In this paper, some representative hyperelastic constitutive models of rubber materials were reviewed from the perspectives of molecular chain network statistical mechanics and continuum mechanics. Based on the advantages of existing models, an improved constitutive model was developed, and the stress–strain relationship was derived. Uniaxial tensile tests were performed on two types of filled tire compounds at different temperatures. The physical phenomena related to rubber deformation were analyzed, and the temperature dependence of the mechanical behavior of filled rubber in a larger deformation range (150% strain) was revealed from multiple angles. Based on the experimental data, the ability of several models to describe the stress–strain mechanical response of carbon black filled compound was studied, and the application limitations of some constitutive models were revealed. Combined with the experimental data, the ability of Yeoh model, Ogden model (n = 3), and improved eight-chain model to characterize the temperature dependence was studied, and the laws of temperature dependence of their parameters were revealed. By fitting the uniaxial tensile test data and comparing it with the Yeoh model, the improved eight-chain model was proved to have a better ability to predict the hyperelastic behavior of rubber materials under different deformation states. Finally, the improved eight-chain model was successfully applied to finite element analysis (FEA) and compared with the experimental data. It was found that the improved eight-chain model can accurately describe the stress–strain characteristics of filled rubber.
Based on the electronic universal testing machine with a temperature chamber, this paper investigated the temperature and filler effects on the hyper-elastic behavior of reinforced rubbers and revealed the regulation of the stress and strain of the natural rubber and filled rubber with temperature. The experimental results showed that the hyper-elastic behavior of the filled rubber was temperature-dependent in a wide range. Comparing the adaptability of different models to the stress–strain variation with temperature, the Yeoh model was proven to reasonably characterize the experimental data at different temperatures. Based on the Yeoh model, an explicit temperature-dependent constitutive model was developed to describe the stress–strain response of the filled rubber in a relatively large temperature range. The prediction data of this proposed constitutive model fit well with the test data of the mechanical experiments, indicating that the model is suitable to characterize the large deformation behavior of filled rubbers at different temperatures to a certain degree. The proposed model can be used to obtain the material parameters and has been successfully applied to finite element analysis (FEA), suggesting a high application value. Notably, the model has a simple form and can be conveniently applied in related performance tests of actual production or finite element analysis.
Rubber-based materials are widely used in a variety of industrial applications. In these applications, rubber components withstand various loading conditions over a range of temperatures. It is of great significance to study the mechanical behavior of vulcanized rubber at different temperatures, especially in a range of high temperatures. The temperature dependence of the constitutive behavior of filled rubber is important for the performance of the rubber. However, only a few constitutive models have been reported that investigate the stress–temperature relationship. In this paper, based on an analysis of experimental data, the effects of temperature on the hyperelastic behaviors of both natural rubber and filled rubber, with different mass fractions of carbon black, were studied. The regulation of stress and strain of natural rubber and filled rubber with temperature was revealed. In addition, an eight-chain model that can reasonably characterize the experimental data at different temperatures was proved. An explicit temperature-dependent constitutive model was developed based on the Arruda-Boyce model to describe the stress–strain response of filled rubber in a relatively large temperature range. Meanwhile, it was proved that the model can predict the effect of temperature on the hyperelastic behavior of filled rubber. Finally, the improved Arruda-Boyce model was used to obtain the material parameters and was then successfully applied to finite element analysis (FEA), which showed that the model has high application value. In addition, the model had a simple form and could be conveniently applied in related performance test of actual production or finite element analysis.
The thermomechanical and tribological properties of graphene (GNS)-reinforced NR were investigated using molecular dynamics (MD) simulations. The amorphous molecular dynamics models of two nanocomposites, i.e., natural rubber (pure NR) and graphene/natural rubber (GNS/NR), were established. In addition, the thermodynamic properties of the two materials, before and after the incorporation of graphene into the natural rubber matrix, were investigated through analytical comparison. The results showed that after the graphene was added to the rubber matrix as a reinforcing material, the elastic modulus and shear modulus were increased by 110% and 94.8%, respectively, the tensile property was increased by 178%, the overall thermal conductivity of the composite system was increased by 59%, the glass transition temperature increased from 223 K to 236 K, and the rigidity of the material matrix was significantly improved. The inherent interactions and wear mechanisms of the polymer nanocomposites were discussed at the atomic scale by analyzing the changes in temperature, atomic velocity, relative atomic concentration, and radial distribution functions at the friction interface in the thickness direction.
The microstructure and properties of a new type of carbon black produced by a domestic company through a new process were systematically characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Raman spectroscopy, and X-ray diffraction (XRD). The vulcanization properties, mechanical properties, and electrical conductivity of the new carbon black with different filler amounts were investigated in styrene butadiene rubber (SBR), using the traditional reinforcing filler N660 carbon black as a control. The experimental results demonstrate that the new carbon black exhibits a stratified structure with a specific surface area of 345.96 m2/g, and its particle size distribution is primarily concentrated within the 0.1–1 μm range. When the filling ratio was 30 phr/100 phr, the tensile strength of SBR composites filled with the new carbon black increased by 12.3% and the tear strength increased by 9.6% compared with those filled with N660 carbon black. In summary, the new carbon black can significantly improve the comprehensive performance of SBR composites and reduce the production cost. This provides a new type of material for the rubber industry that takes into account both economy and performance while also providing reference data for basic research in the field of SBR.
We have particularly investigated the correlation law of the effect of different carbon black fillings on the hyper-elastic mechanical behavior of natural rubber by conducting uniaxial tensile tests over a wide range of deformations with different volume fractions of carbon black fillings (0%, 4.7%, 8.9%, 12.8%, 16.4%, 19.7%, 22.7% and 25.2%). The results show that the stress-strain curve for carbon black filled rubber increases with the amount of filling, meaning that the rubber gradually becomes “harder”. We explore the correlation between the carbon black filling volume and the parameters of the Yeoh constitutive model by examining the Yeoh constitutive model to characterize the hyper-elastic mechanical behavior of rubber with different carbon black fillings. A quantitative relationship between the material parameters and the carbon black filling volume in the Yeoh constitutive model is presented. A method for calculating the material parameters of the Yeoh constitutive model is developed, and it predicts the correlation between the hyper-elastic properties of rubber and the volume fraction of the carbon black filling.