Purpose: Although mechanical behavior of rigid frame pier has been clearly recognized, their time-varying seismic performance are yet to be well characterized due to some offshore piers that are eroded by chloride ion and located in earthquake-prone area. In this study, the time-variant seismic fragility analysis was conducted to evaluate seismic performance of rigid frame pier under four damage states with considering the time-varying characteristics of the material.Design/methodology/approach: This paper establishes the nonlinear finite element model for the investigated offshore reinforcement concrete (RC) pier with considering the time-varying durability damage of the materials and defines the damage state, damage position and damaged index of the offshore RC pier. It also analyzes the time-varying seismic fragility of the offshore RC pier by using the capacity demand ratio method in the whole life cycle.Findings: The results show that chloride induced corrosion has a significant effect on the rigid frame pier and bending capacity of top section is less than that of bottom section. The rate of decline accelerates after the service life reaching 30 years under the coupling of the earthquake and the environmental erosion. In the early years of service, the seismic fragility of the structure changed slowly.Originality/value: This paper analyzes the influencing factors of seismic performance of rigid structure pier, and analyzes the seismic capacity and seismic performance of rigid structure pier under different service periods.

Temperature is one of the important factors that affect the fatigue failure of the welds in orthotropic steel desks (OSD) between U-ribs and bridge decks. In this study, a new analysis method for temperature-induced stress in U-ribs is proposed based on multi-scale finite element (FE) models and monitoring data First, the long-term temperature data of a long-span cable-stayed bridge is processed. This research reveals that a vertical temperature gradient is observed rather than a transverse temperature gradient on the long-span steel box girder bridge with tuyere components. There is a linear relationship between temperature and temperature-induced displacement, taking into account the time delay effect (approximately one hour). Then, a multi-scale FE model is established using the substructure method to condense each segment of the steel girder into a super-element, and the overall bridge temperature-induced displacement and temperature-induced stress of the local U-rib on the OSD are analyzed. The agreement between the calculated temperature-induced stresses and measured values demonstrates the effectiveness of the multi-scale modeling strategy. This approach provides a valuable reference for the evaluation and management of bridge safety. Finally, based on the multi-scale FE model, the temperature-induced strain distribution of components on the OSD is studied. This research reveals that the deflection of the girder continually changes with the temperature variation, and the temperature-induced strain of the girder exhibits a variation range of approximately 100 με.