Sinan Li

Dr. Sinan Li

School of Electrical and Information Engineering, University of Sydney, Camperdown, NSW 2006, Australia

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 March 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Sinan LiSinan Li
Sinan Li
STSiew Chong Tan
Siew Chong Tan
CLChi Kwan Lee
Chi Kwan Lee
EWEberhard Waffenschmidt
Eberhard Waffenschmidt
SHS. Y. Hui
S. Y. Hui
CTChi K. Tse
Chi K. Tse
Based on a survey on over 1400 commercial LED drivers and a literature review, a range of LED driver topologies are classified according to their applications, power ratings, performance and their energy storage and regulatory requirements. Both passive and active LED drivers are included in the review and their advantages and disadvantages are discussed. This paper also presents an overall view on the technical and cost aspects of the LED technology, which is useful to both researchers and engineers in the lighting industry. Some general guidelines for selecting driver topologies are included to aid design engineers to make appropriate choices.

1 October 2010 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
SHS. Y. Hui
S. Y. Hui
Sinan LiSinan Li
Sinan Li
XTXue Hui Tao
Xue Hui Tao
WCWu Chen
Wu Chen
WNW. M. Ng
W. M. Ng
This paper describes a patent-pending passive offline light-emitting diode (LED) driver that has no controlled semiconductor switches, electrolytic capacitors, auxiliary power supply, and control board. It can provide a fairly smooth current from the ac mains to drive LED strings. The new circuit has the advantages of high input power factor, high energy efficiency and luminous efficacy, long lifetime, stable luminous output, and high robustness against extreme weather conditions. In addition, over 90% of the driver material is recyclable, leading to reduction of electronic waste. It is particularly suitable public LED lighting systems, such as road lighting systems. Experimental results based on a 50-W system are included in the paper to confirm the validity of the proposal. Due to the circuit simplicity, an energy efficiency exceeding 93.6% has been achieved.

15 September 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
Existing methods of incorporating an active filter into an AC/DC converter for eliminating electrolytic capacitors usually require extra power switches. This inevitably leads to an increased system cost and degraded energy efficiency. In this paper, a concept of active-filter integration for single-phase AC/DC converters is reported. The resultant converters can provide simultaneous functions of power factor correction, DC voltage regulation, and active power decoupling for mitigating the low-frequency DC voltage ripple, without an electrolytic capacitor and extra power switch. To complement the operation, two closed-loop voltage-ripple-based reference generation methods are developed for controlling the energy storage components to achieve active power decoupling. Both simulation and experiment have confirmed the eligibility of the proposed concept and control methods in a 210-W rectification system comprising an H-bridge converter with a half-bridge active filter. Interestingly, the end converters (Type I and Type II) can be readily available using a conventional H-bridge converter with minor hardware modification. A stable DC output with merely 1.1% ripple is realized with two 50-μF film capacitors. For the same ripple performance, a 900-μF capacitor is required in conventional converters without an active filter. Moreover, it is found out that the active-filter integration concept might even improve the efficiency performance of the end converters as compared with the original AC/DC converter without integration.

29 March 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
Existing control schemes for single-phase ac-to-dc converters with active power-decoupling function typically involve a dedicated power-decoupling controller. Due to the highly coupled and nonlinear nature of the single-phase system, the design of the power-decoupling controller (typically based on the small-signal linear control techniques) is cumbersome, and the control structure is complicated. Additionally, with the existing power-decoupling control, it is hard to achieve satisfied dynamic responses and robust circuit operation. Following a recently proposed automatic-power-decoupling control scheme, this paper proposes a nonlinear control method that can achieve enhanced large-signal dynamic responses with strong disturbance rejection capability without the need for a dedicated power-decoupling controller. The proposed controller has a simple structure, of which the design is straightforward. The control method can be easily extended to other single-phase ac-to-dc systems with active power-decoupling function. Simulation and experimental results validate the feasibility of the proposed control method on a two-switch buck-boost PFC rectifier prototype.

25 September 2014 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Sinan LiSinan Li
Sinan Li
GZGuo-Rong Zhu
Guo-Rong Zhu
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
In a rectification system with unity power factor, the input power consists of a dc and a double-line frequency power component. Traditionally, an electrolytic capacitor (E-Cap) is used to buffer the double-line frequency power such that the dc output presents a small voltage ripple. The use of E-Cap significantly limits the lifetime of the rectifier system. In this paper, a differential ac/dc rectifier based on the use of an inductor-current waveform control methodology is proposed such that a single-stage direct ac/dc rectification without the need of an E-Cap for buffering the double-line frequency power, and a front-stage diode rectifier circuit can be achieved. The feasibility of the proposal has been practically confirmed in an experimental prototype.

1 April 2012 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Sinan LiSinan Li
Sinan Li
WZWenxing Zhong
Wenxing Zhong
WCWu Chen
Wu Chen
SHS. Y. R. Hui
S. Y. R. Hui
Traditional current-mirror methods require one fixed current reference for controlling other current source or sources. In this paper, a new self-configurable current-mirror method that can dynamically determine the best current branch as the current reference in order to ensure good balance of all parallel current sources is proposed. The operating principle involves a dynamic and self-configurable transistor-based current-balancing circuit that can be operated in saturation or linear mode. In either operating mode, good current balance or sharing among all parallel-connected current sources can be guaranteed. The novel current-balancing circuit does not require a separate power supply for powering their control circuits. The proposal is a modular one that can be expanded to any number of parallel current sources. Its principle has been successfully applied to current balancing of parallel LED strings.