The performance of a photovoltaic (PV) array depends on temperature, radiation, shading and load size. Conventional maximum power point tracking (MPPT) methods have acceptable efficiencies under uniform conditions (irradiance = 1000 W/m2 and temprature = 25 °C), but in dynamic weather conditions, load changes, and also in partial shading conditions due to the presence of several local maximum power points (MPP) in the P-V characteristic, the conventional tracking method does not work well in finding the main MPP. To extract maximum power in all condi-tions, many algorithms have been proposed, all of which have limitations in terms of convergence speed, output power ripple and efficiency. This research proposes an optimized Fuzzy Logic Controller (FLC) based on the Cuckoo Opti-mization Algorithm (COA) for MPPT under uniform conditions, dynamic weather conditions, partial shading and under load changes. Finally, the research compared the simulation results with four other popular methods. According to the simulation observations and the result, COA-FLC overcomes the mentioned limitations such as low convergence speed, output power ripple and low tracking efficiency in all conditions. Simulations are performed with MATLAB / Simulink software.
This paper presents a new version of the incremental conductance algorithm for more accurate tracking of the maximum power point (MPP). The modified algorithm is called self-predictive incremental conductance (SPInC), and it recognizes the operational region. It is capable of detecting dynamic conditions, and it detects sudden changes in power resulting from changes in the intensity of radiation or temperature. By selecting the appropriate step size, it obtains maximum power from the panel at any moment. The improved algorithm reduces output power ripple and increases the efficiency of the system by detecting the operating area and selecting the appropriate step size for each region. The SPInC algorithm divides the system’s work areas into three operating zones. It calculates the size of the appropriate step changes for each region after identifying the regions, which allows for more accurate tracking of the MPP and increases the system efficiency at a speed equal to the speed of the conventional method. These additional operations did not result in a system slowdown in the tracking maximum power. According to the MATLAB/Simulink simulation results, the SPInC algorithm is more efficient than conventional InC, and the ripple output power is reduced. SPInC is also compared to the improved perturb and observe (P&O) algorithm. In general, SPInC can compete with the popular algorithms that have been recently proposed for MPPT in the other researches.