Muhammad Usman Sheikh

Dr. Muhammad Usman Sheikh

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2021 in Sensors
Verified
Journal Article
Open access
PDF file
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
BXBoxuan Xie
Boxuan Xie
KRKalle Ruttik
Kalle Ruttik
HYHüseyin Yiğitler
Hüseyin Yiğitler
RJRiku Jantti
Riku Jantti
JHJyri Hämäläinen
Jyri Hämäläinen
With the popularization of Internet-of-things (IoT) and wireless communication systems, a diverse set of applications in smart cities are emerging to improve the city-life. These applications usually require a large coverage area and minimal operation and maintenance cost. To this end, the recently emerging backscatter communication (BC) is gaining interest in both industry and academia as a new communication paradigm that provides high energy efficient communications that may even work in a battery-less mode and, thus, it is well suited for smart city applications. However, the coverage of BC in urban area deployments is not available, and the feasibility of its utilization for smart city applications is not known. In this article, we present a comprehensive coverage study of a practical cellular carrier-based BC system for indoor and outdoor scenarios in a downtown area of a Helsinki city. In particular, we evaluate the coverage outage performance of different low-power and wide area technologies, i.e., long range (LoRa) backscatter, arrow band-Internet of Things (NB-IoT), and Bluetooth low energy (BLE) based BC at different frequencies of operation. To do so, we carry out a comprehensive campaign of simulations while using a sophisticated three-dimensional (3D) ray tracing (RT) tool, ITU outdoor model, and 3rd generation partnership project (3GPP) indoor hotspot model. This study also covers the energy harvesting aspects of backscatter device, and it highlights the importance of future backscatter devices with high energy harvesting efficiency. The simulation results and discussion provided in this article will be helpful in understanding the coverage aspects of practical backscatter communication system in a smart city environment.

2 June 2025 in IEEE Communications Standards Magazine
Verified
Journal Article
Open access
RJRiku Jantti
Riku Jantti
JLJingyi Liao
Jingyi Liao
TZTianshu Zhang
Tianshu Zhang
BXBoxuan Xie
Boxuan Xie
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
AHAyman Hassan
Ayman Hassan
The Internet of Things (IoT) has gained significant attention in recent years, and it is seen as one of the key enabling technologies driving digital disruption in the society. Cellular IoT technologies offer a method to connect various sensor and actuator devices to the Internet by utilizing existing mobile networks. The 3rd Generation Partnership Project (3GPP) has recently initiated a study on Ambient IoT (AIoT), aiming to develop a new Massive Machine Type Communications (mMTC) solution for mobile networks. This solution is intended to support devices requiring significantly lower power i.e., several orders of magnitude less power than existing 3GPP low-power wide-area connectivity solutions. Backscatter communication is considered as one of the key technology enablers for AIoT. In this paper, we explore how backscatter-based AIoT devices can be seamlessly integrated into existing 4G and 5G networks without requiring any modifications to the system specifications.

5 October 2020
Verified
Conference Paper
Closed access
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
RJRiku Jantti
Riku Jantti
JHJyri Hämäläinen
Jyri Hämäläinen
Channel models are routinely used to evaluate the performance of a mobile communication systems. An appropriate channel model accurately predicts the signal propagation in a given radio environment and thus, enables the credible system analysis. Yet, shortcomings in the channel model may lead to either too pessimistic or, on the other hand, overoptimistic system performance results. In this paper we evaluate the 3rd Generation Partnership Project (3GPP) street canyon model (ŦR 38.901, Release 14) in a Manhattan environment against the Shoot and Bouncing Ray (SBR) method based Ray Tracing (RŦ) model. Simulations are performed at three different frequencies i.e. 1.8 GHz, 3.5 GHz, and 28 GHz. Simulation results indicate that in Manhattan microcellular system setup, the 3GPP model provides more optimistic coverage and capacity results as compared with the deterministic approach of ray tracing. While ray tracing provides more realistic results, we propose a new path loss model based on ray tracing results. The performance of the proposed model is in a close agreement with ray tracing results and thus, it can be used for precise and accurate cell coverage prediction.

6 January 2021 in Wireless Communications and Mobile Computing
Verified
Journal Article
Open access
PDF file
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
BBBehnam Badihi
Behnam Badihi
KRKalle Ruttik
Kalle Ruttik
RJRiku Jantti
Riku Jantti
The main target of this article is to propose a simple Received Signal Strength Indicator‐ (RSSI‐) based adaptive Physical Layer (PHY) selection approach for Bluetooth Low Energy 5.0 (BLE 5) and compare the performance of adaptive PHY selection with the performance of individual PHY. This article also validates the simulation results acquired from the in‐house developed Ray Tracing (RT) tool with the BLE 5 measurements conducted in a corridor of the TUAS building, Aalto University. The performance metrics considered for the analysis are RSSI, throughput, and outage ratio. The impact of different transmission power on BLE 5 is also analyzed. The obtained simulation results indicate a Root Mean Square Error (RMSE) of about 4.6 dB between the measured and the simulated RSSI at 2.4 GHz frequency. By investigating these results, an adaptive PHY selection algorithm is proposed in this article. The adaptive PHY selection approach enhances the mean throughput of the system and improves the outage ratio as well. In the light of acquired results, the adaptive PHY selection scheme shows significant performance gain and is found more beneficial in the case of an environment with mixed RSSI samples, i.e., a mix of low and high RSSI values.

24 October 2025 in Telecommunication Systems
Verified
Journal Article
Open access
PDF file
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
KRKalle Ruttik
Kalle Ruttik
RJRiku Jantti
Riku Jantti
JHJyri Hämäläinen
Jyri Hämäläinen
The terahertz (THz) and sub-terahertz (Sub-THz) bands are prime candidates for the sixth-generation (6G) wireless communication system, especially for indoor scenarios. In these frequency ranges, key challenges include high propagation loss, substantial molecular absorption, weak diffraction, and the constraint of restricted transmit power despite broad bandwidths. The considerable bandwidth available at the sub-THz band makes it an appealing and enticing option. However, the challenges mentioned earlier pose difficulties in deploying sub-THz systems. Therefore, it is imperative to conduct thorough radio propagation studies to assess the feasibility and deployment possibilities of communication systems operating in the sub-THz frequency range. One of the targets of this work is to precisely identify channel variations at the sub-THz band, and then compare the performance of different antenna solutions at the receiving end in coping with those variations. In this regard, we carried out a comprehensive campaign of ray tracing simulations considering both line-of-sight (LOS) and non-LOS (NLOS) conditions in an indoor scenario. Our internally developed 3D ray tracing tool was calibrated and validated through measurements before being employed for this research work. Ray tracing techniques can deliver results with high accuracy and precision; however, they have substantial computational complexity, and that restricts the scalability of simulations. In this research work, a realistic scenario of the user walking through the tee-junction of the corridor is considered, while being served by the transmitter located in the other wing of the corridor. This article mainly evaluates the coverage aspects of the indoor network employing different antenna solutions at the receiver, i.e., a single fixed beam antenna, an ideal adaptive antenna with beam steering capability, and a switched beam antenna (SBA), at a sub-THz frequency of 100 GHz. We evaluate the impact of different beam pointing error for adaptive antennas and the number of overlapping beams for SBAs, on the received signal power level. The acquired results reveal that in the case of an ideal adaptive antenna, an almost 20 dB signal power is lost while migrating from 3.5 GHz to 26.5 GHz, followed by an additional 14.5 dB loss when transiting from 26.5 GHz to 100 GHz. The findings presented in this article establish a foundation for future investigations of wireless systems in the sub-THz frequency range.

1 January 2019 in Advances in Science, Technology and Engineering Systems Journal
Verified
Journal Article
Open access
MSMuhammad Usman Sheikh
Muhammad Usman Sheikh
RBRitayan Biswas
Ritayan Biswas
JLJukka Lempiainen
Jukka Lempiainen
RJRiku Jantti
Riku Jantti