This research aims to develop a fuzzy logic-based model for predicting the warp way and weft way Tearing Strength (TS) of laser engraved denim garments concerning two of the most important laser parameters such as Dots Per Inch (DPI) and Pixel Time (PT). Laser engraving is a widely used approach in garment washing factories because of its lower health hazards, time efficiency, and accuracy than other processes. However, controlling the laser parameters is very important, as if the tearing strength of the treated garments falls lower than the tolerable limit, the garment might be rejected. In this study, the fuzzy logic-based method is used to develop a prediction model to determine the Tearing Strength of the laser engraved denim. The model exhibits the exact same trend for TS as the experimental findings, i.e., TS increases with the decrement of either DPI, PT, or both. Moreover, the Mean Relative Errors (%) for warp and weft way Tearing Strength was found to be 3.34 and 3.53, respectively, which are within the acceptable limits. The coefficient of determination (R2) was found 0.98 (R = 0.99) for both the warp and weft way Tearing Strength, and the result suggested that up to 98% of total changes in warp and weft way Tearing Strength can be explained by the model. From the results, it can be evident that the principle of the proposed model can satisfactorily be used in predicting the Tearing Strength of the laser engraved denim garments, which will be beneficial for the garment washing industry by eliminating a lot of existing trial and error approach to set process parameters and thus can play an important role in increasing the productivity by process optimization.
1 January 2014 in IOSR Journal of Polymer and Textile Engineering
The present research compares a machine learning model with a statistical model, with specific emphasis on artificial neural networks and multiple linear regression models. The aim of this study is to forecast the thermal transmittance of a plain-woven cotton fabric using input data such as thread density measured in ends per inch, picks per inch, and fabric thickness. The artificial neural network is built using a network with feed-forward backpropagation, and the MATLAB software’s training function trainlm is used to modify its weight and basic values based on Levenberg–Marquardt optimization techniques. The sigmoid transfer function is used to set the layer output and measure network performance in terms of the root mean squared error, mean absolute error percentage, and coefficient of determination which were determined. For the artificial neural network prediction model, the root mean squared error and mean absolute error percentage were 1.05 and 3.132%, respectively, while the coefficient of determination was 0.9307. In contrast, the multiple linear regression prediction model had root mean squared error and mean absolute error percentage values of 2.98 and 8.97%, respectively, along with a coefficient of determination of 0.4727. The results reveal that the artificial neural network model outperforms the multiple linear regression model, showing superior accuracy and robustness in capturing the intricate interactions between important fabric parameters (ends per inch, picks per inch, and thickness) and thermal transmittance values. This research emphasizes the efficiency of artificial neural network modeling as a superior tool for forecasting thermal transmittance in textile applications rather than employing the time-consuming trial-and-error process for delivering significant insights for material engineering and energy-efficient design.
30 May 2015 in International Journal of Science, Technology and Society
In this modern world, fashion & styles are changing frequently. The emergence of fast changes in fashion has given rise to shorten production cycle time in the garment industry. To meet the dynamic customer demands of momentous quantities in shorten lead time, assembly line production systems are used, where the garment components are assembled into a finished garment through a sub-assembly process. So in the era of product customization, the optimal usage of resources especially the available facilities & operators who are adding the value of product is important. Therefore the assembly line has to be planned in much more flexible way. This paper deals with the maximum utilization of manpower in labor intensive assembly lines. The objective is to accurately delegate workers to the various operations required to complete the product based on their skill & experience so as to achieve the highest level of productivity and delivery as per planned target. The experimental result showed meaningful improvement in productivity as compared to the existing system.
22 November 2024 in Results in Control and Optimization