Satyajit Chincholkar

Dr. Satyajit Chincholkar


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 September 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
SCSatyajit Chincholkar
Satyajit Chincholkar
WJWentao Jiang
Wentao Jiang
CCChok-You Chan
Chok-You Chan
Sliding-mode (SM) control is a popular nonlinear control strategy for the dc–dc converters as it offers several advantages such as ease of implementation and robust performance against load and line variations. However, the main drawback of the traditional hysteresis-modulation (HM)-based SM controller is that its use in the regulation of the dc-dc converters results in a trade-off between the overshoot and speed of the closed-loop output voltage response. This is due to the use of the traditional proportional-integral (PI) controller which is used to generate the reference inductor current of the controller. To overcome this problem, the existing SM controller is modified such that the reference inductor current used in the sliding surface is now generated using an integral whose integrand is a function of the normalized output voltage error of the converter. A key feature of the integrand is that it is bounded by a user-defined constant. The expression of an equivalent control signal of the proposed SM controller is derived and the detailed stability analysis of the closed-loop controlled system is given. Finally, some experimental results comparing the performance of the proposed SM controller with that of an existing SM controller are provided.

5 July 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
WJWentao Jiang
Wentao Jiang
SCSatyajit Chincholkar
Satyajit Chincholkar
CCChok-You Chan
Chok-You Chan
The multilevel dc-dc boost converter (MBC) is well known for its simple circuit structure and high voltage gain. Several controllers have been previously employed for its output voltage regulation. However, due to the non-minimum phase nature of the MBC, these controllers use both the inductor current and output voltage as feedback variables. This increases the complexity of the controller design and cost of implementation. In order to overcome aforementioned drawbacks, a voltage-mode controller for the regulation of the MBC is proposed in this paper. By using the generalized reduced-order state-space model of the converter and frequency-domain techniques, the stability of the voltage-controlled converter system is analyzed. In addition, some simulation and experimental results illustrating the ability of the proposed controller to regulate a 3x dc-dc multilevel boost converter in the presence of load and line voltage variations are provided.

19 February 2021 in Electronics
Verified
Journal Article
Open access
PDF file
SCSatyajit Chincholkar
Satyajit Chincholkar
WJWentao Jiang
Wentao Jiang
CJChan Chok You John
Chan Chok You John
Shriram S. RangarajanShriram S. Rangarajan
Shriram S. Rangarajan
Boost-type dc-dc converters present non-minimum phase dynamic system characteristics. Therefore, controller design using only the output voltage for feedback purposes is not a very straightforward task. Even though output voltage control can be achieved using inductor current control, the implementation of such current-mode controllers may require prior knowledge of the load resistance and also demand more states such as one or more currents in feedback. In this paper, the development of a new output feedback controller for boost-type dc-dc converters is presented. The controller form is such that it avoids the possibility of saturation in the control signal due to division by zero. The basic structure of the proposed controller is firstly obtained from the expression of the open-loop control signal, and the complete controller structure is then derived to satisfy the closed-loop stability conditions. Simulation and experimental results clearly verify the ability of the control law to provide robust regulation against parameter variations.

1 April 2016 in IET Power Electronics
Verified
Journal Article
Open access
PDF file
SCSatyajit Chincholkar
Satyajit Chincholkar
CCChok‐You Chan
Chok‐You Chan
This study presents a comparative study of linear current‐mode controllers for the regulation of a two‐stage cascade boost converter having a single active switch. The current‐mode controllers used in this study are designed using the input and output inductor currents of the converter. The objective of this study is to find the most suitable inductor current for feedback purposes. The analyses of the current‐controlled systems are carried out using the state‐space and frequency‐response approaches. It is shown that the controller using the output inductor current is preferred over the controller using the input inductor current. Experimental and simulation results are also provided to validate the theoretical conclusions.

18 December 2017 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
SCSatyajit Chincholkar
Satyajit Chincholkar
WJWentao Jiang
Wentao Jiang
CCChok-You Chan
Chok-You Chan
Sliding-mode (SM) control is a popular nonlinear control strategy for the dc-dc converters as it offers several advantages such as ease of implementation and robust performance against load and line variations. However, the main drawback of the traditional hysteresis-modulation (HM)-based SM controller is that its use in the regulation of the dc-dc converters results in a trade-off between the overshoot and speed of the closed-loop output voltage response. This is due to the use of the traditional proportional-integral (PI) controller which is used to generate the reference inductor current of the controller. To overcome this problem, the traditional PI-based SM controller is modified such that the reference inductor current used in the sliding surface is now generated using an integral whose integrand is a function of the normalized output voltage error of the converter. A key feature of the integrand is that it is bounded by a user-defined constant. The modified SM control strategy is applied to a hybrid dc-dc boost converter. The expression of the equivalent control signal of the proposed SM controller is derived and the detailed stability analysis of the closed-loop controlled system is given. Also, experimental results are provided to show that the proposed SM controller gives an improved performance as compared to that obtained using the existing PI-based SM controller.

14 February 2019 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
SCSatyajit Chincholkar
Satyajit Chincholkar
WJWentao Jiang
Wentao Jiang
CJChan Chok You John
Chan Chok You John
A normalized output error-based sliding-mode (SM) controller for the dc-dc cascade boost converter is proposed. In this controller, the reference inductor current trajectory used in the sliding surface is computed using the bounded normalized voltage error. As compared to the traditional hysteresis-based SM controller, the proposed controller provides more room for tuning the controller gains and thus significantly improves the transient responses in the presence of load, line and reference voltage variations. The stability analysis of the proposed SM controlled system is provided. Also, a comparative study of the traditional and proposed SM controllers for the regulation of the cascade boost converter is presented. The experimental results show the superiority of the proposed controller in handling load, line and reference voltage variations.