High power lasers are used in industry as machining tools for many operations including drilling, cutting, welding, and etching. Because of its advantages over conventional machining such as tight tolerances, ability to machine hard materials without wearing of the machine tool, and ease of automation, an experimental and analytical study was undertaken to investigate the feasibility of the laser to cut a nearly pure fibrous ceramic used as insulation material on the Space Shuttle. An analytical model was developed for drilling using a spatially varying laser beam. The model was used to determine the energy delivery to the surface from the laser beam and the conduction within the solid ceramic. A similarity variable was introduced to solve the transient heat conduction equation inside the solid tile and predict the temperature and temperature gradient. The temperature distribution within the tile was found and then used with an assumed boundary condition to predict the drilled cavity shape. This model has been used to develop algorithms for input into a computer automated laser machining facility. The model has been compared to experimental data taken using the ceramic material. The cavity shape and depth were experimentally measured in a thick sample using a CO2 laser and 10:5 collimation. Holes were drilled for various laser powers and exposure times. The hole depth and radius were measured after cross‐sectioning the samples. Model predictions were within 15% of experimental results.
26 April 2021 in International Journal of Nonlinear Sciences and Numerical Simulation
The effects of nozzle structures and working pressure on the dynamic characteristics of supersonic turbulent free jets have been investigated numerically. Four types of nozzles (namely Laval, pipe, contraction I, and contraction II, respectively) and four pressure conditions (namely K = 0.8, 1, 1.5, and 2, respectively) were considered. A Standard k-ε model was utilized for the calculation of the supersonic turbulent free jets. Validation of the model was performed on the Laval jet by comparing it with the experiment and large-eddy simulation (LES). A perfect agreement was achieved in terms of the centerline and radial axial velocity profiles. The jets issuing from the Laval and the pipe had a longer potential core and a larger centerline axial velocity with the same outlet momentum. The length of the potential core was proportional to the working pressure, but variations of the centerline axial velocity decay rate were inverse for all nozzles. The effects of nozzle structures and work pressure on the spreading rates of the jets were insignificant. No obvious change trend could be observed on the kinematic and geometric virtual origins. The study can provide references for the nozzle and working pressure selection in practical application.