The energy production processes from fossil fuels represent the first anthropogenic source of mercury emissions in Europe and the second in the world. Among the different possibilities that can be posed to reduce these emissions, this work focuses on the use of regenerable sorbents based on gold nanoparticles dispersed on activated carbon foam. The use of regenerable sorbents would not only allow the objective of reducing mercury emissions, but also avoiding the generation of new toxic wastes. The results showed a retention efficiency of 100% and a retention capacity close to 600 µg·g−1 over several cycles of regeneration. Moreover, acid gases did not poison the support. It was observed that mercury capture in this simulated oxy-combustion atmosphere was a consequence of two mechanisms: (1) the amalgamation of elemental mercury and elemental gold and (2) the oxidation of elemental mercury in the presence of HCl, with the subsequent retention of the oxidized mercury on the surface of the activated carbon foam. The nanodispersion of gold on such supports involves a high initial investment. However, this would be counterbalanced by the remarkable regeneration capacity of the sorbent and the possibility of recovering all the materials used.
Selenium pollution in water is a worldwide issue. Se(IV) and Se(VI) are mainly found in contaminated water due to their high solubility and mobility; their presence poses a serious risk as they can severely harm human health. Although iron oxide and hydroxide nanoparticles can be efficient candidates for the removal of selenium oxyanions due to their high adsorption capacity, the role of each iron species has not been fully elucidated. Furthermore, iron species are often found to be less effective for Se(VI) than Se(IV). The challenge and novelty of this study was to develop a carbon material impregnated with different iron phases, including oxides (magnetite/hematite) and hydroxides (goethite/lepidocrocite) capable of removing both Se(IV) and Se(VI). Since the phase and morphology of the iron nanoparticles play a significant role in Se adsorption, the study evaluated both characteristics by modifying the impregnation method, which is based on an oxidative hydrolysis with FeSO4 7H2O and CH3COONa, and the type of carbonaceous support (activated carbon or sucrose-based carbon foam). Impregnated activated carbons provide better removal efficiencies (70–80%) than carbon foams (<40%), due to their high surface areas and point zero charges. These results show that the adsorption of Se(VI) is more favorable on magnetic oxides (78%) and hydroxides (71%) than in hematite (<40%). In addition, the activated carbon decorated with magnetite showed a high adsorption capacity for both selenium species, even in alkaline conditions, when the sorbent surface is negatively charged. A mechanism based on the adsorption of inner-sphere complexes was suggested for Se(IV) immobilization, whereas Se(VI) removal occurred through the formation of outer-sphere complexes and redox processes.
18 February 2002 in Journal of Chemical Technology & Biotechnology
This work focuses on carbon foams, whose peculiarity is a predominant open macroporous cellular network that can be provided with tailored texture and morphology by the modification of the preparation process. The goal was to obtain macroporous carbonaceous structures capable of being activated by following a simple thermo-foaming procedure using a few reagents. With this purpose in mind, carbon foams with different textural properties were synthesized from sucrose using two foaming processes: at atmospheric pressure and in a pressurized reactor. Iron and silver nitrates added to sucrose gave rise, after carbonization, to materials with iron oxides and elemental silver particles nano-dispersed in the carbon matrix and promoted microporosity in both cases and mesoporosity in the case of iron nitrate. Iron nitrate also catalyzes the graphitization of the carbon material during carbonization. All these findings show the potential of sucrose thermo-foaming process as a viable and sustainable path to produce versatile carbon materials, capable of being used in various applications.