During the past two decades, one–dimensional (1D) metal–oxide nanowire (NW)-based molecular sensors have been witnessed as promising candidates to electrically detect volatile organic compounds (VOCs) due to their high surface to volume ratio, single crystallinity, and well-defined crystal orientations. Furthermore, these unique physical/chemical features allow the integrated sensor electronics to work with a long-term stability, ultra-low power consumption, and miniature device size, which promote the fast development of “trillion sensor electronics” for Internet of things (IoT) applications. This review gives a comprehensive overview of the recent studies and achievements in 1D metal–oxide nanowire synthesis, sensor device fabrication, sensing material functionalization, and sensing mechanisms. In addition, some critical issues that impede the practical application of the 1D metal–oxide nanowire-based sensor electronics, including selectivity, long-term stability, and low power consumption, will be highlighted. Finally, we give a prospective account of the remaining issues toward the laboratory-to-market transformation of the 1D nanostructure-based sensor electronics.
In this study, we report on the rapid preparation of WO3 nanoplates decorated with noble metals and evaluate their gas-sensing performance using a high-throughput screening technique. The incorporation of Pd significantly enhanced the gas-sensing properties, and, among all of the samples tested, the WO3 nanoplate containing 0.3 mol% Pd exhibited the highest response to 100 ppm xylene at 250 °C (Ra/Rg = 131.2), which was almost 56 times greater than that of the pure WO3 sample. Additionally, this sample demonstrated rapid response and recovery times (τresponse = 3.9 s and τrecovery = 189.2 s, respectively). The nanoplate samples were also classified and screened using cluster analysis, and the selected samples were optimized for use in a sensor array. By applying principal component analysis and Fisher discriminant analysis, four typical gases were identified and a potential sensitization mechanism was elucidated.
Interfacial adhesion between sensing layer and supporting substrate critically governs the long-term stability of electrical molecular sensors. However, achieving a robust heterointerface remains challenging due to intrinsic lattice mismatch that induces localized stress, which would be further amplified during repeated interactions between the sensing film and gas analytes. Here, we introduce a floating-structure palladium hydrogen (H 2 ) sensor enabled by interfacial stress decoupling through a dithiol-based self-assembled monolayer (SAM). This interfacial layer acts as a molecular bridge between the palladium sensing layer and the substrate electrode, forming a dual-interface architecture that simultaneously mitigates interfacial stress and suppresses substrate clamping effects, thereby accelerating H₂ absorption kinetics. The resulting sensor demonstrates an ultra-stable and cyclable H 2 detection, featuring a projected operational lifespan exceeding 10 years, and an ultrasensitive detection limit of 1 ppm at room temperature. Moreover, we achieve wafer-scale fabrication and integration of the device into a portable platform for real-time hydrogen leak detection. This work establishes a structurally engineered pathway toward durable and high-performance molecular sensor via interfacial stress management.