In laser systems, beam pointing usually drifts as a consequence of various disturbances, e.g., inherent drift, airflow, transmission medium variation, mechanical vibration, and elastic deformation. In this paper, we develop a laser beam pointing control system with Fast Steering Mirrors (FSMs) and Position Sensitive Devices (PSDs), which is capable of stabilizing both the position and angle of a laser beam. Specifically, using the ABCD matrix, we analyze the kinematic model governing the relationship between the rotation angles of two FSMs and the four degree-of-freedom (DOF) beam vector. Then, we design a Jacobian matrix feedback controller, which can be conveniently calibrated. Since disturbances vary significantly in terms of inconsistent physical characteristics and temporal patterns, great challenges are imposed to control strategies. In order to improve beam pointing control performance under a variety of disturbances, we propose a data-driven disturbance classification method by using a Recurrent Neural Network (RNN). The trained RNN model can classify the disturbance type in real time, and the corresponding type can be subsequently used to select suitable control parameters. This approach can realize the universality of the beam stabilization pointing system under various disturbances. Experiments on beam pointing control under several typical external disturbances are carried out to verify the effectiveness of the proposed control system.
Si3N4 ceramics with a microscale rice leaf structure (MRLS) and titanium alloy were connected via brazing, and the influence of the surface microstructure on the ceramic connection was analyzed. MRLS fabrication is an efficient and high-degree-of-freedom method that can be used to change a material’s surface morphology and wettability. The MRLS was obtained at a laser power of 110 W, with line spacings of 100 and 50 μm. The laser-treated surface included nanoparticles and micro particles, exhibiting a coral-like structure after agglomeration. When the MRLS was used to braze the titanium alloy, no defects were observed at the brazing interface, and the formation was excellent. Throughout the brazed joint, the MRLS remained intact and formed a strong metallurgical bond with the brazing filler metal. A finite element analysis was performed to study the cross-sectional morphology after joint fracture; from the load-time curve, it was found that the MRLS on the surface not only helped improve the mechanical occlusion and brazing area at the interface, but also helped generate compressive stress on the Si3N4 side. Crack propagation was hindered, thereby increasing the joint strength.