Applications of remote sensing using unmanned aerial vehicle (UAV) in agriculture has proved to be an effective and efficient way of obtaining field information. In this study, we validated the feasibility of utilizing multi-temporal color images acquired from a low altitude UAV-camera system to monitor real-time wheat growth status and to map within-field spatial variations of wheat yield for smallholder wheat growers, which could serve as references for site-specific operations. Firstly, eight orthomosaic images covering a small winter wheat field were generated to monitor wheat growth status from heading stage to ripening stage in Hokkaido, Japan. Multi-temporal orthomosaic images indicated straightforward sense of canopy color changes and spatial variations of tiller densities. Besides, the last two orthomosaic images taken from about two weeks prior to harvesting also notified the occurrence of lodging by visual inspection, which could be used to generate navigation maps guiding drivers or autonomous harvesting vehicles to adjust operation speed according to specific lodging situations for less harvesting loss. Subsequently orthomosaic images were geo-referenced so that further study on stepwise regression analysis among nine wheat yield samples and five color vegetation indices (CVI) could be conducted, which showed that wheat yield correlated with four accumulative CVIs of visible-band difference vegetation index (VDVI), normalized green-blue difference index (NGBDI), green-red ratio index (GRRI), and excess green vegetation index (ExG), with the coefficient of determination and RMSE as 0.94 and 0.02, respectively. The average value of sampled wheat yield was 8.6 t/ha. The regression model was also validated by using leave-one-out cross validation (LOOCV) method, of which root-mean-square error of predication (RMSEP) was 0.06. Finally, based on the stepwise regression model, a map of estimated wheat yield was generated, so that within-field spatial variations of wheat yield, which was usually seen as general information on soil fertility, water potential, tiller density, etc., could be better understood for applications of site-specific or variable-rate operations. Average yield of the studied field was also calculated according to the map of wheat yield as 7.2 t/ha.

Design and performance of a robotic arm for farm use

Multi-temporal monitoring of wheat growth by using images from satellite and unmanned aerial vehicle

FVC (fractional vegetation cover) is highly correlated with wheat plant density in the reviving period, which is an important indicator for conducting variable-rate nitrogenous topdressing. In this study, with the objective of improving inversion accuracy of wheat plant density, an innovative approach of retrieval of FVC values from remote sensing images of a UAV (unmanned aerial vehicle) was proposed based on the mixed pixel decomposition method. Firstly, remote sensing images of an experimental wheat field were acquired by using a DJI Mini UAV and endmembers in the image were identified. Subsequently, a linear unmixing model was used to subdivide mixed pixels into components of vegetation and soil, and an abundance map of vegetation was acquired. Based on the abundance map of vegetation, FVC was calculated. Consequently, a linear regression model between the ground truth data of wheat plant density and FVC was established. The coefficient of determination (R²), RMSE (root mean square error), and RRMSE (Relative-RMSE) of the inversion model were calculated as 0.97, 1.86 plants/m², and 0.677%, which indicates strong correlation between the FVC of mixed pixel decomposition method and wheat plant density. Therefore, we can conclude that the mixed pixel decomposition model of the remote sensing image of a UAV significantly improved the inversion accuracy of wheat plant density from FVC values, which provides method support and basic data for variable-rate nitrogenous fertilization in the wheat reviving period in the manner of precision agriculture.

The present study focused on the development, optimization, and performance evaluation of a harvesting robot for heavyweight agricultural products. The main objective of developing this system is to improve the harvesting process of the mentioned crops. The pumpkin was selected as a heavyweight target crop for this study. The main components of the robot consist of mobile platforms (the main robot tractor and a parallel robot tractor), a manipulation system and its end-effector, and an integrated control unit. The development procedure was divided into four stages: stage I (designed system using Solidworks), stage II (installation of the developed system on a temporary platform), stage III (developed system on an RT-1 (Yanmar EG453)), and stage IV (developed system on an RT-2 (Yanmar YT5113)). Various indicators related to the performance of the robot were evaluated. The accuracy of 5.8 and 4.78 mm in x and y directions and repeatability of 5.11 mm were observed. The harvesting success rate of 87~92%, and damage rate of 5% resulted in the evaluation of the final version. The average cycle time was 35.1 s, 42.6 s, and 43.2 s for stages II, III, and IV, respectively. The performance evaluations showed that the system’s indicators are good enough to harvest big-sized and heavy-weighted crops. Development of the unique and unified system, including a mobile platform, a manipulation system, an end-effector, and an integrated algorithm, completed the targeted harvesting process appropriately. The system can increase the speed and improve the harvesting process because it can work all day long, has a precise robotic manipulation and end-effector, and a programmable controlling system that can work autonomously.

The purpose of this study is to evaluate the performance of a robot combine harvester by comparing the Centimeter Level Augmentation Service (CLAS) and the Multi-Global Navigation Satellite System (GNSS) Advanced Demonstration tool for Orbit and Clock Analysis (MADOCA) from the Quasi-Zenith Satellite System (QZSS) by using the Real Time Kinematic (RTK) positioning technique as a reference. The first section of this study evaluates the availability and the precision under static conditions by measuring the activation time, the reconnection time, and obtaining a Twice Distance Root Mean Square (2DRMS) of 0.04 m and 0.10 m, a Circular Error Probability (CEP) of 0.03 m and 0.08 m, and a Root Mean Square Error (RMSE) of 0.57 m and 0.54 m for the CLAS and MADOCA, respectively. The second section evaluates the accuracy under dynamic conditions by using a GNSS navigation-based combine harvester running in an experimental field. The results show that the RMSE of the lateral deviation is between 0.04 m and 0.69 m for MADOCA and between 0.03 m and 0.31 m for CLAS; which suggest that the CLAS positioning augmentation system can be utilized for the robot combine harvester if the user considers these accuracy and dynamic characteristics.