Ghazal Fahmy

Ghazal Fahmy


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 March 2021 in Electronics
Verified
Journal Article
Open access
PDF file
GFGhazal Fahmy
Ghazal Fahmy
M. ZorkanyM. Zorkany
M. Zorkany
A memristor element has been highlighted in recent years and has been applied to several applications. In this work, a memristor-based digital to analog converter (DAC) was proposed due to the fact that a memristor has low area, low power, and a low threshold voltage. The proposed memristor DAC depends on the basic DAC cell, consisting of two memristors connected in opposite directions. This basic DAC cell was used to build and simulate both a 4 bit and an 8 bit DAC. Moreover, a sneak path issue was illustrated and its solution was provided. The proposed design reduced the area by 40%. The 8 bit memristor DAC has been designed and used in a successive approximation register analog to digital converter (SAR-ADC) instead of in a capacitor DAC (which would require a large area and consume more switching power). The SAR-ADC with a memristor-based DAC achieves a signal to noise and distortion ratio (SNDR) of 49.3 dB and a spurious free dynamic range (SFDR) of 61 dB with a power supply of 1.2 V and a consumption of 21 µW. The figure of merit (FoM) of the proposed SAR-ADC is 87.9 fj/Conv.-step. The proposed designs were simulated with optimized parameters using a voltage threshold adaptive memristor (VTEAM) model.

9 February 2017
Verified
Conference Paper
Closed access
MMMohamed Mourad
Mohamed Mourad
GFGhazal Fahmy
Ghazal Fahmy
AHAziza I. Hussein
Aziza I. Hussein
MAM. A. Abdelghany
M. A. Abdelghany
Spectrum sensing is the core process in cognitive radio networks. Spectrum sensing of wideband signal results in enhancement of system reliability and effectiveness. In this paper, a modified system of wideband spectrum sensing based on non-uniform Multi-coset samplers is proposed. The proposed system is designed to work on totally blind input wideband signal. Lomb-Scargle periodogram is used to detect the number of active bands (N). System parameters are selected to decrease the average sub-Nyquist sampling frequency that results in activating lower number of parallel branches of non-uniform samplers. Then, a lower power consumption and complexity is achieved. The proposed system is able to adapt its operating parameters, time offsets and number of active branches continuously. Simulation results show accurate reconstructed signal, high probability of detection and low errors even at a small number of sub-Nyquist samples and low SNR.

21 January 2022 in Electronics
Verified
Journal Article
Open access
PDF file
MAMayar Ali
Mayar Ali
HHHesham F. A. Hamed
Hesham F. A. Hamed
GFGhazal Fahmy
Ghazal Fahmy
A two-stage cascaded power amplifier (PA) employing a proposed Resistor-Capacitor (RC) interstage was provided and simulated. The current-reuse topology is employed at the first stage to lower the power consumption, while the RC interstage helps to enrich the gain flatness and the wideband matching. The shunt peaking topology in a common source configuration is adopted at the second stage to enhance the power gain. The postlayout simulation is performed using the TSMC 65 nm CMOS process operating in a frequency band of 3.1 GHz to 10.6 GHz. The postlayout simulation results indicate that a high flat gain of approximately 22.8 ± 1.2 dB, small group delay variation of ±50 ps, and good input and output matching of less than −10 dB are achieved over the desired working band. Moreover, a saturated output power of 10 dBm and maximum power-added efficiency (PAE) of 29.5% is achieved at 6 GHz. The proposed PA consumes the low power of 15.5 mW from 1.2 V supply voltage.

1 May 2015
Verified
Conference Paper
Closed access
SESarah A. El-Sayed
Sarah A. El-Sayed
GFGhazal Fahmy
Ghazal Fahmy
AHAziza I. Hussein
Aziza I. Hussein
FGFarouk A.-E. Al Geldawy
Farouk A.-E. Al Geldawy
The conventional current-steering Opamp is the building block of sigma-delta modulator circuits. It is also the major power consuming part of the circuit. The charge-steering concept can be applied to Opamps to obtain minimum power consumption. The two-stage charge-steering Opamp has been designed using 0.18um TSMC CMOS technology that consumes 0.23 mW power at a 48 MHz sampling frequency. A 2nd order, 1-bit, SC sigma-delta modulator is used to prove the applicability of the charge steering concept in sigma-delta modulators. The system achieves a SNR of 46 dB and a DR of 60 dB over a 1 MHz BW. The total power consumption of the circuit is 1.3 mW at 1.2v power supply.

1 December 2010
Verified
Conference Paper
Closed access
GFGhazal Fahmy
Ghazal Fahmy
RPRamesh Pokharel
Ramesh Pokharel
HKH. Kanaya
H. Kanaya
KYK. Yoshida
K. Yoshida
Typical and proposed recycling folded cascade (RFC) amplifier have been designed in TSMC 0.18 μm. Simulated and measured results are compared. Proposed RFC demonstrate an enhancement on DC gain by 5 dB almost for the same power consumption and bandwidth. Moreover, it realized less input referred noise than typical. Split-length devices (SLD) method is applied on proposed (RFC) to create a low impedance node employed in indirect feedback compensation. Realization of two-stages recycling folded cascade amplifier using indirect feedback compensation method has been designed. The proposed two-stages amplifier delivers open loop gain 83 dB enhanced by 20 dB over typical one, gain bandwidth product is 187 MHz and slew rate is 74 V/μs which is required for reconfigurable multi-mode sigma-delta ADC to attain high SNR and SNDR.

16 February 2017
Verified
Conference Paper
Closed access
MMMohamed Mourad
Mohamed Mourad
GFGhazal Fahmy
Ghazal Fahmy
AHAziza I. Hussein
Aziza I. Hussein
MAM. A. Abdelghany
M. A. Abdelghany
Spectrum sensing is a key technology in establishing and developing cognitive radio networks. High efficiency, reliability and real time are the most important required parameters for accurate sensing process. Wideband sensing is the main factor to achieve reliability of sensing process. Shadowing, fading and aliasing problems of signals affect the performance of spectrum sensing process therefore; cooperative sensing is effectively used to overcome such problems. In this paper, a novel system is proposed to sense the free channels in a wideband spectrum over distributed cooperative sensing platform of Multi-Coset (MC) periodic non-uniform sampling technique with lower branches then lower complexity than conventional MC sampler. The proposed system is designed to receive a blind input wideband signal. In this work, a system consists of four cooperated nodes by sharing their sensing output data to achieve sensing process. The cooperation between cognitive radio users is executed via reporting channels that connect different nodes. The final decision is based on the majority rules of cooperative sensing. Simulation results illustrated that the probability of detection results from cooperative sensing is higher than the individual sensing by each user itself.