Clove and green Coffee (g-Coffee) extracts were used to synthesize green iron oxide nanoparticles, which were then used to sorb Cd2+ and Ni2+ ions out of an aqueous solution. Investigations with x-ray diffraction, Fourier-transform infrared spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, nitrogen adsorption and desorption (BET), Zeta potential, and scanning electron microscopy were performed to know and understand more about the chemical structure and surface morphology of the produced iron oxide nanoparticles. The characterization revealed that the main component of iron nanoparticles was magnetite when the Clove extract was used as a reducing agent for Fe3+, but both magnetite and hematite were included when the g-Coffee extract was used. Sorption capacity for metal ions was studied as a function of sorbent dosage, metal ion concentration, and sorption period. The maximum Cd2+ adsorption capacity was 78 and 74 mg/g, while that of Ni2+ was 64.8 and 80 mg/g for iron nanoparticles prepared using Clove and g-Coffee, respectively. Different isotherm and kinetic adsorption models were used to fit experimental adsorption data. Adsorption of Cd2+ and Ni2+ on the iron oxide surface was found to be heterogeneous, and the mechanism of chemisorption is involved in the stage of determining the rate. The correlation coefficient R2 and error functions like RMSE, MES and MAE were used to evaluate the best fit models to the experimental adsorption data. The adsorption mechanism was explored using FTIR analysis. Antimicrobial study showed broad spectrum antibacterial activity of the tested nanomaterials against both Gram positive (S. aureus) (25923) and Gram negative (E. coli) (25913) bacteria with increased activity against Gram positive bacteria than Gram negative one and more activity for Green iron oxide nanoparticles prepared from Clove than g-Coffee one.
Membrane methods are environmentally friendly and can significantly improve the design and development of new energy consumption processes that are very important nowadays. However, their effective use requires advanced membrane materials. This study aims to improve the performance of pervaporation polyvinyl alcohol (PVA)-based membrane for isopropanol dehydration. To achieve this goal, two methods were applied: (1) bulk modification of PVA by Pluronic F127 and (2) development of supported PVA-based membrane using polyphenylene isophthalamide (PA) as a substrate with a various porosity. Developed membranes were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy (SEM), contact angle measurement, and swelling experiments. The concentration influence of PA casting solution (12–20 wt.%) on the performance of porous PA membranes (substrates) was investigated in ultrafiltration of pure water and bovine serum albumin (BSA) solution as well as by microscopic methods (SEM and atomic force microscopy). The developed dense and supported PVA-based membranes were tested in the pervaporation dehydration of isopropanol. Optimal transport characteristics were obtained for a supported membrane with a PVA-based selective layer containing 3 wt.% Pluronic F127 onto an ultrafiltration PA (17 wt.%) substrate: improved permeation flux 0.100–1.164 kg/(m2 h) and 98.8–84.6 wt.% water content in the permeate in pervaporation dehydration of isopropanol (12–80 wt.% water).
1 February 2016 in Desalination and Water Treatment
Poly(acrylonitrile-co-divinylbenzene) nanoparticles, approximately 41 nm mean size, were prepared by precipitation polymerization technique in water:ethanol phase. Influence of the various polymerization parameters (e.g. temperature and time of polymerization, concentration of monomers and initiator, monomers composition, and cosolvent ratio) on the properties (e.g. size and conversion yield) of the particles have been investigated. Poly(acrylonitrile-co-divinylbenzene) nanoparticles were functionalized with amidoxime groups through chemical modification using hydroxyl amine to acquire ions exchanger characters. As a result, the particle size of the copolymer was increased from 41 up to 46 nm. The verification of the hydroximation process was obtained from thermogravimetric and infrared spectrometer analyses. The influence of various parameters, such as the concentration of hydroxyle amine, the temperature and the time of amidooximation, and the monomers composition, on the ion exchange capacity has been investigated and correlated finally to the efficiency of methylene blue removal process.
Nanoparticles of zinc oxide (ZnO NPs), propolis, and the ZnO–propolis composite (ZnO-P NCs) have been synthesized using a biomimetic approach. Zeta potential analysis and Fourier-transform infrared spectroscopy (FT-IR) proved the formation and stability of nanomaterials. Findings using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), EDX-imaging, and transmission electron microscopy (TEM) demonstrated that the particle size of ZnO-P NCs was 9.70 nm. The antioxidant (DPPH radical scavenging) activity of synthesized nanomaterials was investigated. IC50 values of zinc oxide, propolis, and ZnO-P NCs nanoparticles were 2.75, 1.7, and 1.45 mg mL−1, respectively. In addition, their selectivity and anticancer activity for cancer cell lines (Hela and MCF-7) and human normal (W138) cell lines were investigated. ZnO-P NCs were highly effective against the cell line for breast cancer with an IC50 value of 18 µg/mL, indicating its anticancer-promising potent cytotoxicity in breast cancer treatment, and 23 µg/mL against cervical cancer. In addition, the higher observed safety, antioxidant, and anticancer activities for synthesized ZnO-P NCs confirmed the synergistic effect of this combination. It was obtained that the specific mechanisms underlying the synergy effect between zinc oxide nanoparticles and nanopropolis in their composite formulation varied depending on the preparation method, ratio, and concentration of the components.
This study investigates the green synthesis, characterization, and biological activities of iron oxide nanoparticles (IONPs) synthesized from clove and green coffee extracts. FTIR spectroscopy identified reactive functional sites, including –OH, C=O, and polyphenolics, confirming their role as reducing and stabilizing agents XRD analysis showed amorphous IONPs at ambient temperature and crystalline phases after annealing at 550 °C. SEM imaging revealed pyramidal morphologies for green coffee-derived IONPs and rod-like structures for clove-derived IONPs. Also, nitrogen adsorption and desorption (BET) and X-ray photoelectron spectroscopy were used to gain a thorough grasp of the surface characteristics of the nanoparticles. The Dubinin–Radushkevich isotherm best described caffeine adsorption, confirming physisorption, while the Langmuir model indicated monolayer adsorption with maximum capacities of 596.91 mg/g (clove) and 714.55 mg/g (green coffee). Kinetic studies suggested pseudo-second-order adsorption for green coffee-derived IONPs (R2 = 0.96156) and the Elovich model for clove-derived IONPs (R2 = 0.98595). Antimicrobial tests showed strong antibacterial activity of clove-derived IONPs against S. aureus and B. cereus, with significant antifungal efficacy against P. reqfortii. Green coffee-derive IONPs exhibited higher DPPH radical scavenging activity (87.03%) than clove-derived IONPs (27.18%). Cytotoxicity assessment on WI-38 human lung fibroblasts revealed concentration-dependent effects, with green coffee-derived IONPs showing higher biocompatibility (CC₅₀ = 564.04 μg/mL) than clove-derived IONPs (CC₅₀ = 398.41 μg/mL). Economic analysis confirmed laboratory-scale production costs of $6.92–7.25/g, with projected 70% reduction at industrial scale through waste valorization and process intensification. These observations demonstrate the applicability of eco-compatible IONPs as antimicrobial and antioxidant agents, offering a sustainable alternative to conventional treatments. Further optimization and clinical validation are recommended.
2 December 2025 in Journal of Coastal Conservation