This document presents a comprehensive review of research works, regulatory frameworks, technical solutions, and commercial trends related to the integration of shallow geothermal energy (SGE) technologies in modern 5th-generation district heating and cooling (5GDHC) networks. This literature and market analysis is contextualized by the present geopolitical, environmental, and societal scenario in Europe. In this sense, decarbonization of the heating and cooling sector is a crucial piece in the energy transition puzzle to keep global warming below the critical threshold of 1.5 °C by the next century. Moreover, Ukraine war has added urgency to end up with fossil fuel dependency. The most relevant outcome of this literature review is the synergistic relationship between SGE, 5GDHC networks, and urban environments. SGE is most efficiently deployed in urban environments when it is part of a district heating and cooling network, and the modern concept of 5GDHC is the most suitable scenario for it. Since the potential contribution of SGE to the decarbonization of the heating and cooling supply is mostly untapped across Europe, this synergistic effect represents a possible boost. Hybridization with solar photovoltaics and/or storage makes it even more attractive. Outstanding cases are reviewed, challenges for the future are presented, and tools to overcome social reluctance and/or lack of awareness are described, along with a discussion of the stimuli for the deployment of SGE and 5GDHC networks. A particular focus on Mediterranean countries is presented, where SGE systems and DHC networks of any kind show a particularly low deployment compared to the rest of Europe. To this end, the second part of this work evaluates, justifies, and analyzes the possibilities and potentialities of their application in this zone.

Estimated natural background levels (NBLs) are needed to assess groundwater chemical status according to the EU Groundwater Directive. They are commonly derived for different substances by applying statistical methodologies. Due to the complexity of the sea water intrusion process, some of those methods do not always provide appropriate assessment of chloride NBLs. This paper analyzes the applicability of different NBL estimation methods in five EU coastal aquifers with significant differences in available datasets and hydrogeological settings. A sensitivity analysis of results to different constraints was performed to remove samples with anthropogenic impacts. A novel statistical approach combining different methods to identify the range of chloride NBLs is proposed. In all pilots the estimated NBLs were below 85 mg/L and fitted well with previous studies and expert judgment, except Campina del Faro aquifer (the maximum being 167.5 mg/L). Although this approach is more time consuming, it provides a more robust solution.

The Port del Comte Massif (SE, Pyrenees) contains one of the most important vulnerable and strategic karst aquifers for supplying freshwater to the city of Barcelona (Spain). It is a fragile system, whose possible environmental impact is highly conditioned by land use. To improve the hydrogeological knowledge of the system, between September 2013 and October 2015, a detailed fieldwork was carried out for the revision of the geological model, the inventory of water points, and the in situ physico-chemical characterization on major elements and isotopes of up to a total of 43 springs, as well as precipitation water. This paper focuses on the characterization of the geochemical processes that allow explanation of the observed chemical variability of groundwater drained by the pristine aquifer system to determine the origin of salinity. The results show that the main process is the dissolution of calcite and dolomite, followed by gypsum and halite, and a minor cation exchange-like process. Sulfur and oxygen isotopes from dissolved sulfate in the studied springs point out a geogenic origin related to the dissolution of gypsum from Triassic and Tertiary materials, and that the contribution from anthropogenic sources, like fertilizers, is lower. Nitrate in groundwater is not an important issue, with a few localized cases related with agricultural activities. The multidisciplinary approach has allowed the development of a consistent hydrogeological conceptual model of the functioning of the aquifer system, which can be replicated in other places to understand the geogenic character of the hydrogeochemistry.

The assessment of the deep geothermal potential is an essential task during the early phases of any geothermal project. The well-known “Heat-In-Place” volumetric method is the most widely used technique to estimate the available stored heat and the recoverable heat fraction of deep geothermal reservoirs at the regional scale. Different commercial and open-source software packages have been used to date to estimate these parameters. However, these tools are either not freely available, can only consider the entire reservoir volume or a specific part as a single-voxel model, or are restricted to certain geographical areas. The 3DHIP-Calculator tool presented in this contribution is an open-source software designed for the assessment of the deep geothermal potential at the regional scale using the volumetric method based on a stochastic approach. The tool estimates the Heat-In-Place and recoverable thermal energy using 3D geological and 3D thermal voxel models as input data. The 3DHIP-Calculator includes an easy-to-use graphical user interface (GUI) for visualizing and exporting the results to files for further postprocessing, including GIS-based map generation. The use and functionalities of the 3DHIP-Calculator are demonstrated through a case study of the Reus-Valls sedimentary basin (NE, Spain).

The distribution of the high concentrations of arsenic (As) and fluoride (F-) in groundwater on a Pan-European scale could be explained by the geological European context (lithology and structural faults). To test this hypothesis, seventeen countries and eighteen geological survey organizations (GSOs) have participated in the dataset. The methodology has used the HydroGeoToxicity (HGT) and the Baseline Concentration (BLC) index. The results prove that most of the waters considered in this study are in good conditions for drinking water consumption, in terms of As and/or F-content. A low proportion of the analysed samples present HGT >= 1 levels (4% and 7% for As and F-, respectively). The spatial distribution of the highest As and/or F-concentrations (via BLC values) has been analysed using GIS tools. The highest values are identified associated with fissured hard rock outcrops (crystalline rocks) or Cenozoic sedimentary zones, where basement fractures seems to have an obvious control on the distribution of maximum concentrations of these elements in groundwaters.

The Water Framework Directive (WFD) requires EU member states to assess the chemical status of groundwater bodies, a status defined according to threshold values for harmful elements and based on/the natural background level (NBL). The NBL is defined as the expected value of the concentration of elements naturally present in the environment. The aim of this study is to propose a methodology that will be broadly applicable to a wide range of conditions at the regional and national scale. Using a statistical approach, the methodology seeks to determine NBLs for SO₄, As, Cd, Cr, Cu, Ni, Zn, and F based on the lithology of aquifers from which groundwater monitoring data were collected. The methodology was applied in six EU countries to demonstrate validity for a wide range of European regions. An average concentration was calculated for each parameter and chosen water point and linked to a lithology. Based on the dataset created, significant differences between lithologies and pressure categories (urban, agricultural, industrial, and mining) were tested using a nonparametric test. For each parameter, 90th percentiles were calculated to provide an estimation of the maximum natural concentrations possible for each lithology.