Lignocellulosic materials are a potentially valuable source of both aromatic compoundsvia the lignin component and sugars from the cellulose and hemicellulose components. However, efficient means of separating and depolymerising the components are required. An ionic liquid mixture containing the 1-ethyl-3-methylimidazolium cation and a mixture of alkylbenzenesulfonates with xylenesulfonate as the main anion was used to extract lignin from sugarcane plant waste at atmospheric pressure and elevated temperatures (170–190 °C). The lignin was recovered from the ionic liquid by precipitation, allowing the ionic liquid to be recycled. An extraction yield exceeding 93% was attained. The lignin produced had a molecular weight of 2220 g/mol after acetylation. The regenerated ionic liquid showed good retention of structure and properties. The other product of the extraction was a cellulose pulp, which can be used in further processing.
Keratin from various livestock industries is currently a waste material that has potential as a source of polyamide polymers that could replace fossil fuel derived materials if processing methods can be developed. In this work we have investigated methods for the dissolution and regeneration of keratin. Dissolution of keratin (from turkey feather) in ionic liquids was conducted under nitrogen at 130 °C for 10 hours. It was found that [BMIM]Cl, [AMIM]Cl and [choline][thioglycolate] could dissolve turkey feather keratin without addition of solvent or other chemicals. A significant percentage of solubility was obtained, up to 45% by weight. A water insoluble fraction was recovered by addition of water to the solution (∼50%). The structure and properties of this regenerated, water insoluble fraction were investigated. Compared to the starting material, the regenerated keratin shows structural changes rather than chemical changes within the polypeptide chains. The remaining fraction, consisting of water soluble fragments, was characterised by gel electrophoresis.
Wool keratin, a natural biopolymer, is potentially an important renewable source of raw materials for the polyamide plastics industry. Large quantities of non-spinnable and short fibers of wool are discarded globally and hence are available as low value waste materials. In this study, we have investigated different solvents, including ionic liquids and deep eutectic mixtures, for the dissolution and processing of wool. The results show that substantial dissolution of wool (up to 475 mg wool per gram of solvent) can be obtained in the 1-allyl-3-methylimidazolium dicyanamide [AMIM][dca] ionic liquid at 130 °C. Our studies also indicated enhanced dissolution (an additional 50–100 mg g−1) of wool upon the addition of a reducing agent to the ionic liquids. Water insoluble fractions (20–40%) were obtained on the addition of water to the dissolved wool. This regenerated fraction was characterized for structural and chemical changes and found to contain a larger fraction of β-sheets and random coils than the starting material. The water soluble fraction was characterised and the results indicated the presence of fragments of low molecular weight polypeptide chains.
1 December 1999 in Journal of Applied Electrochemistry