Division of Textiles and Clothing, Department of Biological and Agricultural Engineering, University of California at Davis, 1 Shields Ave., Davis, CA 95616, USA
Dr. Ning Pan
Division of Textiles and Clothing, Department of Biological and Agricultural Engineering, University of California at Davis, 1 Shields Ave., Davis, CA 95616, USA
Shape memory polymers (SMPs) are an exciting class of stimuli-responsive smart materials that demonstrate reactive and reversible changes in mechanical property, usually by switching between different states due to external stimuli. We report on the development of a polyurethane-based SMP foam for effective pressure redistribution that demonstrates controllable changes in dynamic pressure redistribution capability at a low transition temperature (∼24 °C)—ideally suited to matching modulations in body contact pressure for dynamic pressure relief (e.g., for alleviation or pressure ulcer effects). The resultant SMP material has been extensively characterized by a series of tests including stress–strain testing, compression testing, dynamic mechanical analysis, optical microscopy, UV–visible absorbance spectroscopy, variable-temperature areal pressure distribution, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, differential scanning calorimetry, dynamic thermogravimetric analysis, and 1H nuclear magnetic resonance spectroscopy. The foam system exhibits high responsivity when tested for plantar pressure modulation with significant potential in pressure ulcers treatment. Efficient pressure redistribution (∼80% reduction in interface pressure), high stress response (∼30% applied stress is stored in fixity and released on recovery), and excellent deformation recovery (∼100%) are demonstrated in addition to significant cycling ability without performance loss. By providing highly effective pressure redistribution and modulation when in contact with the body’s surface, this SMP foam offers novel mechanisms for alleviating the risk of pressure ulcers.
The importance of developing high-performance electrode materials with low cost for supercapacitors is self-evident. In this paper, composites of KOH activated carbon/graphene nanosheets were prepared via a simple hydrothermal treatment of graphite oxide and KOH activated carbon. The electrochemical experiments that were conducted demonstrate that these composites exhibited synergistically improved electrochemical performance as electrodes in a supercapacitor. The specific capacitance of these composites can reach as high as 205 and 173 F g−1 in 6 M KOH aqueous solution and 1 M TEABF4 in acetonitrile solution, respectively. In addition, the as fabricated electrodes that were obtained using these composites show a reduced internal resistance and higher capacitance retention performance. Furthermore, the entire preparation process is simple, low cost and easily scalable to mass production, leading to great potential application in supercapacitors for as prepared composites.
1 March 2019 in International Journal of Heat and Mass Transfer