Pragyan Senapati

Dr. Pragyan Senapati

Siksha O Anusandhan Deemed to be University
orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 January 2021 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
Birupakshya MishraBirupakshya Mishra
Birupakshya Mishra
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
RMRabiranjan Murmu
Rabiranjan Murmu
Dibyani SahuDibyani Sahu
Dibyani Sahu
In this work, polypropylene (PP) and graphene nanoplatelet (GNPs) composites are routed through twin screw mixing and injection moulding. Two types of GNPs with a fixed size of 25 µm with surface areas ranging from 50–80 m2/g (H25, average thickness 15 nm) and 120–150 m2/g (M25, average thickness 6–8 nm) were blended with PP at loading rates of 1, 2, 3, 4, and 5 weight%. Mechanical properties such as tensile, flexural, and impact strengths and Young’s modulus (Ε) are determined. The X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), field emission scanning electron microscopy (FESEM), and polarised light microscopy (PLM) techniques are used to understand the crystallisation, thermal, dynamic mechanical, and structural behaviour of the prepared composites. The improvement of mechanical strength is observed with GNP loading for both grades. Decreasing the GNP thickness decreases the impact strength and on the other hand improves the tensile and flexural strengths and Young’s modulus. Maximum tensile (≈33 MPa) and flexural (≈58.81 MPa) strength is found for the composite carrying 5 wt% M25. However, maximum impact strength (0.197 J) is found for PP-5 wt% H25. XRD analysis confirms GNPs have an induction effect on PP’s β phase crystal structure. The PP-GNP composite exhibits better thermal stability based on determining the TD (degradation temperature), T10 (temperature at 10% weight loss), T50 (temperature at 50% weight loss), and TR (temperature at residual weight). Enhancement in melt (Tm) and crystallisation temperatures (Tc) is are observed due to a heterogeneous nucleation effect. The FESEM analysis concludes that the GNP thickness has a significant effect on the degree of dispersion and agglomeration. The smaller the thickness, the better is the dispersion and the lower is the agglomeration. Overall, the use of thinner GNPs is more advantageous in improving the polymer properties.

Verified
Journal Article
Open access
PDF file
Dibyani SahuDibyani Sahu
Dibyani Sahu
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
RMRabiranjan Murmu
Rabiranjan Murmu
DRDebashis Roy
Debashis Roy
Graphene has accomplished huge notoriety and interest from the universe of science considering its exceptional mechanical physical and thermal properties. Graphene is an allotrope of carbon having one atom thick size and planar sheets thickly stuffed in a lattice structure resembling a honeycomb structure. Numerous methods to prepare graphene have been created throughout a limited span of time. Due to its fascinating properties, it has found some extensive applications to a wide variety of fields. So, we believe there is a necessity to produce a document of the outstanding methods and some of the novel applications of graphene. This article centres around the strategies to orchestrate graphene and its applications in an attempt to sum up the advancements that has taken place in the research of graphene.

29 December 2022 in Inventions
Verified
Journal Article
Open access
PDF file
SPSarat Chandra Patra
Sarat Chandra Patra
SSSumit Swain
Sumit Swain
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
HSHimadri Sahu
Himadri Sahu
RMRabiranjan Murmu
Rabiranjan Murmu
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
The authors developed a nanocomposite using polypropylene (PP) and graphene nanoplatelets (GNPs) with a melt mixing method. Virgin PP was filled with three sets of GNPs with a fixed thickness (15 nm) and surface area (50–80 m2/g). The selected H-type GNPs had three different sizes of 5, 15 and 25 µm. The nanocomposites were made by loading GNPs at 1, 2 and 3 wt.%. Mechanical analysis was carried out by performing tensile, flexural and impact strength tests. The crystalline, micro-structural, thermal and dynamic mechanical properties were assessed through XRD, FESEM, PLM, DSC, TGA and DMA tests. It was observed that all three types of GNPs boosted the mechanical strength of the polymer composite. Increasing the nanofiller size decreased the tensile strength and the tensile modulus, increased the flexural strength and flexural modulus, and increased the impact strength. Maximum tensile strength (≈41.18 MPa) resulted for the composite consisting 3 wt.% H5, whereas maximum flexural (≈50.931 MPa) and impact (≈42.88 J/m) strengths were observed for nanocomposite holding 3 wt.% H25. Graphene induced the PP’s crystalline phases and structure. An improvement in thermal stability was seen based on the results of onset degradation (TD) and melting (Tm) temperatures. Graphene increased the crystallization (Tc) temperatures, and acted like a nucleating agent. The experimental analysis indicated that the lateral size of graphene plays an important role for the nanocomposite’s homogeneity. It was noted that the small-sized GNPs improved dispersion and decreased agglomeration. Thus overall, small-sized GNPs are preferable, and increasing the lateral size hardly establishes feasible characteristics in the nanocomposite.

1 July 2020 in Materials Research Express
Verified
Journal Article
Open access
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
For hydro turbine components High Velocity Oxy Fuel (HVOF) thermal spraying process was adopted for three different types of coatings i.e NiCrBSi-5%Al2O3 (N5A), NiCrBSi-10%Al2O3 (N10A) and NiCrBSi-15%Al2O3 (N15A) on Grade 420 Stainless steel, the coatings being characterized by Scanning Electron Microscope (SEM), x-ray Diffraction (XRD) and optical microscope. With measurements of surface roughness, thickness, micro hardness and porosity of the coatings, the erosion tests were conducted in a slurry-jet erosion tester at 30°, 60° and 90 ° impingement angles, jet velocity of 20 m s−1 and erodent size of 200 μm. The optical microscopy images of the coated samples exhibited lamella structure of the coatings. The N15A coating exhibits highest micro hardness value of 715 ± 31 HV0.3 followed by N10A (557 ± 22 HV0.3) and N5A (407 ± 15 HV0.3). The grade 420ss shows the lowest micro hardness value (272 ± 5 HV0.3). The surface morphology of the eroded samples was studied using SEM. The mechanisms involved in erosion of all the coated surfaces are removal of splats, lip formation, ploughing action and micro cutting whereas of bare steel, ploughing action, micro cutting and lip formation along with appearance of pores and craters. It was found that amongst the three coatings NiCrBSi-15%Al2O3 exhibited the lowest erosion and all the coatings offered better wear resistance than the uncoated steel.

Verified
Journal Article
Open access
PDF file
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
RMRabiranjan Murmu
Rabiranjan Murmu
SBShubhra Bajpai
Shubhra Bajpai
The composition of nickel-based metal matrix NiCrBSi was varied with 5%, 10% and 15% of Al2O3 particles to obtain high wear resistant coatings by means of a high-velocity oxy fuel (HVOF) thermal spraying process. The coating was characterized by optical microscope, scanning electron microscope (SEM) and X-ray diffractometer (XRD). The physical properties of coatings such as porosity, thickness, surface roughness, surface hardness, fracture toughness, bond strength and density were measured and compared. The experimental design of Taguchi L27 orthogonal array was employed to study and compare the effect of parameters such as impingement angle, impact velocity and alumina per cent in the coating on erosion. The coating containing 15 wt.% of Al2O3 and erodent speed of 33 m/s striking at inclination angle of 30° proved to be the best arrangement in preventing volume loss to a minimum of 0.00015 cc due to low-impact energy, high bond strength and high surface hardness. Analysis of variance (ANOVA) supported the assertion that the impact angle (A) of erodent and composition (C) were the factors contributing most to the volumetric loss as indicated by their combined effect A × C leading to the highest combined factor of 7.34. The scanning electron microscopy (SEM) images of the eroded coatings reveal that the mechanisms of erosion were the fracturing of splats, development of craters, micro cutting and ploughing action.

Verified
Journal Article
Open access
PDF file
RDRabindra Dharai
Rabindra Dharai
YCYubaraj Chakraborty
Yubaraj Chakraborty
RMRabiranjan Murmu
Rabiranjan Murmu
Pragyan SenapatiPragyan Senapati
Pragyan Senapati
Harekrushna SutarHarekrushna Sutar
Harekrushna Sutar
DRDebashis Roy
Debashis Roy
In this study, micrographite (μG)-reinforced polypropylene (PP) composites were fabricated using melt compounding, with μG contents varying from 3 to 15 wt%. The composites were evaluated for mechanical, electrical, and thermal performance, addressing a relatively underexplored area among carbon-based fillers. Tensile testing across elongation speeds (10–50 mm/min) showed up to ~30% strength improvement at 6 wt% μG due to good dispersion and stress transfer, while ≥9 wt% led to agglomeration, reduced ductility, and increased melt resistance. SEM fractography confirmed matrix–filler debonding and brittle behavior at higher loadings, with ductility improving at higher elongation rates. A sharp drop in resistivity near 6 wt% indicated the formation of a conductive network, and thermal conductivity improved by nearly 80%. Taguchi optimization identified 12 wt% μG and 50 mm/min as optimal for tensile strength, with filler content having a stronger influence than testing speed. The novelty of this work lies in its integrated structure–property investigation across a broad μG range, offering a scalable, multifunctional PP composite system suitable for semi-structural, conductive, and thermal management applications.