Analytical solutions for displacement, strain, and stress in a single energy pile provide rational, mechanics-based qualitative and quantitative understanding of thermomechanical load transfer mechanism in energy piles. To this end, thermomechanically induced axial displacement, strain, and stress evolutions are derived for different tip restraints and for several different loading scenarios including net heating, net cooling, and compressive and tensile mechanical loads. In addition, the analytical solutions are successfully validated against centrifuge test results. The analytical solution for the location of a thermal null point indicates that it depends on the geometry and stiffness of the pile, stiffness of the soil, and amount of head and tip restraints. In addition, the thermal null point moves upward into the top half of the pile with increase in the ratio between the amounts of head and tip restraints. It is also found that formation of a tension zone in energy piles is likely for several different load scenarios. At a constant mechanical load, the length of a tension zone depends on the geometry of the pile, ratio of the soil and pile stiffness, and the magnitude of thermal load. An increased magnitude of a net cooling combined with a constant compressive axial force increases the length of a tension zone and magnitude of tensile stress in the pile. On the contrary, the length of a tension zone and magnitude of tensile stress decrease with the increase in magnitude of heating at a constant tensile axial force. In summary, the analytical solutions and their features presented herein provide a fundamental, rational, mechanics-based framework for advancing the understanding of a load transfer mechanism and soil structure interaction in energy piles, thus contributing directly toward their safer design and wider use, and increased sustainability of civil engineering infrastructure.
This study investigates the response of pre-stressed anchored excavation walls under dynamic and pseudo-static loadings. A finite difference numerical model was developed using FLAC2D, and the results were successfully validated against full-scale experimental data. Analyses were performed on 10, and 20-m-height stabilized excavated slopes with 60° to 90° of inclination angle with the horizon to represent an applicable variety of wall geometries. In dynamic analysis, the statically stabilized models were subjected to 0.2 to 0.6g of the dynamic peak acceleration to evaluate the effect of ground acceleration on their performance. Furthermore, pseudo-static analyses were performed on the statically stabilized models with pseudo-static coefficients ranging from 0.06 to 0.22. The results revealed that ground anchored slopes generally showed acceptable performances under dynamic loading, while higher axial forces were induced to ground anchors in higher and steeper models. Furthermore, comparing the results of dynamic and pseudo-static analyses showed a good agreement between the two methods' predictions in the mobilized axial force along the ground anchors. Pseudo-static coefficients were then proposed to replicate dynamic results, considering the slope geometry and dynamic load peak acceleration. The results revealed that higher and steeper stabilized slopes required higher values of pseudo-static coefficients to match the dynamic predictions successfully. The results indicate that pseudo-static coefficient tend to increase with the increase in dynamic load peak acceleration in any given model. Doi: 10.28991/cej-2021-03091703 Full Text: PDF
1 October 2022 in Journal of Geotechnical and Geoenvironmental Engineering
Analytical solutions for axial displacement, strain, and stress in a single semifloating energy pile embedded in a layered soil profile subjected to thermal and mechanical loads were derived. An analytical solution for the location of zero displacement, also known as a null point, was derived for a pile subjected to thermal load. It was shown that the location of the thermal null point corresponds to the location of the maximum magnitude of thermal axial stress. It also was shown that the location of the null point moves toward the pile tip as the stiffness of the bedrock below the pile tip increases. The analytical solutions were validated against in situ full-scale energy pile tests. The solutions along with the validation process delineated the load transfer mechanism in energy piles subjected to thermal, mechanical and combined thermomechanical loads embedded in a four-layer soil profile. Flowcharts delineating the procedures for obtaining the analytical solutions for a single energy pile embedded in an arbitrary number of layers, and subjected to thermal and mechanical loads are provided. Although the continuity of stresses and displacements at the interface of different soil layers is maintained, displacement, strain, and stress diagrams exhibit a lack of smoothness, the amount of which depends on the difference in the stiffness of these layers. In summary, the presented solutions provide a rational, mechanics-based framework for advancing the understanding of thermomechanical response of energy piles that not only is essential for analysis and design, but ultimately contributes to a wider use of energy piles and increased sustainability of civil engineering infrastructure.
1 December 2023 in International Journal of Geomechanics
This study resulted from the need for better consideration of subgrade and unbound layers on the performance of flexible pavements in Kansas. Thus, the main objective was to develop pavement performance prediction models with emphasis on the effects of subgrade and unbound layers. To this end, pavement distress data, which were collected over several years across the state of Kansas, including rutting, fatigue cracking, transverse cracking, roughness and core analysis, served as the input data into statistical models. The effects of subgrade and unbound layers were represented by the corresponding results of dynamic cone penetrometer (DCP) tests and thickness of the unbound layer. In addition, traffic volume was represented by average annual daily truck traffic (AADTT). Multiple statistical analyses identified positive correlations of dynamic cone penetration index (DPI) and rate of total rutting, and DPI and percent of good core. Negative correlation was discovered between DPI and fatigue cracking code one, and DPI and percent of poor core. AADTT was positively correlated with transverse cracking codes one and two while it had no correlation with transverse cracking code zero. Thickness of the unbound layer was negatively correlated with pavement roughness and percent of poor core, while it was positively correlated with the percent of good core. Finally, the recommendation for minimum acceptable value of California bearing ratio (CBR) was provided based on the correlation between DPI and rate of change of rutting code. The recommendation enables the selection of a CBR value based on the number of years required for unit increase in the rutting code.
Energy piles are gaining increased popularity due to a growing demand for clean energy. To further advance the understanding of soil-structure interaction in energy piles, recently-derived analytical solutions have been implemented to investigate the impact of stratigraphy on the soil-structure interaction. This was accomplished by comparing the measured and predicted head displacements, axial strains and stresses in an energy pile embedded in the actual homogeneous and layered soil profiles, as well as into synthetic homogeneous soil profiles. The analytical solutions for homogeneous soil profile captured the smooth experimentally observed response versus depth very well. In the case of a layered soil profile, the corresponding analytical model was capable of capturing nuances in trends of axial stress and strain versus depth at the interface of different layers. The analytical predictions for the layered profile appear to be slightly less accurate than for the homogenous profile. The experimental data obtained from the layered profile appear to be a bit more scattered than those from the homogeneous profile. In the former case, the interplay of the individual soil layers with the pile occurs while maintaining the continuity of the pile stress and displacement at the interface of different layers. The response throughout each layer of the layered profile is quantitatively different than the corresponding homogeneous response. Nevertheless, qualitatively the response throughout each layer of the layered profile is similar to the response of the pile embedded in the corresponding homogeneous layer.