Nowadays natural fibre composites have gained great significance as reinforcements in polymer matrix composites. Composite material based on a polymer matrix reinforced with natural fibres is extensively used in industry due to their biodegradability, recyclability, low density and high specific properties. A study has been carried out here to investigate the fibre volume fraction effect of hemp fibre woven fabrics/PolyPropylene (PP) composite laminates on the tensile properties and impact hammer impact test. Initially, composite sheets were fabricated by the thermal-compression process with desired number of fabric layers to obtain composite laminates with different fibre volume fraction. Uniaxial, shear and biaxial tensile tests were performed and mechanical properties were calculated. Impact hammer test was also carried out to estimate the frequency and damping parameters of stratified composite plates. Scanning Electron Microscope (SEM) analysis was performed to observe the matrix and fibre constituent defects. Hemp fabrics/PP composite laminates exhibits viscoelastic behaviour and as the fibre volume fraction increases, the viscoelastic behaviour decreases to elastic behaviour. Due to this, the tensile strength increases as the fibre content increases. On the other hand, the natural frequency increases and damping ratio decrease as the fibre volume fraction increases.
We report on the dynamical buckling of a spherical shell (a table-tennis ball) impinging in normal incidence on a rigid surface (a glass plate). Experimentally, we observe and decipher the geometrical characteristics of the shell profile in the contact region along with global metrics such as the contact duration and the coefficient of restitution of the linear velocity. We determine, in particular, the onset of the ball buckling instability. We find that, just like in quasi-statics, the shell buckles when the crushing exceeds about twice the thickness of the shell. In addition, for launching conditions resulting in the ball elastic buckling, a drop in the restitution coefficient is observed. A companion numerical finite elements study is set to monitor the different sources of energy and reveals that the added energy loss is mainly due to the friction between the shell surface and the solid substrate.
Natural fiber composites are widely used in a several industrial applications due to their outstanding biodegradability and recyclability. Thermal compression molding is a rapid and easy method to fabricate composite sheets. To better understand the manufacturing process and evaluate the mechanical properties of hemp woven fabrics reinforced thermoplastic composite at elevated temperatures, a detailed investigation is required. In this study, composite sheets were initially fabricated using hemp fiber fabrics (taffeta and serge 2×1) and polypropylene sheets by the thermal compression molding process. Mechanical tests (uniaxial, shear, and biaxial) were carried out at temperatures ranging from 20 to 160 C in order to estimate the mechanical properties of composite sheets. Non-linear behavior was observed during the loading due to the unbalanced weaving pattern of hemp fabric. The biaxial behavior of the composite was estimated using a theoretical method for fabric strength prediction taking into account the interaction effect between the yarns. The experimental results demonstrate that, at high temperature, the polymer softens and the fiber reinforcements dismantle which resulting in a decrease in the mechanical properties of the composite. Two analytical models (Ha & Springer and thermal expansion coefficient) were also proposed to estimate the thermo-mechanical properties of natural fiber composites subjected to various temperatures.
1 January 2018 in Advances in Materials Science and Engineering
As a part of the DECID2 French National Project (2008–2012), construction of a large platform entirely made of smart composites was carried out and two demonstrators were installed. During a previous study, an ABAQUS model of smart composite platform was set up to perform numerical simulations that predict the mechanical behaviour of bolt‐fastened platform under static three‐point bending load, and a stress concentration is observed around the bolt holes. Unidirectional composites are subjected to delamination at very low stress, and this cannot be tolerated because most of the applications of pultruded structures are in civil engineering, which involves human safety. Therefore, it is essential to study the correlation of delamination onset and find a technology to enhance delamination strength. In this study, a numerical analysis was carried out to enhance the delamination strength around the bolt holes. Bidirectional fiberglass cloths were wrapped around unidirectional pultruded beams to reinforce the structure and to prevent delamination. Due to the high cost of these cloths, a study was also carried out to select an appropriate cloth material by taking into account two aspects: density and number of layers of cloths. The selected cloth was compared with conventional continuous fibreglass mat, and it was found that bidirectional fibreglass cloth material performs well in preventing delamination, even though it is expensive.