Light scattering and radiative transfer in optically soft particle systems are important problems in many fields of natural sciences and engineering, such as biology, ocean optics, atmospheric science, solar energy utilization, and so on. Due to the effects of particle agglomeration and dependent scattering, the radiative transfer problem will become more complex with the increase of particle volume fraction. In this study, the scattering properties and radiative transfer characteristics of densely packed optically soft particle systems, with consideration of the effects of dependent scattering and particle agglomeration, are investigated. The dependent scattering properties of densely packed silicon-dioxide spherical particles embedded in water are calculated by using the Lorenz–Mie theory and Percus–Yevick sticky hard-sphere model. The directional-hemispherical reflectance of the dispersed plane–parallel layer is obtained by using the Monte Carlo method. The results show that dependent scattering and particle agglomeration have significant influence on the scattering properties of particles. With the increase of particle agglomeration degree, the scattering coefficients and asymmetry factors of the particles increase obviously, which can be even larger than the results for independent scattering under certain circumstances. Due to the combined interaction of multiple scattering, dependent scattering, and particle agglomeration, for different size particles, the variation tendency of the hemispherical reflectance is obviously different with increasing particle agglomeration degree.
The optical constants of sodium chloride (NaCl), potassium chloride (KCl), magnesium chloride (), calcium chloride () and sodium sulfate () solutions at weight fractions ranging from 0 to 16.6667% are measured by the combined ellipsometry-transmission method in the spectral range 0.3–1.0 μm. In the combined method, a modified ellipsometry method is used to measure the refractive indices of liquids, and then the transmission method is conducted to obtain the extinction coefficients using the refractive indices obtained by the ellipsometry method. The experimental refractive indices of these binary solutions are utilized to obtain a mole-fraction weighted mixing rule, which relates the refractive index of multi-component mixed-salt solutions to the wavelength and concentration of each component. The effects of wavelength and concentration are taken into account by empirical expressions of the Lorentz–Lorenz formulized molar refraction. A mole-fraction weighted linear combined mixing rule is proposed to study the wavelength and concentration-dependent extinction coefficients of mixed-salt solutions. The optical constants of NaCl-KCl and ternary solutions, quaternary solutions, and multi-component solutions are measured to verify the mixing rules. The results show that the optical constants calculated based on the mixing rules are in good agreement with experimental data, which demonstrate the feasibility of the proposed mixing rules. As the experimental analysis indicates, both the refractive indices and the extinction coefficients of the saline solutions increase with solute concentrations in the spectral range 0.3–1.0 μm.
Proton exchange membrane fuel cells (PEMFCs) are known for their cleanliness and high efficiency. However, the limited energy density and high cost are the main obstacles to this technology. This study aims to overcome these challenges and enhance the overall performance of the PEMFC. Five types of PEMFCs with different blockages are proposed and simulated in this study. Afterward, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method is performed as a multiobjective evaluation. This study shows that the nozzle effect in the channel enhances the mass transfer of PEMFC and improves water and thermal management, resulting in a reduction of liquid water by up to 35.8%. The blockages benefit the output performance of the PEMFC. For example, the elliptical blockage shows the highest improvement in electrochemical conversion efficiency at 3.42%. The TOPSIS examines indices of power, exergy, economy, environment, and water and thermal management. The multiobjective evaluation shows that the elliptical blockage is more beneficial for PEMFC. This study provides an optimized design of the PEMFC flow channel and a new perspective to evaluate the structural improvement of PEMFC.
The temperature and pressure-dependent dielectric functions of liquids are of great importance to the thermal radiation transfer and the diagnosis and control of fuel combustion. In this work, we apply the state-of-the-art ab initio molecular dynamics (AIMD) method to calculate the infrared dielectric functions of liquid methanol at 183–573 K and 0.1–160 MPa in the spectral range 10−4000 cm−1, and study the temperature and pressure effects on the dielectric functions. The AIMD approach is validated by the Infrared Variable Angle Spectroscopic Ellipsometry (IR-VASE) experimental measurements at 298 K and 0.1 MPa, and the proposed IR-VASE method is verified by comparison with paper data of distilled water. The results of the AIMD approach agrees well with the experimental values of IR-VASE. The experimental and theoretical analyses indicate that the temperature and pressure exert a noticeable influence on the infrared dielectric functions of liquid methanol. As temperature increases, the average molecular dipole moment decreases. The amplitudes of dominant absorption peaks reduce to almost one half as temperature increases from 183 to 333 K at 0.1 MPa and from 273 to 573 K at 160 MPa. The absorption peaks below 1500 cm–1 show a redshift, while those centered around 3200 cm–1 show a blueshift. Moreover, larger average dipole moments are observed as pressure increases. The amplitudes of dominant absorption peaks increase to almost two times as pressure increases from 1 to 160 MPa at 373 K.