Surfactant-promoted methane hydrate formation during the past 2–3 decades has been reviewed, aiming toward achieving a comprehensive evaluation on the current research status and effective guidance on the research prospects.
27 June 2017 in ACS Sustainable Chemistry & Engineering
Sodium dodecyl sulfate (SDS) has been reported as the most efficient kinetic promoter for hydrate-based natural gas storage and transportation; however, the foam generation during hydrate dissociation is a serious problem. In this work, we grafted the −SO3– group (similar as the hydrophilic group of SDS) on nanosheets of graphene oxide (GO) to prepare −SO3–-coated GO nanosheets (sulfonate graphene oxide, SGO), which were then used to promote methane hydrate formation. For comparison, graphene (GP) and GO were also prepared and used as kinetic promoters for methane hydrate formation. Among SGO, GP, and GO, SGO produced the best promotion, which at concentrations of 0.25, 0.5, 0.75 g/L resulted in methane hydrate formation finished within 208.7 ± 26.6, 242.3 ± 97.6, and 312 ± 135.5 min, respectively, with storage capacities reaching 139.7 ± 4.7, 143.3 ± 6.1, and 143.9 ± 7.2 v/v, respectively. Furthermore, −SO3–-coated nanosheets of SGO even produced better promotion to methane hydrate formation compared with SDS and avoided foam generation during hydrate dissociation, which has great potential in hydrate-based natural gas storage and transportation.
Gas hydrates have promising application prospects in the fields of future energy sources, natural gas storage and transportation, CO2 capture and sequestration, gas separation, and cold energy. However, the application of hydrate technologies is being restricted due to the slow formation rate of gas hydrates. Kinetic promoters have been receiving increased attention, given that they can improve the hydrate formation rate with very small doses and do not affect gas storage capacity. However, most kinetic promoters are non-renewable, petrochemical-derived, non-degradable materials, inevitably leading to resource waste and environmental pollution. Biopromoters, derived from biomass, are renewable, biodegradable, environmentally friendly, non-toxic (or low toxic), and economically feasible. This mini review summarizes the current status of already discovered biopromoters, including lignosulfonate, amino acid, biosurfactant, and biological porous structures, which have the potential to replace petrochemical-derived promoters in hydrate technologies. Finally, future research directions are given for the development of biopromoters.
12 December 2016 in Journal of Materials Chemistry A