In this paper, the enhanced nonlinear magnetic model of the low voltage interior permanent magnet synchronous machine (IPMSM) is developed using the frozen permeability (FP) technique in finite element analysis (FEA) FEMM 4.2 software. The magnetic model is derived by obtaining flux saturation maps for a wide range of dq stator currents. Furthermore, the FEA FP technique accounts for the corresponding offset in the flux maps due to the excitation of the permanent magnets, and well as for fitting the coefficients for the curve-fitting procedure. In order to demonstrate the usefulness of the proposed magnetic model, a nonlinear control strategy based on the maximum torque per ampere (MTPA) optimal algorithm for IPMSM is employed. The magnetic model and the MTPA control strategy are validated through a variety of computer simulations based on FEMM 4.2 and MATLAB R2023a software, as well as on a real IPMSM electric vehicle (EV) traction drive experimental setup.

In this paper, the enhanced auto-tuning technique based on the injection of two sinusoidal test signals of different frequencies applicable on the low voltage induction motor self-commissioning process is presented. The main feature of the proposed technique resides in the advanced signal processing of measured IM voltage and current signals based on the cascaded delay signal cancelation structure. This processing algorithm enables the filtering of the symmetry-related fundamental harmonic from the non-symmetrical test signal excitation typical for the self-commissioning process. Based upon the steady-state response from the proposed filtering block, the simple yet effective calculation method derives the complete parameter set of the IM equivalent circuit. The technique is validated through the variety of computer simulations and experimental tests on the digitally controlled low voltage IM traction drive.