The case study presented here deals with the Pb-Zn-Cu skarn ores hosted in the Rosas Shear Zone (RSZ), a highly strained domain located in the external zone of the Sardinian Variscan chain. The RSZ is characterized by several tectonic slices of Cambrian limestones within a strongly folded and foliated Cambrian-Ordovician siliciclastic succession, intruded by late Variscan granites and mafic dykes. Based on geological mapping, structural and microscope analyses, our results show that the skarn ores in the RSZ are an example of passive structurally controlled mineralization. The RSZ was structured close to the brittle–ductile transition and, once exhumed to shallower crustal levels, acted as plumbing system favoring a large-scale granite-related fluid circulation. The paragenesis and the mineralization style of the skarn vary slightly according to the peculiarity of the local structural setting: a tectonic slice adjacent to the mafic dyke; an intensely sheared zone or a discrete thrust surface.

Southwestern Sardinia, Italy, hosts several skarn, W–Sn–Mo greisen and hydrothermal deposits related to a 289±1 Ma Late Variscan granite suite. Among them, the most representative scheelite-bearing skarns belong to the San Pietro and Sinibidraxiu localities, in the Monte Tamara area, Sulcis region. The San Pietro deposit is a typical calc-silicate skarn whereas Sinibidraxiu is a sharply bounded orebody hosted in a marble unit. Optical petrographic observations and compositional data of major and trace elements were obtained for samples from both localities. San Pietro data suggests evolution from an oxidising prograde skarn stage (andradite–diopside, hematite and scheelite), to progressively more reducing conditions from the early retrograde (magnetite–cassiterite) to the late sulfide stage (arsenopyrite, stannite, molybdenite, Bi sulfosalts and Zn–Cu–Pb–Fe sulfides); Sinibidraxiu has diffuse carbonate–quartz intergrowths pseudomorphic over an early mineral assemblage with fibrous habit, followed by abundant ore mineral precipitation under reducing conditions (scheelite, arsenopyrite and Pb–Zn–Cu–Fe sulfides). Geothermometers indicate a comprehensive temperature range of 460–270°C for the sulfide stages of both deposits. The differences between the two deposits might be controlled by the distance from the source intrusion coupled with the different reactivity of the host rocks. The San Pietro mineralogy represents a more proximal skarn, contrasting with more distal mineralogical and chemical features characterising the Sinibidraxiu orebody (lack of Mo–Sn–Bi phases; LREE–MREE–HREE signature of scheelite). This investigation contributes for the first time to the identification of a W–Sn skarn system in SW Sardinia, thereby suggesting the Monte Tamara area and its surroundings as favourable for further exploration.

Since the early Paleozoic, numerous metallogenic events produced in the Sardinian massif a singular concentration of mineral deposits of various kinds. Among them, the Variscan metallogenic peak represents a late Paleozoic phase of diffuse ore formation linked to the tectonomagmatic evolution of the Variscan chain. Two main classes of ores may primarily be attributed to this peak: (1) mesothermal orogenic-type As-Au ± W ± Sb ores, only found in E Sardinia, and (2) intrusion-related Sn-W-Mo-F and base metals-bearing ores found in the whole Sardinian Batholith, but mainly occurring in central–south Sardinia. Both deposit classes formed diachronously during the Variscan post-compressional extension. The orogenic-type ores are related to regional-scale flows of mineralizing fluids, and the intrusion-related ores occur around fertile intrusions of different granite suites. Metallogenic reconstructions suggest almost entirely crustal processes of mineralization without a significant contribution from the mantle. We summarized these processes with a holistic approach and conceptualized the Sardinian Variscan Mineral System (SVMS), a crustal-scale physical system of ore mineralization in the Sardinian basement. The SVMS required suitable metal sources in the crust and diffuse crustal reworking triggered by heat that allowed (a) the redistribution of the original metal budget of the crust in magmas by partial melting and (b) the production of metal-bearing fluids by metamorphic dehydration. Heat transfer in the Sardinian Variscan crust involved shear heating in lithospheric shear zones and the role of mantle uplift as a thermal engine in an extensional tectonic setting. Lithospheric shear zones acted as effective pathways in focusing fluid flow through a large-scale plumbing system into regional-scale structural traps for ores. Pre-Variscan metal sources of metallogenic relevance may have been (1) the magmatic arc and magmatic arc-derived materials of Ordovician age, extensively documented in E Sardinia crust, and (2) an inferred Precambrian crystalline basement lying under the Phanerozoic crustal section, whose presence has been assumed from geophysical data and from petrological and geochemical characteristics of granite suites. At shallower crustal levels, important contributions of metals may have come from pre-Variscan ore sources, such as the Pb-Zn MVT Cambrian ores of SW Sardinia or the REE-bearing Upper Ordovician paleoplacers of E Sardinia.

Acid mine drainage (AMD) prevention or remediation is a major issue of the environmental management of sulfide-bearing active and abandoned mining sites, the main sources of acidic waters being wastes and tailings. The present work intends to check a circular economy approach to such issues in the mining region of Sardinia, where environmental pollution, due to AMD, is a major concern. Tests were conducted on basic drainage-producing feldspar mining wastes that could be recycled as buffering agents of sulfide-bearing tailings. Among the sulfide-bearing abandoned mining sites investigated, Furtei epithermal gold deposit tailings are the most polluting and those that can better test the buffering agent efficacy. Buffering test results show that buffering to near-neutral conditions can be attained following steps similar to those of pure calcite buffer. The buffering potential of the recycled waste is due to both the buffer calcite content, which provides short-term buffering, enhanced by feldspar content that can provide long-term buffering. Buffered waters show a dramatic decrease in the concentration of most of the metals present in the leachate, down to conditions that meet the requirements for the discharge of industrial waters according to Italian legislation.

The SW Sardinian basement hosts various ore deposits linked to geological processes active from Cambrian to post-Variscan times. In particular, the Southern Arburèse district hosts several granite-related W-Sn-Mo deposits and a 10 km-long system of Ni-Co-As-Bi-Ag ± Au bearing five-element veins. New investigations into the eastern and central parts of the district (Pira Inferida mine sector) were performed to understand the poorly documented spatial and metallogenic relationships between these systems. The granite-related deposits consist of massive wolframite-quartz (W-Bi-Te-Au) and molybdenite-quartz veins, linked to the early Permian (289 ± 1 Ma) Mt. Linas granite, that are cross-cut by the five-element veins. The wolframite-quartz veins, observed by optical and electron (SEM-EDS) microscopy, show abundant native Bi, Bi-Te phases and native Au suggesting a W-Bi-Te-Au hydrothermal system. The five-element veins exhibit breccia and cockade textures, enveloping clasts of the Ordovician host-rocks and locally small fragments of the earlier W-Mo-quartz veins. The five-element vein paragenesis includes three main stages, from older to younger: (1) native elements (Bi ± Au); (2) Ni-Co arsenides-sulfarsenides in quartz gangue; and (3) Pb-Zn-Cu ± Ag sulfides in siderite gangue. The mineralogical, geochemical and isotopic features of the five-element vein swarm are closely comparable to five-element deposits elsewhere in Europe (Germany, Switzerland, Italian Alps). While the source of Ni and Co is still unknown, the high Bi contents, as well as Au enrichment in the five-element veins, suggest selective remobilization of these elements, and perhaps others, from the granite-related W-Bi-Te-Au veins. The five-element vein system was likely formed during a post-289 ± 1 Ma and post-Variscan metallogenic event.

The Rosas Shear Zone (RSZ) is a 1 km thick brittle-ductile shear zone that outcrops in the Variscan fold and thrust belt foreland of SW Sardinia, where several important ore deposits were mined in the last century. The RSZ lies in the footwall and strikes parallel to the NE-dipping regional thrust that separates the Variscan foreland from the nappe zone. Two thrusts that developed along the limbs of two km-scale overturned antiforms, with NE-dipping axial plane, bound the RSZ. The folds show a SW-facing direction and a well-developed axial plane cleavage, and affect a lower Cambrian-upper Ordovician stratigraphic succession mainly made, from bottom to top, by a sequence about 200 m thick of dolostones and massive limestone followed by 50 m of marly limestones overlain by about 150 m of sandstones, pelites and siltstones, finally unconformable capped by conglomerates and siltstones, ranging in thickness from a few to 200 m. Differently, within the RSZ the bedding is completely transposed along the cleavage and its internal structure is characterized by anastomosing thrusts that affect the stratigraphic succession defining map-scale slices mainly consisting of dolostones and limestones embedded into the siliciclastic formations. It is noteworthy the occurrence of a NE-dipping, up to 100 m thick gabbro-dyke that postdates the deformation phases and that can be related to the exhumation of the chain during late Carboniferous-Permian times.In the whole area, contact metamorphic and metasomatic processes selectively affected the Cambrian carbonate tectonic slices, originating several skarn-type orebodies. Mineralized rocks display the mineralogical assemblages and textures of Fe-Cu-Zn skarns, with relicts of anhydrous calcic phases related to the prograde metamorphic stage (garnet, clinopyroxene, wollastonite), frequently enclosed in a mass of hydrous silicates (actinolitic amphibole, epidote) and magnetite related to the retrograde metasomatic stage, in turn followed by chlorite, sulfides, quartz and calcite associated to the hydrothermal stage. Metasomatic reactions also involved mafic rocks, producing a mineral association marked by clinopyroxene, amphibole, epidote, prehnite and Ba-rich K-feldspar. Sulfide ores are made of prevailing sphalerite, chalcopyrite and galena, with abundant pyrite and pyrrhotite and minor tetrahedrite and Ag-sulfosalts. Garnets are andraditic/grossularitic, distinctly zoned and optically anisotropic. Field surveys pointed out the tight structural controls on skarn and ore formation. On a local scale, the gabbro emplacement along high- to low-angle NNW-SSE structures bordering the carbonate tectonic slices accentuate the effects of contact metamorphism, and metric to decametric mineralogical zonation (garnet→pyroxene→wollastonite) are recognized. On a larger scale, extensive hydrothermal fluid circulations involved the structures of the RSZ. Infilling of metasomatic fluids in carbonate tectonic slices is fault-controlled and aided by the increase in permeability due to the alteration of prograde silicates. The causative intrusion related to skarn ores belongs to the early Permian (289±1 Ma) ilmenite-series, ferroan granite suite which intrudes the RSZ about 3 km east from the studied area. The Fe-Cu-Zn skarn ores of Rosas are best interpreted as distal, structurally-controlled orebodies, connected to large-scale circulation of granite-related fluids in the km-sized plumbing system represented by the RSZ.