Cutting forces and acoustic emissions signals while machining Fiber Reinforced Plastics (FRP) depends strongly on the tool wear. Fractal analysis can be adapted to those signals to characterize their variations. This tool wear monitoring technique is presented herein for the carbon FRP (CFRP) orbital drilling. Fractal parameters, characterizing the signal complexity and ruggedness, are very efficient for machining quality estimation and to follow the tool wear evolution
In the aerospace industry, deburring operations are often difficult to achieve and can be very costly. Hence, burrs generated during the machining should be studied. In this research, the drilling operations were performed and analysed for a stack composed of carbon fibre reinforced polymer (CFRP), titanium and aluminium alloys, using three cutting feeds and three cutting speeds for each material. A monitoring method is presented to predict the burr heights in the titanium and aluminium layers. The cutting force signals obtained during the drilling of the CFRP layer were analysed using the regularization fractal analysis, resulting in an estimation of the fractal dimension. This fractal analysis was optimized in order to monitor the clearance tool wear and the burr heights. The burr heights, measured at the outlet of the titanium and aluminium alloys, were observed in terms of the thrust force, the torque, the hole diameter and circularity, and the clearance tool wear. This fractal analysis technique can be implemented for an on-line control to predict the generated burr heights in the metallic layers while drilling the previous CFRP layer.
In the metal cutting process, the tool condition directly affects the quality of the machined component. To control the quality of the cutting tool and avoid equipment downtime, it is essential to monitor its condition during the machining process. The primary purpose is to send a warning before tool wear reaches a certain level, which could influence product quality. In this paper, tool condition is monitored using fractal analysis of the spindle electric current signal. The current study analyzes the monitoring of the cutting tool when milling AISI 5140 steel with a four-flute solid carbide end mill cutter to develop monitoring techniques for wear classification of metal cutting processes. The spindle electric current signal is acquired using the machine tool internal sensor, which meets industrial constraints in their operating conditions. As a new approach, the fractal theory is referred to analyze the spindle electric current signal and then assess the tool wear condition during the metal cutting process. Fractal parameters were defined to extract significant characteristic features of the signal. This research provides a proof of concept for the use of fractal analysis as a decision-making strategy in monitoring tool condition.
30 March 2018 in The International Journal of Advanced Manufacturing Technology