Magnetic induction tomography (MIT) is largely focused on applications in biomedical and industrial process engineering. MIT has a great potential for imaging metallic samples; however, there are fewer developments directed toward the testing and monitoring of metal components. Eddy-current non-destructive testing is well established, showing that corrosion, fatigue and mechanical loading are detectable in metals. Applying the same principles to MIT would provide a useful imaging tool for determining the condition of metal components. A compact MIT instrument is described, including the design aspects and system performance characterisation, assessing dynamic range and signal quality. The image rendering ability is assessed using both external and internal object inclusions. A multi-frequency MIT system has similar capabilities as transient based pulsed eddy current instruments. The forward model for frequency swap multi-frequency is solved, using a computationally efficient numerical modelling with the edge-based finite elements method. The image reconstruction for spectral imaging is done by adaptation of a spectrally correlative base algorithm, providing whole spectrum data for the conductivity or permeability.
19 April 2023 in IEEE Transactions on Instrumentation and Measurement
Physical sensing by touch is essential for building intelligent artificial systems in robotic manipulation and human-robotic interaction. Inductive skins are being investigated as part of a major effort to develop the most robust and reliable touch sensors, primarily based on traditional inductive proximity sensing. Magnetic induction tomography (MIT) is an imaging system considered for medical diagnostics and industrial process monitoring. This article presents a novel electromagnetic-based skin (EM-skin) using the MIT imaging system. This is done by processing the mutual inductance data from a planar array sensing a skin-like medium, including an elastomeric medium that interfaces the MIT sensors with plates of metallic or magnetic touch elements. The paper demonstrates EM-based multi-touch, dynamical touch, and quantitative touch pressure sensing. MIT data is captured at 10 frames/s, so allowing for dynamical touch analysis. The EM-skin sensing area of 900 mm 2 demonstrates a large area of sensing skin. The results show the successful reconstruction of dynamical sensing, where two applied cyclic touch points, with different frequencies are discriminately detected. Quantitively force sensing shows the detection of a minimum of 120 mN force, which translates to 0.38 kP of applied pressure in the described system. Further force calibration is carried out demonstrating the quantitative nature of the proposed EM skin. These results will open the way to a new generation of distributed and reliable soft skins that are versatile due to material design and processing.
Real-time sensing of shape is an important tool for many intelligent machines, particularly in soft robotics. Mutual induction data from an array of sensors shows great promise as an accurate tool for shape sensing. In this paper, we show how inductive array data can be used for shape imaging and topographic shape tracking. The idea has been extended to many geometrical settings showing a versatile tool for shape sensing. The sensors are arranged around a circular array allowing reconstruction of the deformation from circular shape to generic polygon shape including elliptic shape. A linear array shows the sensing of tension force and various deformation of lines. Finally, the sensor array is used on a surface allowing reconstruction of both shear force and the normal force to the surface. A suitable method of calculation of the mutual inductance between two coils has been implemented and a range of methods including inversion algorithms, calibration methods, and a machine learning tool show the application of the new shape sensor system.
Wireless power transfer (WPT) systems for electric vehicles require reliable foreign object detection (FOD) mechanisms both during and prior to power transfer to ensure operational safety and efficiency. The primary purpose of this study was to develop a foreign object detection system to ensure that no objects are present in the area of magnetic coupling (between primary and secondary coils) prior to initiating power transfer. Conventional FOD techniques based on impedance, visual light, or thermal monitoring provide limited spatial information and are sensitive to coil misalignment. This paper proposes a machine learning-based FOD approach using a planar Magnetic Inductance Tomography (MIT) sensor array that enables spatial electromagnetic sensing for early detection and localisation of conductive foreign objects. A dataset comprising 17,800 measurement frames was collected using a custom STM32-based data acquisition system in the absence of (prior to) power transfer. Likewise, a dataset comprising 300 sets of measurement frames was collected during power transfer, in which each frame contains 120 electromagnetic sensor readings. This capture methodology coincides with the detection requirements of live WPT systems. Four classification models, including Random Forest, Support Vector Machine, XGBoost, and Multi-Layer Perceptron, were evaluated. To enhance robustness against sensor drift and environmental variations, feature-engineering techniques incorporating statistical, temporal, frequency-domain, and derivative-based features were developed. Experimental results demonstrate high detection accuracy under both controlled and real-world conditions. The proposed approach demonstrates the feasibility of integrating machine learning-based MIT sensing into wireless EV charging infrastructure for reliable foreign object detection.
Low frequency electromagnetic waves emitted by sprite‐producing lightning are normally measured using vertical electric fields or horizontal magnetic fields. Here we report for the first time the simultaneous measurement of electromagnetic waves from sprite‐producing lightning in all six electromagnetic field components . A rigorous assessment of the horizontal electric field measurements with dipole antennas in two independent calibration experiments shows that a timing uncertainty of ns can be achieved, well above the current fundamental limit of the timing accuracy 1–5 ps. The coupling between the electric and magnetic fields is quantified using a transfer matrix, allowing the magnetic field to be reconstructed accurately from electric field measurements. The cross product of electric and magnetic fields is used to calculate peak energy fluxes and arrival azimuths from sprite‐producing lightning. It is found that peak energy fluxes vary between 10–1,000 and that the differences between the measured and expected arrival azimuths are practically normally distributed with a mean and standard deviation of . It is concluded that horizontal electric field measurements are well suited to characterize electromagnetic waves with added benefits, including the ease of deployment in harsh environments, cost‐effectiveness and scalability, for example for polarisation measurements in large low frequency arrays. The significance of this study is that it can be used as a pathfinder mission to identify critical technical requirements for the array deployment during the Africa2Moon lander mission.