Purpose: Surface acoustic wave (SAW) sensors have attracted great attention worldwide for a variety of applications in measuring physical, chemical and biological parameters. However, stability has been one of the key issues which have limited their effective commercial applications. To fully understand this challenge of operation stability, this paper aims to systematically review mechanisms, stability issues and future challenges of SAW sensors for various applications. Design/methodology/approach: This review paper starts with different types of SAWs, advantages and disadvantages of different types of SAW sensors and then the stability issues of SAW sensors. Subsequently, recent efforts made by researchers for improving working stability of SAW sensors are reviewed. Finally, it discusses the existing challenges and future prospects of SAW sensors in the rapidly growing Internet of Things-enabled application market. Findings: A large number of scientific articles related to SAW technologies were found, and a number of opportunities for future researchers were identified. Over the past 20 years, SAW-related research has gained a growing interest of researchers. SAW sensors have attracted more and more researchers worldwide over the years, but the research topics of SAW sensor stability only own an extremely poor percentage in the total researc topics of SAWs or SAW sensors. Originality/value: Although SAW sensors have been attracting researchers worldwide for decades, researchers mainly focused on the new materials and design strategies for SAW sensors to achieve good sensitivity and selectivity, and little work can be found on the stability issues of SAW sensors, which are so important for SAW sensor industries and one of the key factors to be mature products. Therefore, this paper systematically reviewed the SAW sensors from their fundamental mechanisms to stability issues and indicated their future challenges for various applications.
Currently pressure sensors utilized for water pressure measurement need batteries for direct power supply. However, batteries are lifespan-limited and not so reliable in the buried water pipe environment. The maintenance work due to battery failures is costly for utility owners. Wireless passive surface acoustic wave (WP-SAW) sensors do not need a direct power supply from batteries and can work in harsh environments. They are low-cost and compatible with microelectromechanical systems (MEMS) technologies. This study investigates a temperature-compensated WP-SAW bidirectional reflective delay line (RDL) pressure sensor and its feasibility in improving water pressure measurement. The linear temperature-compensated pressure sensing functional model between the output phase shifts and the pressure change is established theoretically and verified by experiments. An experimental framework for testing the sensor node is built. The water pressure sensing adaptor is proposed. Experimental results: the experimental data show good linearities, which fits the established functional relationship; the numerical functional relationship has been derived and expressed; the sensor node has a good performance in the range of pressure difference from 0 to 0.5 MPa, which meets the normal 28 m water pressure sensing requirements; the accuracy of this sensor is 7.22 kPa, which can be utilized for the water pressure sensing tasks in water distribution systems.
The conventional water pressure measurement method requiresbatteries as power sources for pressure sensors. This methodis unreliable because the risk of damaging batteries is high especially in harsh environment. This paper provides a novel method that wireless passive surface acoustic wave (SAW) pressure sensoris introduced for water pressure measurement. Wireless passive SAW sensors do not need direct power supply. Therefore, batteries are not requiredby using this new technology. The main types of wireless passive SAW sensors are reviewed. The performance of wireless passive SAW sensor is tested. The water pressure sensing framework is proposed
Wireless passive surface acoustic wave (SAW) sensor has been widely used in many applications. This paper presents a feasibility study on a designed wireless passive SAW delay line temperature and pressure sensor for monitoring water distribution systems. The substrate of the sensor node is a Y-Z orientation cut LiNbO 3 crystalline with 0.5 mm thickness. The Interdigital transducer (IDT) was fabricated centrally on the surface of the substrate with an antenna connected. There are three reflectors fabricated on the same surface of the IDT. One reflector is on one side and the other two are on the other side of the IDT. A simulated water pipe platform with testing devices was assembled to test the feasibility of the sensor node working in water pipe environment. The experimental result showed that the designed sensor worked properly but 4/5 amplitude of signals is lost compared to the experimental results in the open-air environment.