Total Shoulder Arthroplasty (TSA) is the process of replacing the damaged ball and socket joint in the shoulder with a prosthesis made with polyethylene and metal components. After this procedure, intervention may be required as a result of damage to the prosthesis, except for the need for an examination regarding the prosthesis at certain periods. If the patient does not have information about the model and manufacturer of the prosthesis, the treatment process is delayed. Artificial intelligence-assisted systems can speed up the treatment process by classifying the manufacturer and model of the prosthesis. In this study, artificial intelligence methods were applied to classify shoulder implants using X-ray images. The model and manufacturer of the prosthesis is detected by using the proposed deep learning method. Besides, the most commonly used machine learning classifiers were applied for the same problem to compare the results and show the effectiveness of the proposed method. In addition, the accuracy and precision analysis and measurements of the processing times for the applied methods were performed to reveal the performance, accuracy, and efficiency of the study. In order to measure the performance of the proposed method, it was compared with studies on the same problem in the literature. As a result of the comparison, it was found that the proposed method, with an accuracy rate of 97.2%, performed better than the other studies. In the study, the implant manufacturer and model are classified in order to carry out the implant surgery process in the best way with the proposed deep learning model. With the success of the proposed system, the applicability of this model in similar prosthesis classifications has been shown. Differently from the studies in the literature, the channel selection formula is presented in the proposed deep learning method recommended for selecting the most distinctive feature filters.
1 December 2016 in Computer Methods and Programs in Biomedicine
The early diagnosis of sepsis reduces the risk of the patient’s death. Gradient-based algorithms are applied to the neural network models used in the estimation of sepsis in the literature. However, these algorithms become stuck at the local minimum in solution space. In recent years, swarm intelligence and an evolutionary approach have shown proper results. In this study, a novel hybrid metaheuristic algorithm was proposed for optimization with regard to the weights of the deep neural network and applied for the early diagnosis of sepsis. The proposed algorithm aims to reach the global minimum with a local search strategy capable of exploring and exploiting particles in Particle Swarm Optimization (PSO) and using the mental search operator of the Human Mental Search algorithm (HMS). The benchmark functions utilized to compare the performance of HMS, PSO, and HMS-PSO revealed that the proposed approach is more reliable, durable, and adjustable than other applied algorithms. HMS-PSO is integrated with a deep neural network (HMS-PSO-DNN). The study focused on predicting sepsis with HMS-PSO-DNN, utilizing a dataset of 640 patients aged 18 to 60. The HMS-PSO-DNN model gave a better mean squared error (MSE) result than other algorithms in terms of accuracy, robustness, and performance. We obtained the MSE value of 0.22 with 30 independent runs.
Time series forecasting is the method of predicting future values of a model by reviewing its past data. Various models like traditional approaches, statistical methods, moving average, ARIMA, RNN’s, or XGBoost may also be applied. Activation functions are the primary most important hyper parameters or artificial neural networks that decide whether a neuron will be active or not. However, the most widely used sigmoid and ReLU activation functions include the problems of linearity, gradient protection, vanishing gradient and data convergence. Solution of these problems is significant for the development of activation functions which are one of the most important hyper parameters for artificial neural networks. A new activation function is suggested to generate a solution for the problems existing in the activation functions within the scope of this study. A hybrid model has been created from the RNN and LSTM algorithms and applied on different time series data in order to implement this suggested activation function called as the volatility activation function. The volatility activation function has been compared with the literature studies, the conditions for being a function have been proved and its applicability has been demonstrated by means of financial instrument and electrical transformer temperature data. As a result of the study, the characteristics of the volatility activation function have been presented; additionally its applicability, validity and proof has been performed. Furthermore, it has been proved that the problems found in the activation functions used in the literature are not existing in the volatility activation function. It has been verified that the volatility activation function is functional on time series. To demonstrate the feasibility of the volatility activation function, it has been applied to three different time series problems. As a result of the study conducted on the electrical transformer temperature estimation, MSE=0.362 and MAE= 0.448 were obtained; namely these results are similar to the literature studies. In the test results with ounce gold data, the accuracy rate increased by 0,1. In the test results with Australian rain forecast data, the accuracy rate increased by 0,2. As a result, a new activation function is suggested for the deep learning.
2 September 2021 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Yeni tip koronavirüs (Covid-19), hem insanlarda hem de hayvanlarda hastalığa sebep olan koronavirüs ailesinin bir üyesidir. Covid-19, Dünya Sağlık Örgütü tarafından pandemi olarak tanımlandırılan ve tüm dünyada salgınlaşarak insanlar için sonucu ölüme kadar gidebilecek riske sahiptir. Covid-19 tanısı konulabilmesi için şüpheli bireyden RT-PCR testi ile tanının doğrulanması gerekmektedir. Fakat bu testin sonuçlanması hem uzun zaman almakta hem de yanlış negatif sonuçlar ile çok sık karşılaşılabilmektedir. Covid-19 tanısı ne kadar erken ve doğru olursa, hayat kaybı risk oranı birey için o derece az olmaktadır. Derin öğrenme, özellikle tıp alanında son derece yüksek doğruluk ve hassasiyet gerektiren çeşitli karmaşık problemleri çözmek için çeşitli uygulamalarda yaygın olarak kullanılmıştır. Bu çalışmada, akciğer X-Ray görüntülerinden otomatik Covid-19 tanısı, önerilen çok kanallı CNN yöntemi kullanılarak yapılmaktadır. Hasta ve sağlıklı bireylerden elde edilen X-Ray görüntüleri çevrimiçi olarak üç ayrı veri tabanından elde edilmiştir. Sonuçları karşılaştırmak ve önerilen yöntemin verimliliğini ortaya koymak için tekrarlayan derin sinir ağları (SRN) mimarisi de aynı problem için uygulanmıştır. Ayrıca, çalışmanın performansını, doğruluğunu ve verimliliğini ortaya koymak için uygulanan yöntemler için doğruluk, hassasiyet analizi ve işlem sürelerinin ölçümleri yapılmıştır. Önerilen sistem ile PCR testi sonucu beklenmeden kısa sürede Covid-19 tanısı konarak, virüs vücutta etkisini ve hayati riski arttırmadan önlem alınması sağlanmaktadır. Bu çalışmada; tüm dünyada insan yaşamı için büyük bir risk olan Covid-19 ‘un erken tespiti için CNN'ye dayalı yeni bir yöntem önerilmektedir. Literatürdeki çalışmalardan farklı olarak, beş evrişim kanalına sahip olan çok kanallı CNN mimarisi sunumu ve bu kanalların ürettiği sonuçlar arasında en belirgin özellik filtrelerini seçmek için önerilen çok kanallı CNN mimarisinde kanal seçim formülü ortaya konmaktadır
25 September 2023 in Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Günümüzde makine öğrenmesi yöntemleri etkin bir biçimde kullanılarak pek çok alanda yüksek performanslar ve başarılı sonuçlar göstermiştir. Bu nedenle yöntemler, çeşitli sektörlerde son yıllarda daha da yaygınlaşmaya başlamıştır. Makine öğrenmesi modellerinden elde edilebilecek başarılarla birçok sorun öngörülüp çözüme ulaştırılabilir. Çalışmadaki amaç, ortaokul öğrencileri ile yapılan anketten toplanan veriler kullanılarak; eğitim başarı tahminini yapacak bir makine öğrenmesi modeli ortaya koymak ve öğrenciyi etkileyebilecek faktörlerinin önüne geçebilmektir. Anket soruları, öğrencinin başarısına tesir edebilecek etkenler araştırılarak oluşturulmuştur. Çalışma kapsamında, çeşitli ortaokullarda eğitim gören 519 farklı öğrenciden kişisel verilerin korunması kanunu kapsamında 13 sorudan oluşan anket aracılığıyla veri toplanmıştır. Bu veriler hiçbir kurumla paylaşılmamış olup, gizlilik korunmuştur. Veri seti incelenerek bazı manipülasyon, ön işleme, görselleştirme işlemlerinden geçirilmiş; K-En Yakın Komşu (K-NN) , Rastgele Ormanlar (RO) , Lineer Regresyon, Bagged Trees Regression (BTR - Torbalanmış Ağaçlar), Gradient Boosting Regressor (GBM - Gradyen Arttırıcı Regresyon) ve Karar Ağaçları (KA) algoritmaları kullanılmıştır. Çalışmada, veri manipülasyon işlemleri gerçekleştirildikten sonra model kurularak öğrencinin Türkçe notu üzerinden eğitim başarısının tahmini yapılmıştır. Çalışmada, ders seçiminin belirlenmesi, ana dilin Türkçe olması ve eğitim hayatından itibaren her dönem Türkçe dersi ile karşılaşılmasından dolayı Türkçe dersi bağımlı değişken olarak seçilmiştir. Çalışma neticesinde, rastgele orman yöntemi en başarılı yöntem olmuş; algoritmanın performansı 0.88 ve R-Kare değeri 0.98 olarak elde edilmiştir. Yeni girdilerle test edilen model Türkçe notu üretmiştir. Öğrencinin eğitim durumunu etkileyen en önemli faktörler Türkçe notuna bağlı olarak aralarındaki korelasyon ile aile geliri ve ders çalışma saati olarak belirlenmiştir. Etkenler seçilirken model çeşitli senaryolarla defalarca test edilmiştir ve korelasyon ilişkileri hesaplanmıştır.