We present an improved analytical model describing transmittance of a metal-dielectric-metal (MDM) waveguide coupled to an arbitrary number of stubs. The model is built on the well-known analogy between MDM waveguides and microwave transmission lines. This analogy allows one to establish equivalent networks for different MDM-waveguide geometries and to calculate their optical transmission spectra using standard analytical tools of transmission-line theory. A substantial advantage of our model compared to earlier works is that it precisely incorporates the dissipation of surface plasmon polaritons resulting from ohmic losses inside any metal at optical frequencies. We derive analytical expressions for transmittance of MDM waveguides coupled to single and double stubs as well as to N identical stubs with a periodic arrangement. We show that certain phase-matching conditions must be satisfied to provide optimal filtering characteristics for such waveguides. To check the accuracy of our model, its results are compared with numerical data obtained from the full-blown finite-difference time-domain simulations. Close agreement between the two suggests that our analytical model is suitable for rapid design optimization of MDM-waveguide-based compact photonic devices.

Two-dimensional (2-D) compact photonic crystal reflectors on suspended InP membranes were studied under normal incidence. We report the first experimental demonstration of 2-D broadband reflectors (experimental stopband superior to 200 nm, theoretical stopband of 350 nm). They are based on the coupling of free space waves with two slow Bloch modes of the crystal. Moreover, they present a very strong sensitivity of the polarization dependence, when modifying their geometry. A compact (50/spl times/50 /spl mu/m/sup 2/) demonstrator was realized and characterized, behaving either as a broadband reflector or as a broadband transmitter, depending on the polarization of the incident wave. Experimental results are in good agreement with numerical simulations.

A new approach is proposed to realize an optical link for intrachip optical interconnects. This link includes III-V compound-based laser sources and photodetectors, and silicon-on-insulator-based strip waveguides. The heterogeneous integration of an InP-based microdisk laser with a silicon waveguide using SiO/sub 2/-SiO/sub 2/ molecular bonding and nanofabrication procedures is emphasized. The technological procedure is described and first experimental results show that, with an adequate configuration, 35% of light could be coupled from the optically pumped microlaser to the waveguide, as a result of the vertical evanescent coupling.

A polarization splitter based on gold filled dual-core photonic crystal fiber (DC-PCF) that can work from 1420 nm to 1980 nm (560 nm bandwidth) is proposed in this work. The splitter has an extinction ratio lower than −20 dB over a large bandwidth with a total length of 254.6 μm. The key principle of operation of the splitter is the induced change in the refractive index of the y-odd mode when it is coupled to the second order plasmonic mode, while other supermodes are weakly affected by the plasmonic mode. The proposed broadband and compact polarization splitter may find applications in communications and sensing, being capable of working in the infrared and mid-infrared wavelength ranges.