This work investigates the influence of strain rate on the stress/strain behaviour of Scalmalloy. This material is an aluminium–scandium–magnesium alloy, specifically developed for additive manufacturing. The bulk yield stress of the material processed by Selective Laser Melting is approximately 340 MPa which can be increased by heat-treating to approximately 530 MPa. These numbers, combined with the low mass density of 2.7 g/cm³, make Scalmalloy an interesting candidate for lightweight crash-absorbing structures. As this application is inherently dynamic, it is of interest to study the loading rate sensitivity, which is difficult to predict: Al–Sc alloys exhibit classic strain rate sensitivity with an increased yield stress at elevated strain rates. However, Al–Mg alloys are known to show the contrary effect, they exhibit less strength as strain rate is increased. To answer the question how these effects combine, we study the dynamic behaviour at four different strain rates ranging from 10⁻³ to 1000 /s using servo-hydraulic and split-Hopkinson testing methods. The resulting data is analysed in terms of strain rate sensitivity of tensile strength and failure strain. A constitutive model based on a simplified Johnson–Cook approach is employed to simulate the tensile tests and provides good agreement with the experimental observations.

Background: Measuring the dynamic behavior of low-impedance materials such as foams is challenging. Their low acoustic impedance means that sensitive force measurement is required. The porous structure of foams also gives rise to dynamic compaction waves, which can result in unusual behavior, in particular if the foam material is so thick, that dynamic force equilibrium is not reached. Objective: This work investigates comparatively large polyurethane foam specimens with densities in the range of 80 – 240 kg/m³ to deliberately achieve a state away from force equilibrium during high-rate compaction. The aim is to understand how an increase in strain rate leads to a reduction in strength for such materials. Methods: A specialized direct-impact Hopkinson bar is employed. It uses polycarbonate bars to achieve the required long pulse duration of 2.6 ms to compress the large specimens into the densification regime. In contrast to existing setups, both striker and output bar are instrumented with strain gauges to monitor force equilibrium. The absence of an input bar allows monitoring force equilibrium more accurately. Special attention is paid to the calibration of strain gauges, taking non-linear effects, wave dispersion and attenuation into account. Digital Image Correlation is employed to analyze elastic and plastic compaction waves by means of Lagrange diagrams. Results: Depending on density, the specimens show saturation of dynamic strength increase at high rates of strain $$\approx$$≈ 500 /s, or even negative strain rate sensitivity in case of the lowest density. The occurrence of apparent negative strain rate sensitivity is accompanied by a localized structural collapse front, moving at a low velocity of $$\approx$$≈ 10 m/s through the material. This apparent strain rate sensitivity is a structural effect which is related to the thickness of the specimen. Conclusions: The primary aim of material characterization using Hopkinson bars is to achieve a state of force equilibrium. For this reason, very thin specimens are usually employed. However, data gathered in this way is not representative for thick foam layers. Here, an increase of strain rate can lead to a decrease of strength if homogeneous deformation is replaced by a dynamic compaction wave. This behavior can occur at strain rates encountered under conditions such as automotive crash.

Studying the failure behaviour of engineered or natural materials under dynamic loading scenarios is of high importance, for example to investigate the fracture mechanics and to prevent catastrophic failures of constructions. When dynamic loading is coupled to high-speed X-ray imaging, not only surface information but images of the interior of the specimens during failure are accessible. Here, a custom designed Split Hopkinson Tension Bar (SHTB) coupled a Universal Testing Machine (UTM) has been developed, dedicated to study quasi-static and dynamic response using ultra-high speed X-ray phase contrast imaging. Both systems follow a compact design which allows them to be temporarily installed at a synchrotron beamline. A brief description of the installation and usage of these setups are outlined. Selected example applications outline the potential of these systems. Both systems can be considered for proposal experiments at beamline ID19 of the European synchrotron ESRF on request.

This work showcases a novel phenomenological method to create predictive simulations of metallic lattice structures. The samples were manufactured via laser powder bed fusion (LPBF). Simulating LPBF-manufactured metamaterials accurately presents a challenge. The printed geometry is different from the CAD geometry the lattice is based on. The reasons are intrinsic limitations of the printing process, which cause defects such as pores or rough surfaces. These differences result in material behavior that depends on the surface/volume ratio. To create predictive simulations, this work introduces an approach to setup a calibrated simulation based on a combination of experimental force data and local displacements obtained via global Digital Image Correlation (DIC). The displacement fields are measured via Finite Element based DIC and yield the true local deformation of the structure. By exploiting symmetries of the geometry, a simplified parametrized simulation model is created. The simulation is calibrated via Response Surface Methodology based on nodal displacements from FE-DIC combined with the experimental force/displacement data. This method is used to create a simulation of an anti-tetrachiral, auxetic structure. The transferability and accuracy are discussed, as well as the possible extension into 3D space.