Herein, cobalt–graphene–silica nanocomposites were prepared by a sol–gel method to produce heavy hydrocarbons for Fischer–Tropsch synthesis. The catalysts were characterized by N2 physisorption, XRD, TEM, TPR, TPD, XPS, and DRIFTS techniques. The activity of catalysts and the selectivity of products were examined in a tubular fixed-bed reactor. It can be concluded that the introduction of graphene into cobalt–silica nanocomposites significantly enhanced the amount and stability of adsorbed CO at low temperatures, resulting in higher concentrations of CO species on the catalyst surface. Moreover, graphene can weaken the cobalt–silica interaction, leading to higher degree of reduction of cobalt oxides and higher adsorption amounts of H2. In addition, the introduction of graphene led to the formation of cobalt with smaller particle sizes, which contributed to great enhancement of CO conversion. The selectivity to methane distinctly decreased to 4.2% from 8.1%, whereas the selectivity to C5+ products increased from 84.5% to 92.4%. The α value increased from 0.89 for the Co–Si catalyst to 0.94 for the Co–0.1GSi catalyst. In addition, with the increase in the graphene content, the fraction of heavy hydrocarbons (C19–29) for catalysts evidently increased to 36.0% from 28.3%, but the fraction of naphtha (C5–12) clearly reduced to 17.7% from 27.7%.
Fe–Zr–Na catalysts synthesized by coprecipitation and impregnation methods were implemented to investigate the promoting effects of Na and Zr on the iron-based catalyst for high-temperature Fischer–Tropsch synthesis (HTFT). The catalysts were characterized by Ar adsorption–desorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, CO temperature-programmed desorption, H2 temperature-programmed desorption, X-ray photoelectron spectroscopy, and Mössbauer spectroscopy (MES). The results indicated that Na changed the active sites on the catalyst surface for the CO and hydrogen adsorption, owing to the electron migration from Na to Fe atoms, which resulted in an enhanced CO dissociative adsorption and a decrease in hydrogen adsorption on the metallic Fe surface. The decreased H/C ratio on the catalyst surface accounted for the increased chain propagation and weakened hydrogenation of light olefins. Besides, Na could also facilitate the carbonization of catalysts and protect the iron carbide against oxidation, which provides more active sites for HTFT reaction and is beneficial to the C–C coupling. Zr could decrease the hematite crystallite size and stabilize the active phase to improve the HTFT activity. At an optimal Na loading of 1.0 wt %, the Fe–Zr–1.0Na catalyst exhibited the highest light olefin selectivity of 35.8% in the hydrocarbon distribution at a CO conversion of 95.2%.
24 July 2020 in Industrial & Engineering Chemistry Research