Christian Löbbe

Mr. Christian Löbbe


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2019 in Metals
Verified
Journal Article
Open access
PDF file
RMRickmer Meya
Rickmer Meya
CKCarl F. Kusche
Carl F. Kusche
CLChristian Löbbe
Christian Löbbe
Talal Al-SammanTalal Al-Samman
Talal Al-Samman
SKSandra Korte-Kerzel
Sandra Korte-Kerzel
ATA. Erman Tekkaya
A. Erman Tekkaya
In a variety of modern, multi-phase steels, damage evolves during plastic deformation in the form of the nucleation, growth and coalescence of voids in the microstructure. These microscopic sites play a vital role in the evolution of the materials’ mechanical properties, and therefore the later performance of bent products, even without having yet led to macroscopic cracking. However, the characterization and quantification of these diminutive sites is complex and time-consuming, especially when areas large enough to be statistically relevant for a complete bent product are considered. Here, we propose two possible solutions to this problem: an advanced, SEM-based method for high-resolution, large-area imaging, and an integral approach for calculating the overall void volume fraction by means of density measurement. These are applied for two bending processes, conventional air bending and radial stress superposed bending (RSS bending), to investigate and compare the strain- and stress-state dependent void evolution. RSS bending reduces the stress triaxiality during forming, which is found to diminish the overall formation of damage sites and their growth by the complimentary characterization approaches of high-resolution SEM and global density measurements.

25 March 2016 in Materials
Verified
Journal Article
Open access
PDF file
CLChristian Löbbe
Christian Löbbe
OHOliver Hering
Oliver Hering
LHLars Hiegemann
Lars Hiegemann
ATA. Erman Tekkaya
A. Erman Tekkaya
Hot stamping of sheet metal is an established method for the manufacturing of light weight products with tailored properties. However, the generally-applied continuous roller furnace manifests two crucial disadvantages: the overall process time is long and a local setting of mechanical properties is only feasible through special cooling techniques. Hot forming with rapid heating directly before shaping is a new approach, which not only reduces the thermal intervention in the zones of critical formability and requested properties, but also allows the processing of an advantageous microstructure characterized by less grain growth, additional fractions (e.g., retained austenite), and undissolved carbides. Since the austenitization and homogenization process is strongly dependent on the microstructure constitution, the general applicability for the process relevant parameters is unknown. Thus, different austenitization parameters are analyzed for the conventional high strength steels 22MnB5, Docol 1400M, and DP1000 in respect of the mechanical properties. In order to characterize the resulting microstructure, the light optical and scanning electron microscopy, micro and macro hardness measurements, and the X-ray diffraction are conducted subsequent to tensile tests. The investigation proves not only the feasibility to adjust the strength and ductility flexibly, unique microstructures are also observed and the governing mechanisms are clarified.

7 November 2015 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Closed access
PDF file
CLChristian Löbbe
Christian Löbbe
CHChristoph Hoppe
Christoph Hoppe
CBChristoph Becker
Christoph Becker
ATA. Erman Tekkaya
A. Erman Tekkaya

4 December 2018 in Journal of Materials Processing Technology
Verified
Journal Article
Closed access
GGGoran Grzancic
Goran Grzancic
CLChristian Löbbe
Christian Löbbe
NKNoomane Ben Khalifa
Noomane Ben Khalifa
ATA. Erman Tekkaya
A. Erman Tekkaya

1 January 2019 in International Journal of Precision Engineering and Manufacturing
Verified
Journal Article
Closed access
PDF file
RMRickmer Meya
Rickmer Meya
CLChristian Löbbe
Christian Löbbe
ATA. Erman Tekkaya
A. Erman Tekkaya

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
ENEsmaeil Nazari
Esmaeil Nazari
CLChristian Löbbe
Christian Löbbe
SGStefan Gallus
Stefan Gallus
SIS. Ahmad Izadyar
S. Ahmad Izadyar
ATA. Erman Tekkaya
A. Erman Tekkaya
The incremental tube forming (ITF) is a process combination of the kinematic tube bending and spinning to shape high strength and tailored tubes with variable diameters and thicknesses. In contrast to conventional bending methods, the compressive stress superposition by the spinning process facilitates low bending stresses, so that geometrical errors are avoided and the shape accuracy is improved. The study reveals the interaction of plastic strains of the rolling and bending process through an explicit FEM investigation. For this purpose, the three-dimensional machine set-up is discretized and modeled in terms of the fully disclosed spinning process during the gradual deflection of the tube end for bending. The analysis shows that, depending on the forming tool shape, the stress superposition is accompanied by high plastic strains. Furthermore, this phenomenon is explained by the three dimensional normal and shear strains during the incremental spinning. Analyzing the strains history also shows a nonlinearity between the strains by bending and spinning. It is also shown that process parameters like rotational velocity of the spinning rolls have a huge influence on the deformation pattern. Finally, the method is used for the manufacturing of an example product, which reveals the high process flexibility. In one clamp a component with a graded wall thickness and outside diameter along the longitudinal axis is produced.