Strap-down inertial navigation system/celestial navigation system (SINS/CNS) integrated navigation is a high precision navigation technique for ballistic missiles. The traditional navigation method has a divergence in the position error. A deeply integrated mode for SINS/CNS navigation system is proposed to improve the navigation accuracy of ballistic missile. The deeply integrated navigation principle is described and the observability of the navigation system is analyzed. The nonlinearity, as well as the large outliers and the Gaussian mixture noises, often exists during the actual navigation process, leading to the divergence phenomenon of the navigation filter. The new nonlinear Kalman filter on the basis of the maximum correntropy theory and unscented transformation, named the maximum correntropy unscented Kalman filter, is deduced, and the computational complexity is analyzed. The unscented transformation is used for restricting the nonlinearity of the system equation, and the maximum correntropy theory is used to deal with the non-Gaussian noises. Finally, numerical simulation illustrates the superiority of the proposed filter compared with the traditional unscented Kalman filter. The comparison results show that the large outliers and the influence of non-Gaussian noises for SINS/CNS deeply integrated navigation is significantly reduced through the proposed filter.

Among the methods of the multi-source navigation filter, as a distributed method, the federated filter has a small calculation amount with Gaussian state noise, and it is easy to achieve global optimization. However, when the state noise is time-varying or its initial estimation is not accurate, there will be a big difference with the true value in the result of the federated filter. For the systems with time-varying noise, adaptive filter is widely used for its remarkable advantages. Therefore, this paper proposes a federated Sage–Husa adaptive filter for multi-source navigation systems with time-varying or mis-estimated state noise. Because both the federated and the adaptive principles are different in updating the covariance of the state noise, it is required to weight the two updating methods to obtain a combined method with stability and adaptability. In addition, according to the characteristics of the system, the weighting coefficient is formed by the exponential function. This federated adaptive filter is applied to the SINS/CNS/GNSS integrated navigation, and the simulation results show that this method is effective.

Fault identification for closed-loop control systems is a future trend in the field of fault diagnosis. Due to the inherent feedback adjustment mechanism, a closed-loop control system is generally very robust to external disturbances and internal noises. Closed-loop control systems often encourage faults to propagate inside the systems, which may lead to the consequence that faults amplitude becomes smaller and fault characteristics difference becomes more inapparent. Hence, it has been challenging to achieve fault identification for such systems. Traditional fault identification methods are not particularly designed for closed-loop control systems and thus cannot be applied directly. In this work, a new fault identification method is proposed, which is based on the deep neural network for closed-loop control systems. Firstly, the fault propagation mechanism in closed-loop control systems is theoretically derived, and the influence of fault propagation on system variables is analyzed. Then deep neural network is applied to find fault characteristics difference between different data modes, and a sliding window is used to amplify the fault-to-noise ratio and characteristics difference, with an aim to increase the identification performance. To verify this method, the simulations that are based on a numerical simulation model, the Tennessee industrial system and the satellite attitude control system are conducted. The results show that the proposed method is more feasible and more effective in fault identification for closed-loop control systems compared with traditional data-driven identification methods, including distance-based and angle-based identification methods.

For the underwater long baseline (LBL) positioning systems, the traditional distance intersection algorithm simplifies the sound speed to a constant, and calculates the underwater target position parameters with a nonlinear iteration. However, due to the complex underwater environment, the sound speed changes with time and space, and then the acoustic propagation path is actually a curve, which inevitably causes some errors to the traditional distance intersection positioning algorithm. To reduce the position error caused by the uncertain underwater sound speed, a new time of arrival (TOA) intersection underwater positioning algorithm of LBL system is proposed. Firstly, combined with the vertical layered model of the underwater sound speed, an implicit positioning model of TOA intersection is constructed through the constant gradient acoustic ray tracing. And then an optimization function based on the overall TOA residual square sum is advanced to solve the position parameters for the underwater target. Moreover, the parti-cle swarm optimization (PSO) algorithm is replaced with the traditional nonlinear least square method to optimize the implicit positioning model of TOA intersection. Compared with the traditional distance intersection positioning model, the TOA intersection positioning model is more suitable for the engineering practice and the optimization algorithm is more effective. Simulation results show that the proposed methods in this paper can effectively improve the positioning accuracy for the underwater target.