Photonic integrated circuits (PICs) are today acknowledged as an effective solution to fulfill the demanding requirements of many practical applications in both classical and quantum optics. Phase shifters integrated in the photonic circuit offer the possibility to dynamically reconfigure its properties in order to fine tune its operation or to produce adaptive circuits, thus greatly extending the quality and the applicability of these devices. In this paper, we provide a thorough discussion of the main problems that one can encounter when using thermal shifters to reconfigure photonic circuits. We then show how all these issues can be solved by a careful design of the thermal shifters and by choosing the most appropriate way to drive them. Such performance improvement is demonstrated by manufacturing thermal phase shifters in femtosecond laser written PICs (FLW-PICs), and by characterizing their operation in detail. The unprecedented results in terms of power dissipation, miniaturization and stability, enable the scalable implementation of reconfigurable FLW-PICs that can be easily calibrated and exploited in the applications.
Programmability in femtosecond-laser-written integrated circuits is commonly achieved with the implementation of thermal phase shifters. Recent work has shown how such phase shifters display significantly reduced power dissipation and thermal crosstalk with the implementation of thermal isolation structures. However, the aforementioned phase shifter technology is based on a single gold film, which poses severe limitations on integration density and circuit complexity due to intrinsic geometrical constraints. To increase the compactness, we propose two improvements to this technology. Firstly, we fabricated thermal phase shifters with a photolithography process based on two different metal films, namely (1) chromium for microheaters and (2) copper for contact pads and interconnections. Secondly, we developed a novel curved isolation trench design that, along with a state-of-the-art curvature radius, allows for a significant reduction in the optical length of integrated circuits. As a result, curved Cr-Cu phase shifters provide a compact footprint with low parasitic series resistance and no significant increase in power dissipation (∼38 mW) and thermal crosstalk (∼20%). These results pave the way toward the fabrication of femtosecond-laser-written photonic circuits with a steep increase in terms of layout complexity.
Thermo-optic phase shifters allow one to dynamically tune and control the operation of integrated-optics interferometers. They have been demonstrated nowadays in different waveguide platforms, and their reliable functioning has enabled the realization of reconfigurable circuits of notable complexity. The design approach to such devices is often based on finite-element numerical simulations, which provide accurate descriptions of the underlying thermal phenomena, at the price of long computational times. Here, on the contrary, we devise an analytical model for the heat diffusion in a simplified geometrical configuration. The model describes both static and dynamic regimes, and can be conveniently applied both to three-dimensional waveguide devices inscribed by femtosecond laser pulses and to planar lithographic circuits. The accuracy of the predictions of the model is validated with experimental measurements on Mach-Zehnder interferometers with different geometries, realized in both kinds of platforms.
To date, most integrated quantum photonics experiments rely on single-photon detectors operating at cryogenic temperatures coupled to photonic integrated circuits (PICs) through single-mode optical fibers. This approach presents significant challenges due to the detection complexity, as cryogenic conditions hinder the development of scalable systems. In addition, going towards fully-integrated devices or, at least, removing the optical fibers would be also advantageous to develop compact and cost-efficient solutions featuring a high number of optical modes. This work reports on the direct coupling of a PIC, fabricated by femtosecond laser writing (FLW), and a silicon single-photon avalanche diode (SPAD) array, fabricated in a custom planar technology and compatible with the operation at room temperature. The effectiveness of this solution is shown by achieving perfect coupling and a system detection efficiency as high as 41.0% at a wavelength of 561 nm, which is the highest value reported to date among both heterogeneous/hybrid integrated and directly coupled systems. We also show the robustness of the coupling to misalignments, demonstrating that costly alignment procedures are not needed. Finally, we exploit the SPAD array to characterize a reconfigurable Mach-Zehnder interferometer, i.e., the basic building block of multimode reconfigurable PICs. This solution provides a new avenue to the design and implementation of quantum photonics experiments, especially effective when compact and cost-efficient systems are needed.
This paper highlights micro-transfer printing (MTP) as a promising scalable approach to heterogeneous integration for silicon photonics. MTP uniquely achieves high integration density, high throughput, and high material efficiency through a low-temperature, back-end integration process. Current demonstrations, including integrated III-V lasers and thin-film electro-optic modulators, confirm MTP's potential. Industrial adoption requires resolving challenges related to final integration yield and throughput, device reliability, and supply chain maturity.
The original boson sampling paradigm—consisting of multiple single-photon input states, a large interferometer, and multi-channel click detection—was originally proposed as a photonic route to quantum computational advantage. Its non-Gaussian resources, essential for outperforming any classical system, are provided by single-photon inputs and click detection. Yet the drive toward larger experiments has led to the replacement of experimentally demanding single-photon sources with Gaussian states, thereby diminishing the available non-Gaussianity—a critical quantum resource. As the community broadens its focus from the initial sampling task to possible real-world applications, it becomes crucial to quantify the performance cost associated with reducing non-Gaussian resources and to benchmark sampling platforms that employ different input states. To address this need, we introduce the Paderborn Quantum Sampler (PaQS), a hybrid platform capable of performing sampling experiments with eight Gaussian or non-Gaussian input states in a 12-mode interferometer within a single experimental run. This architecture enables direct, side-by-side benchmarking of distinct sampling regimes under otherwise identical conditions—only the input states vary between configurations. By employing a semi-device-independent framework based on matrix of moments approaches that offers certification that does not rely on prior knowledge of the interferometer or the input states, we verify that the observed data cannot be reproduced using classical resource states—a prerequisite for demonstrating quantum advantage. Applying this framework, we show that non-Gaussian inputs offer a distinct advantage in the verification of nonclassicality under our proposed metric.