroxyl and superoxide radicals play a subordinate role in the photocatalytic reaction process. The reaction rate constant of the photocatalytic composite filaments is nearly 4.0 times higher than that of the PET filaments loaded solely with TiO₂ nanoparticles. The resultant photocatalytic composite filaments are evident to be capable of repeatedly photo-degrading MO dyes without losing its photocatalytic activity significantly.

The Mexican economy has been showing a continuous and arguably remarkable growth in the last decade, and it is expected that this strong economic growth is based on a balance between social equity, fiscal growth and environmental protection. This composite situation requires us to have a clear understanding of changes in consumer behaviour and their attitudes towards ethical consumerism in this region. With the use of a semi-structured questionnaire, this pilot study presented a detailed analysis of the consumer attitudes towards ethical consumerism in relation to their socioeconomic class levels in this region, the public consciousness and willingness to embrace ethical consumption of textile products in Mexico were thus determined. It is hoped that this knowledge provides the basis for the initiation of a framework of activities and measures to develop sustainable consumption habits and to educate consumers on the subject of ethical consumption.

There are difficulties in measuring the molecular weight (Mw) of bacterial cellulose (BC) using Gel Permeation Chromatography (GPC) analysis. Additionally, the Mark-Houwink-Sakurada equation cannot be used to predict the Mw of BC as no Mark-Houwink-Sakurada constant specific to BC is available. In this study, a systematic approach is developed to establish the relationship between the Mw of BC and the viscosity of its copper (II) ethylenediamine (CED) solutions. Impurities contained in the raw BC are examined and appropriate purification procedures are designed for their removal before the above two measurements are conducted. The Mw of BC is obtained by measuring the Degree of Polymerization of its corresponding cellulose acetate (CA), derived from degraded BC, using GPC analysis, and the viscosity of the CED solutions of the BC is measured using a BS/U Tube viscometer. In this paper, the Mark–Houwink–Sakurada constants (K=0.3752 mL/g and $$\alpha$$α =1.4532) specific for BC are determined to relate the Mw of BC with the intrinsic viscosity of its CED solutions. It is also found that the Mw of BC is proportional to the dynamic viscosity (i.e., $$\eta _{BC} =0.0183Mw^{1.3069}$$η BC = 0.0183 M w 1.3069 ) and the flow time (i.e., $$t_{BC} =1.3809$$t BC = 1.3809 Mw $$^{1.3062}$$1.3062 ) of its CED solutions. These BC-specific relationships can help determine the Mw of BC from the rheological properties of its CED solutions.