We report the first demonstration of potassium ion cointercalation into graphitic carbon electrodes including both natural graphite and multi-layered graphene in both diglyme and monoglyme based electrolytes. Contrary to conventional desolvation-based intercalation of potassium, we demonstrate excellent capacity retention of ∼80% at rates up to 10 A g−1 (30 second charge), with 95% capacity retention over 1000 cycles, and up to 100 mA h g−1 capacity. Raman and X-ray diffraction following 1000 cycles demonstrates no signature of defects, damage, or change to graphitic crystallinity compared to uncycled pristine materials that is attributed to weak ion–lattice interactions due to the solvated guest K ions. In situ Raman spectroscopy highlights the sequential formation of a stage 4, 3, 2, and 1 graphite intercalation compound (GIC) that occurs without the signature of dilute staging. In a charged stage 1 compound, we observe lattice expansion from 0.335 nm to 1.16 nm and measure the work function to be ∼3.4 eV. Overall, this system overcomes rate and durability bottlenecks that limit current K-ion battery electrodes, and gives promise to cointercalation for durable, fast, and low-cost storage systems.
Here we report a room-temperature sodium metal battery, where the sodium initially stored in a Na3V2(PO4)3 cathode is plated, upon charging, onto an aluminum current collector coated with a thin nucleation layer. To maximize the battery performance, conventional sodium-ion anode materials, including non-graphitized carbons and sodium-alloying metals, were evaluated as nucleation layers to facilitate stable electroplating of sodium metal. Among several materials studied, carbon black and bismuth showed the highest sodium plating–stripping coulombic efficiencies in half-cell testing, averaging 99.9% and 99.85%, respectively, over 50 cycles at 0.5 mA cm−2. Building on these findings, anode-free cells with Na3V2(PO4)3 cathodes were assembled in a discharged state, demonstrating energy densities up to 318 W h kg−1 at 0.25 mA cm−2 (∼C/6), a first-cycle coulombic efficiency up to 92%, a stable discharge voltage at 3.35 V, an average round-trip energy efficiency of 98%, and a capacity retention of 82.5% after 100 cycles at 0.5 mA cm−2 (∼C/3). With its unique performance highlighted in this work, the anode-free sodium battery emerges as a low-cost, high-performance option for stationary electric storage.
14 February 2017 in ACS Applied Materials & Interfaces