The field evaluation of pile-soil combination is a key step in the service life evaluation of pile foundation. However, due to the time-varying nature of pile-soil interaction, there is no efficient method to accurately analyze it. This paper introduces a health monitoring technique for assessing the state of pile-soil bond. The transient vibration of pile-soil coupling was measured by piezoelectric ceramic sensor. In the experiment, the different bond states of pile and soil were simulated by taking clay of different density as an example. A horizontal force is applied to the top of the pile, and the induced stress wave is detected by piezoelectric ceramic intelligent aggregate sensor embedded in the pile. At the same time, taking the artificial separation of pile-soil as an example, the binding state of pile-soil is analyzed, and the influence of different soil conditions on the pile-soil bonding characteristics is studied. An energy index for quantitative evaluation of pile-soil binding quality is proposed. Taking piles buried in two layers of soil with different densities as an example, the effects of soil with different densities on pile-soil bonding characteristics were studied. Experimental and numerical results verified the effectiveness of the proposed method. The three factors influenced the pile-soil coupling. The experimental and numerical results verified the effectiveness of the proposed approach and pave the way for an approach to directly judge whether there is separation between the pile and soil and evaluate the pile safety.
As the mechanical properties of soil are affected by the moisture content, diameter of soil particles, and the soil temperature, we used piezoelectric ceramic sensors to monitor the freeze–thaw cycle of different soils at different temperatures and different moisture content. By studying the energy attenuation of stress waves propagating in freezing–thawing soil, its mechanical strength was determined. The results showed that the duration of freeze–thaw process was related to soil type and initial water content. For the same water content and larger soil particle size, the received signal amplitude and energy are larger. For the same soil type and higher water content, the received signal amplitude and energy are stronger. This study provides a feasible monitoring method for infrastructure construction in areas with complex geological conditions, such as Qinghai-Tibet frozen soil.
The in situ evaluation of pile‐soil bonding condition plays an important role for pile safety assessment in its life cycle. However, so far, there is still no fully mature tool to analyze such couplings, since the pile‐soil coupling exhibits complex and time‐varying relationships. This paper innovatively proposes a health monitoring approach to evaluate the bonding status of the soil and pile contact area. An impact method based on a piezoelectric ceramic sensor is proposed to monitor the bond of pile and soil. A horizontal impact was introduced near the top of the pile, and the induced stress waves were detected by the piezoceramic smart aggregate (SA) sensor embedded in the pile. Different crack damage sizes were made between the soil and the pile to investigate the change of the bonding. An energy index was developed to quantitatively evaluate the quality of the bonding as a pile‐soil bonding index. The proposed approach inspired a potential way to directly judge if there is crack damage between the pile and soil and to evaluate pile safety.
Composite materials composed of multiferroelectric nanoparticles in dielectric matrixes have attracted enormous attention for their potential applications in developing future functional devices. However, the functionalities of ferroelectric nanoparticles depend on shapes, sizes, and materials. In this paper, a time-dependent Landau-Ginzburg method has been used and combined with a method as the coupled-physics finite-element-method-based simulations are used to illustrate the polarization behavior in isolated BaTiO3 or PbTiO3 octahedral nanoparticles embedded in a dielectric medium, like SrTiO3 (ST, high dielectric permittivity) and amorphous silica (a-SiO2, low dielectric permittivity). The equilibrium polarization topology of the octahedral nanoparticle is strongly affected by the choice of inclusion and the size of matrix materials. Also, there are three equilibrium polarization patterns, i.e., monodomain, vortex-like, and multidomain, because of the various sizes and material parameters combination. There is a critical particle size below which ferroelectricity vanishes in our calculations. This size of the PbTiO3 octahedral nanoparticle is 2.5 and 3.6 nm for high- and low-permittivity matrix materials, respectively. However, this size of the BaTiO3 octahedral nanoparticle is 3.6 nm regardless of the matrix materials.
Large temperature differences exist between the winter and summer seasons in different regions of China. Such temperature differences, caused by seasonal changes, may affect the life cycles of piles. Under natural conditions, such as long-term operation under the ambient environment and loads, piles and the surrounding soil undergo peel damage. To study such peel damage between the pile and soil at different temperatures, we installed concrete test piles in soil and subjected them to different temperatures. A crack with a width of 2 cm, depth of 10 cm, and damage range of 90° was applied at the side of the piles. Furthermore, a horizontal impact load was applied near the top of the pile and a piezoelectric ceramic sensor was used to obtain the stress wave response signals. The experimental results reveal that with a decrease in the soil temperature, the amplitude and fluctuation range of the signals received by the piezoelectric sensor decreased. According to the experimental results, in the group with the greatest influence of temperature, keeping other conditions unchanged and setting different crack depths, the horizontal impact load can also be introduced to observe the frequency change. It can be observed that the larger the crack depth, the smaller the frequency. Finally, ABAQUS was used for simulations, whose results were found to be consistent with those of the experiments. This paper describes a method for determining the safety of soil and piles with peel damage at different temperatures, and it also provides a validation of the necessity of holding the rest constant.