Different petroleum operations produce huge amount of oil sludge annually. For instance, US EPA estimates the annual sludge production of each US refinery of 30,000 tons, while the average oily sludge produced from petrochemical industries in China is estimated about 3 million tons per year. In the last year, our center could recover about 30,206 barrels of raw oil from 32,786 barrels of tank bottom sludge (TBS) for different petroleum companies. This sludge causes huge economic losses besides its negative environmental impacts. The accumulation of sludge in the tanks results in reducing the tanks’ capacity for storing liquid crude, accelerating the corrosion of the tanks, delay in the production schedule, and disturbing the whole production operation. There are diverse treatment methodologies such as solvent treatment, addition of certain chemicals, and centrifuging. Of course, the environmental regulations and the overall cost limitations are very important in deciding the preferred applicable method(s). Although several works handled the problem of sludge deposition and treatment from different aspects, we intend to introduce a different work. First, composition, formation, types, and properties of TBS were reviewed. Then, environmental and economic problems caused by TBS were revised. At last, different methodologies applied for treatment of oily TBS to recover oil and safe disposal of hazardous remains were investigated focusing on the most straightforward and environmentally friendly protocols. It is expected that this review attracts the experts in petroleum chemistry, and other relevant fields and provides a comprehensive understanding of current sludge control and treatment research. Graphical abstract
Modified uncrosslinked and crosslinked chitosan derivatives were investigated as green sorbents for the removal of copper (Cu2+) and lead (Pb2+) cations from simulated solutions. In this regard, N, O carboxymethyl chitosan (N, O CMC), chitosan beads (Cs-g-GA), chitosan crosslinked with glutaraldehyde/methylene bisacrylamide (Cs/GA/MBA), and chitosan crosslinked with GA/epichlorohydrin (Cs/GA/ECH) were prepared and characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy analyses. Atomic force microscopy investigation was carried out to compare the surface topography of the prepared samples before and after the metal uptake. The kinetics of the removal process were investigated by pseudo-first-order and -second-order models. Moreover, the adsorption isotherms were carefully studied by applying Langmuir and Freundlich models. The data reveal that upon adsorption of copper(II) metal ions, all chitosan-modified products followed the Langmuir isotherm except for Cs/GA/ECH which followed the Freundlich isotherms, and the highest adsorption capacity (qe) was obtained for Cs/GA/MBA due to the formation of stable chelate structures between the metal cation and the functional groups present on the modified chitosan product. The order of metal uptake at the optimum pH value is as follows: Cs/GA/MBA (Cu: 95.7 mg/g, Pb: 99.15 mg/g), Cs/GA/ECH (Cu: 80.4 mg/g, Pb: 93.14 mg/g), Cs-g-GA (Cu: 77 mg/g, Pb: 88.4 mg/g), and N, O CMCh (Cu: 30.2 mg/g, Pb: 44.8 mg/g). The AFM data confirmed the metal uptake process by comparing the roughness and height measurements of the free sorbents and the metal-loaded sorbents.
Heavy metal ions are discharged into water from several industries. They are carcinogenic and they cause severe environmental hazards. In the present work the ability of removal of copper and lead from aqueous solutions has been studied using carboxy methyl β cyclodextrin, poly(ethylene glycol) β cyclodextrin and their magnetic counterparts. Effects of pH, concentration of the metal ion, temperature and contact time have been studied. Equilibrium isotherms for the adsorption of the metals were measured experimentally. Results were analysed at different temperatures and the characteristic parameters for each adsorption isotherm were determined. The adsorption process has been found exothermic in nature and thermodynamic parameters, Gibb’s free energy (ΔG), change in enthalpy (ΔH) and change in entropy (ΔS) have been calculated. The paper also includes results on the kinetic measurements of adsorption of the metal on modified β cyclodextrin and their magnetic nano composites at different temperatures. It was found that poly (ethylene glycol) β cyclodextrin showed better performance than carboxy methyl β cyclodextrin
1 August 2011 in Journal of Petroleum Science and Engineering
In the current study, the performance of superabsorbent hydrogel composites comprised of Guar gum-Pectin/Polyacrylamide/ZnO crosslinked with gamma irradiation (10 kGy) has been investigated for sustainable agriculture. The claimed composites (GG/PC/PAAm/ZnOx) were characterized by FTIR, TGA, and AFM. The swelling capacity data reveal that the equilibrium water swelling (EW) of the composites was increased by increasing the ZnO content from 600 to 1050 g/g for zero to the highest concentration of ZnO, respectively. Furthermore, the physical properties of the soil mixed with the hydrogels were improved; water holding capacity (WHC) increased to 66% and water retention (WR) kept at 15% after 20 days. The composites showed a good degradability in the biodegradation test. They also portrayed super-absorption capacity at three swelling/deswelling cycles. This advancement is important for reducing water consumption through the irrigation of arid lands. The prepared composites were proved as excellent candidates in sustainable agriculture applications.