Graphene-based materials in the form of fibres, fabrics, films, and composite materials are the most widely investigated research domains because of their remarkable physicochemical and thermomechanical properties. In this era of scientific advancement, graphene has built the foundation of a new horizon of possibilities and received tremendous research focus in several application areas such as aerospace, energy, transportation, healthcare, agriculture, wastewater management, and wearable technology. Although graphene has been found to provide exceptional results in every application field, a massive proportion of research is still underway to configure required parameters to ensure the best possible outcomes from graphene-based materials. Until now, several review articles have been published to summarise the excellence of graphene and its derivatives, which focused mainly on a single application area of graphene. However, no single review is found to comprehensively study most used fabrication processes of graphene-based materials including their diversified and potential application areas. To address this genuine gap and ensure wider support for the upcoming research and investigations of this excellent material, this review aims to provide a snapshot of most used fabrication methods of graphene-based materials in the form of pure and composite fibres, graphene-based composite materials conjugated with polymers, and fibres. This study also provides a clear perspective of large-scale production feasibility and application areas of graphene-based materials in all forms.
Nowadays, the polyurethane and its derivatives are highly applied as a surface modification material onto the textile substrates in different forms to enhance the functional properties of the textile materials. The primary purpose of this study is to develop prediction models to model the absorption property of the textile substrate using the Adaptive Neuro-Fuzzy Inference System (ANFIS) and Artificial Neural Network (ANN) methods. In this study, polyurethane (PU) along with acrylic binder was applied on the dyed polyester knitted fabric to develop and validate the prediction models. Through the morphological study, it was evident that the solution prepared with the polyurethane and the acrylic binder was effectively coated onto the fabric surface. The ANFIS model was constructed by considering binder (ml) and PU (%) as input parameters, whereas absorbency (%) was the only output parameter. On the other hand, the system was trained with 70% data for constructing the ANN model whereas testing and validation were done with 15% data, respectively. To train the network, feed-forward backpropagation with Levenberg–Marquardt learning algorithm was used. The coefficient of determination (R2) was found to be 0.98 and 0.93 for ANFIS and ANN model, respectively. Both prediction models exhibited an excellent mean absolute error percentage (0.76% for the ANFIS model and 1.18% for the ANN model). Furthermore, an outstanding root-mean-square error (RMSE) of 0.61% and 1.28% for ANFIS and ANN models was observed. These results suggested an excellent performance of the developed models to predict the absorption property of the polyurethane and acrylic binder treated fabric. Besides, these models can be taken as a basis to develop prediction models for specific types of functional applications of the textile materials to eliminate heaps of trial and error efforts of the textile industries, which eventually be helpful in the scalable production of functional textiles.
This research aims to develop a fuzzy logic-based model for predicting the warp way and weft way Tearing Strength (TS) of laser engraved denim garments concerning two of the most important laser parameters such as Dots Per Inch (DPI) and Pixel Time (PT). Laser engraving is a widely used approach in garment washing factories because of its lower health hazards, time efficiency, and accuracy than other processes. However, controlling the laser parameters is very important, as if the tearing strength of the treated garments falls lower than the tolerable limit, the garment might be rejected. In this study, the fuzzy logic-based method is used to develop a prediction model to determine the Tearing Strength of the laser engraved denim. The model exhibits the exact same trend for TS as the experimental findings, i.e., TS increases with the decrement of either DPI, PT, or both. Moreover, the Mean Relative Errors (%) for warp and weft way Tearing Strength was found to be 3.34 and 3.53, respectively, which are within the acceptable limits. The coefficient of determination (R2) was found 0.98 (R = 0.99) for both the warp and weft way Tearing Strength, and the result suggested that up to 98% of total changes in warp and weft way Tearing Strength can be explained by the model. From the results, it can be evident that the principle of the proposed model can satisfactorily be used in predicting the Tearing Strength of the laser engraved denim garments, which will be beneficial for the garment washing industry by eliminating a lot of existing trial and error approach to set process parameters and thus can play an important role in increasing the productivity by process optimization.
1 January 2014 in IOSR Journal of Polymer and Textile Engineering
The authors have fabricated a nonvolatile flash-memory device using SiGe nanocrystal floating gate with new variable oxide thickness (VARIOT) tunnel barrier. It is found that the writing speed of VARIOT sample is almost hundred times faster at a low programming voltage of 5-8 V compared to the traditional flash memory with single-layer tunnel barrier. The results have shown that a long-charge retention time of up to 106 s and a good endurance characteristics of up to 106 write/erase cycles can be achieved at 85 degC
1 January 2021 in Journal of Engineered Fibers and Fabrics
The main purpose of this study is to predict and develop a model for forecasting the Seam Strength (SS) of denim garments with respect to the thread linear density (tex) and Stitches Per Inch (SPI) by using a Fuzzy Logic Expert System (FLES). The seam strength is an important factor for the serviceability of any garments. As seams bound the fabric pieces together in a garment, the seams must have sufficient strength to execute this property even in the unexpected severe conditions where the garments are subjected to loads or any additional internal or external forces. Sewing thread linear density and number of stitches in a unit length of the seam are the two of the most important factors that affect the seam strength of any garments. But the relationship among these two specific variables and the seam strength is complex and non-linear. As a result, a fuzzy logic based model has been developed to demonstrate the relationship among these parameters and the developed model has been validated by the experimental trial. The coefficient of determination ( R2) was found to be 0.98. The mean relative error also lies withing acceptable limit. The results have suggested a very good performance of the model in the case of the prediction of the seam strength of the denim garments.