The characteristics of porosity and permeability in tight clastic rock reservoir have significant difference from those in conventional reservoir. The increased exploitation of tight gas and oil requests further understanding of fluid performance in the nanoscale pore-throat network of the tight reservoir. Typical tight sandstone and siltstone samples from Ordos Basin were investigated, and rate-controlled mercury injection capillary pressure (RMICP) and nuclear magnetic resonance (NMR) were employed in this paper, combined with helium porosity and air permeability data, to analyze the impact of pore-throat structure on the storage and seepage capacity of these tight oil reservoirs, revealing the control factors of economic petroleum production. The researches indicate that, in the tight clastic rock reservoir, largest throat is the key control on the permeability and potentially dominates the movable water saturation in the reservoir. The storage capacity of the reservoir consists of effective throat and pore space. Although it has a relatively steady and significant proportion that resulted from the throats, its variation is still dominated by the effective pores. A combination parameter (ε) that was established to be as an integrated characteristic of pore-throat structure shows effectively prediction of physical capability for hydrocarbon resource of the tight clastic rock reservoir.

The redeposition of pristine phosphorite plays an important role in phosphorus accumulation, which created reworked phosphorite extensively on the continental shelf. This paper, using geochemical analysis combined with data from petrology and diagenesis, focuses on the reconstruction of the formation processes of the Late Cretaceous Thaniyat phosphorite deposition in northwestern Saudi Arabia, which is a part of the famous large Neo-Tethys Ocean’s phosphorite deposit. The results of our study illustrate that the phosphorites represent the reworked products from the north, close to the edge of the Neo-Tethys Ocean’s shelf, where upwelling had accreted the pristine phosphorite. The reworked phosphatic grains were redeposited near the shore in sandstone, forming sandy phosphorite and on a carbonate platform and creating calcareous phosphorite. The microscale sedimentological and geochemical information hosted in the eroded phosphorite grains indicates that the source sediment, pristine phosphorite, occurred under a fluctuating geophysical condition and in a relatively limited geochemical environment. They were physically crushed and transported landward and deposited under oxic conditions, forming the Thaniyat phosphorites. Early diagenesis in the Thaniyat phosphorite was evidenced by recrystallization of the phosphate minerals, geochemical depletion, and C and O isotope excursion.

The Hailijin (HLJ) sandstone-type uranium deposit was newly discovered in the southwestern Songliao Basin in recent years. Different from the roll-front orebody of the sandstone-type uranium deposits with (phreatic oxidation) interlayer redox origin (or phreatic oxidation), the orebody of the HLJ uranium deposit is tabular-shaped and multi-stratiform. The kaolinite content in ore-controlling gray sandstones is significantly higher than that in oxidized sandstones, which have the highest kaolinite content in the less oxidized zone of sandstone-type uranium deposits in the basins of western China (such as Yili Basin and Turpan-Hami Basin). In order to identify the properties of ore-forming fluids and the genesis of the tabular-shaped orebody of the HLJ uranium deposit, trace element, scanning electron microscopy (SEM), X-ray diffraction (XRD), and uranium mineral electron probe (EPMA) analyses of different geochemical zone sandstones in ore-bearing strata were carried out. As a result, kaolinite, illite, and illite/smectite formation (I/S) appear to alternate with one another in ore-controlling gray sandstones, and the content of kaolinite is the highest in ores. SEM analysis also suggests that uranium minerals are commonly adsorbed on the surface of foliated and vermicular kaolinite or trapped within micropores of kaolinite. In this case, it is inferred that kaolinite in ore-controlling gray sandstones is of epigenetic origin, and the ore-bearing sandstones have undergone at least one transformation of acidic fluids. Combined with the regional paleoclimate, regional tectonics, and regional burial history, it is concluded that the acidic fluid originated from the uranium-rich source rocks of the Lower Cretaceous Jiufotang Formation, and the tabular-shaped orebody of the HLJ uranium deposit was formed by exudative metallogeny. When the uranium-rich acidic organic fluids exuded upward from deep levels along the faults to the target strata, the solubility of uranium and other polymetallic elements decreased because of the decrease in temperature and pressure, and uranium eventually precipitated and accumulated in sandstones with suitable permeability and porosity. However, it cannot be ruled out that the superimposition and transformation of uranium mineralization was caused by phreatic oxidation or local interlayer redox during the interval of exudative metallogeny.

With the exploration of tight oil and gas, shallow-water deltaic reservoirs have been attracting more and more attention. The sedimentary architecture of a shallow-water delta shows distinctive differences with that of a deep-slope delta. These differences may be associated with the mechanism and characteristics of the deposition in the area where the sediments unloaded. Based on modern sedimentary research of the Poyang Lake in China, this paper focuses on the processes of river flow entering a lake with a low dip angle. We conducted six sets of numerical simulations with different initial sedimentary flow velocities using Fluent software for analyzing the hydrodynamics and the sediment transportation in the shallow-water delta. We combined the simulation results with an analysis of the geomorphology of the Gangjiang Delta to reveal the deposition along the shoreline of the lacustrine shallow-water delta. The numerical simulation shows that the shallow-water delta is dominated by bed friction with an extensive hydrodynamical boundary layer. The bed shear stress, which varies with the changes in river flux, dominated the sediment transport and deposition at the shallow-water delta front, where the effluent flow mixes with lake water. The distributary channels show characteristics of repeatedly occurred erosion, scouring, filling, and reoccupation. We argue that the depositional characteristics are associated with the changes in bed shear stress controlled by variation of flow velocity. Mouth bars are less likely to grow to a reasonable scale because of the seasonal scouring of extreme floods. Moreover, the lake flow potentially reworks the mouth bars. Consequently, mouth bar deposits were difficult to preserve as hydrocarbon reservoirs in ancient shallow-water delta.