The utilization of industrial by-products as stabilizers is gaining attention from the sustainability perspective. Along these lines, granite sand (GS) and calcium lignosulfonate (CLS) are used as alternatives to traditional stabilizers for cohesive soil (clay). The unsoaked California Bearing Ratio (CBR) was taken as a performance indicator (as a subgrade material for low-volume roads). A series of tests were performed by varying the dosages of GS (30%, 40%, and 50%) and CLS (0.5%, 1%, 1.5%, and 2%) for different curing periods (0, 7, and 28 days). This study revealed that the optimal dosages of granite sand (GS) are 35%, 34%, 33%, and 32% for dosages of calcium lignosulfonate (CLS) of 0.5%, 1.0%, 1.5%, and 2.0%, respectively. These values are needed to maintain a reliability index greater than or equal to 3.0 when the coefficient of variation (COV) of the minimum specified value of the CBR is 20% for a 28-day curing period. The proposed RBDO (reliability-based design optimization) presents an optimal design methodology for designing low-volume roads when GS and CLS are blended for clay soils. The optimal mix, i.e., 70% clay blended with 30% GS and 0.5% CLS (exhibiting the highest CBR value) is considered an appropriate dosage for the pavement subgrade material. Carbon footprint analysis (CFA) was performed on a typical pavement section according to Indian Road Congress recommendations. It is observed that the use of GS and CLS as stabilizers of clay reduces the carbon energy by 97.52% and 98.53% over the traditional stabilizers lime and cement at 6% and 4% dosages, respectively.
The increase in infrastructure requirement drives people to use all types of soils, including poor soils. These poor soils, which are weak at construction, must be improved using different techniques. The extinction of natural resources and the increase in cost of available materials require us to think of alternate resources. The usage of industry by-products and related methods for improving the properties of different soils has been studied for several years. Granite dust is an industrial by-product originating from the primary crushing of aggregates. The production of huge quantities of granite dust in the industry causes severe problems from the handling to the disposal stage. Accordingly, in the civil engineering field, the massive utilization of granite dust has been proposed for various applications to resolve these issues. In this context, the present review provides precise and valuable content on granite dust characterization, its effect as a stabilizer on the behavior of different soils, and its interaction mechanisms. The efficacy of the granite dust in replacing sand in concrete is explored followed by its ability to improve the geotechnical characteristics of clays of varying plasticity are explored. The review is even extended to study the effect of binary stabilization on clays with granite dust in the presence of calcium-based binders. The practical limitations encountered and its efficiency over other stabilizers are also assessed. This review is further extended to analyze the effect of the granite dust dosage for various field applications.
This paper assesses the significance of stabilizing clay soil with calcium lignosulphonate (CLS) and granite sand (GS). Unconfined compressive strength () and hydraulic conductivity (K) are taken as performance indicators and the effect of varying dosages of GS (30%, 40%, and 50%) and CLS (0.5%, 1%, 1.5%, and 2%) at different curing periods on and K are examined. The best fit regression equations have been proposed to relate and K of untreated clay soil and stabilized clay using GS and CLS. The proposed nonlinear regression equations provide details of experimental data and aid in estimating and K very efficiently and reliably for targeted geotechnical applications from a sustainable perspective.