MXenes, a new class of two-dimensional materials with excellent performance, are promising materials for wearable energy storage devices. However, the lack of sufficient interaction between various MXene particles makes it difficult to translate the exceptional performance from the nanoscale to macroscale. Additionally, the intrinsic characteristic of easy oxidation limits their practical applications. Herein, inspired by the structure of wood, a biomimetic core–shell MXene@graphene oxide (MX@GO) fiber was fabricated using GO as a mechanical layer to wrap MXenes. The GO layer could easily assemble MXene particles into macroscale materials and protect them from oxidation. Therefore, the as-fabricated core–shell MX@GO fiber showed a high tensile strength (290 MPa) and excellent electrical conductivity (2400 S m−1). Notably, the conductivity of the biomimetic fiber only decreased to 1800 S m−1 with a reduction of about 30% at 100 °C. This work paves the way to fabricate MXene-based fibers with freely designed functionalities and morphologies, which are suitable for various high-value fabric-based applications.
Carbon nanotube (CNT) coatings were utilized to enhance the interfacial properties of carbon fiber (CF)/epoxy(EP) composites by ultrasonically assisted electrophoretic deposition (EPD). A characterization of the CF surface properties was done before and after coating (surface chemistry, surface morphologies, and surface energy). The result shows that oxygenated groups concentrations of the CF surfaces experienced significant increases from 12.11% to 24.78%. Moreover, the uniform and homogeneous CNT films were tightly attached on the surface of CF, and the surface wettability of CF is significant improved by enhanced surface free energy when introduced ultrasonic during the EPD process. In addition, the interlaminar shear strength (ILSS) and water absorption of CF/EP composite were measured. Scanning electron microscopy (SEM) revealed that the fracture mechanisms of the new interface layer formed by depositing CNTs on the CF surface contributed to the enhancement of the mechanical performance of the epoxy. This means that the efficient method to improve interfacial performance of composites has shown great commercial application potential.