Jiaqi Chen

Dr. Jiaqi Chen

Department of Civil Engineering, Central South University, Changsha 410075, China
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2015 in Applied Thermal Engineering
Verified
Journal Article
Closed access
Jiaqi ChenJiaqi Chen
Jiaqi Chen
MZMiao Zhang
Miao Zhang
Hao WangHao Wang
Hao Wang
LLLiang Li
Liang Li

1 May 2018 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
Hancheng DanHancheng Dan
Hancheng Dan
ZZZhi Zhang
Zhi Zhang
Jiaqi ChenJiaqi Chen
Jiaqi Chen
Hao WangHao Wang
Hao Wang
A three-dimensional discrete element model of an asphalt mixture is developed based on discrete element method (DEM) software to investigate the cracking mechanism of the asphalt mixture, which is validated by the results of an indirect tensile test. Then, the model is applied to study the displacement field and fracture fragment distribution in terms of the micromechanical behavior. The results indicate that the failure process can be divided into three periods, namely, elastic growth of tensile stress, rapid expansion of the cracks, and crack coalescence. The fracture fragment initially forms near the loading bar and develops gradually until coalescence. Displacement circulation arises during the loading period, and the location depends largely on the crack development. Further, parameter-sensitive analysis revealed the effects of various loading speeds, different friction coefficients, and normal-to-shear stiffness ratios of the asphalt binder on the mechanical behavior of the asphalt mixture.

5 March 2021 in Coatings
Verified
Journal Article
Open access
PDF file
Jiaqi ChenJiaqi Chen
Jiaqi Chen
Hao WangHao Wang
Hao Wang
MSMilad Salemi
Milad Salemi
PBPerumalsamy N. Balaguru
Perumalsamy N. Balaguru
Carbon fiber reinforced polymer (CFRP) matrix composite overwrap repair systems have been introduced and accepted as an alternative repair system for steel pipeline. This paper aimed to evaluate the mechanical behavior of damaged steel pipeline with CFRP repair using finite element (FE) analysis. Two different repair strategies, namely wrap repair and patch repair, were considered. The mechanical responses of pipeline with the composite repair system under the maximum allowable operating pressure (MAOP) was analyzed using the validated FE models. The design parameters of the CFRP repair system were analyzed, including patch/wrap size and thickness, defect size, interface bonding, and the material properties of the infill material. The results show that both the stress in the pipe wall and CFRP could be reduced by using a thicker CFRP. With the increase in patch size in the hoop direction, the maximum von Mises stress in the pipe wall generally decreased as the maximum hoop stress in the CFRP increased. The reinforcement of the CFRP repair system could be enhanced by using infill material with a higher elastic modulus. The CFRP patch tended to cause higher interface shear stress than CFRP wrap, but the shear stress could be reduced by using a thicker CFRP. Compared with the fully bonded condition, the frictional interface causes a decrease in hoop stress in the CFRP but an increase in von Mises stress in the steel. The study results indicate the feasibility of composite repair for damaged steel pipeline.


18 February 2019 in Materials
Verified
Journal Article
Open access
PDF file
ZLZhuangzhuang Liu
Zhuangzhuang Liu
XHXiaonan Huang
Xiaonan Huang
Hao WangHao Wang
Hao Wang
Hao WangHao Wang
Hao Wang
Jiaqi ChenJiaqi Chen
Jiaqi Chen
CLCHENG LI
CHENG LI
The adhesion bonding between asphalt and aggregate significantly influences field performance and durability of asphalt pavement. Adhesion promoters are typically used to improve asphalt-aggregate bonding and minimize moisture-related pavement damage, such as cracking and raveling. This study evaluated the effectiveness of plant ash byproduct as adhesion promoter to improve asphalt-aggregate adhesion performance. Three commonly used aggregate types (granite, basic rock, and limestone) and two asphalt binder types were used in laboratory testing. A modified stripping test method was developed to evaluate test results with image analysis and measurement of asphalt film thickness. The contact angle test and scanning electron microscopy (SEM) with energy disperse spectroscopy (EDS) were conducted. Test results showed that plant ash lixivium significantly improved asphalt-aggregate adhesion. Among three aggregate types, granite yielded the worst asphalt-aggregate adhesion for both control and treated specimens. The effectiveness of adhesion promotion varied depending on the type of asphalt or aggregate and temperature. The SEM/EDS observations showed that the mesh-like crystalline was formed at the interface between asphalt binder and aggregate in the treated specimen, which was believed to enhance the interfacial bonding and prevent asphalt film peeling off from aggregate.

8 November 2017 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
Hancheng DanHancheng Dan
Hancheng Dan
JTJia-Wei Tan
Jia-Wei Tan
Jiaqi ChenJiaqi Chen
Jiaqi Chen
Asphalt bridge deck pavement subjected to high- and low-temperature environments is easily damaged (e.g. freezing in the winter and rutting in the summer). To prevent the freezing and rutting of asphaltic pavement, a groundwater circulation temperature control system (GCTCS) was designed for engineering applications. Using 3D simulations via COMSOL, feasibility levels were consolidated with the underground water to control the surface temperature of a bridge deck based on winter and summer conditions. Factors related to pipe spacing, flow velocities, the temperature of underground water, and the external environment were taken into consideration. Our simulation results show that the proposed GCTCS reliably prevents the freezing and rutting of asphalt deck pavement.