Falih Alnahwi

Prof. Dr. Falih Alnahwi

Assoc Prof, Dr
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 April 2022 in Sensors
Verified
Journal Article
Open access
PDF file
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Chan Hwang SeeChan Hwang See
Chan Hwang See
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
In this paper, single-element and MIMO microstrip antenna with two pairs of unequal slits is proposed as a circularly polarized antenna with negligible back radiation for 5G mid-band handsets. The unequal pairs of slits are engraved on the antenna patch to guarantee the presence of the circular polarization (CP). The proximity-coupled feeding technique is used to excite the proposed microstrip antenna in order to provide larger antenna −10 dB bandwidth which approaches 10.8% (3.48–3.87 GHz). A novel analysis technique is proposed in this paper that demonstrates the 3D axial ratio pattern in order to generate CP in the broadside direction without affecting the structure of the ground plane which ensures weak back radiation. The 3 dB axial ratio bandwidth (ARBW) is found to be equal to 4.1% extended along the range (3.58–3.73 GHz). To make the design more compatible with the 5G mid-band handsets, the 2 × 2 MIMO structure of the proposed antenna with reduced mutual coupling (less than −20 dB) is also presented in this work. The simulation and measured results are in good agreement, and both verify the CP characteristics and the weak back radiation of the proposed antenna.

7 September 2022 in Electronics
Verified
Journal Article
Open access
PDF file
DHdoaa hakim
doaa hakim
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
AAAbdulkareem Abdullah
Abdulkareem Abdullah
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
This article presents a miniaturized triple-band antenna for Internet of Things (IoT) applications. The miniaturization is achieved by using a split square ring resonator and half ring resonator. The antenna is fabricated on an FR4 substrate with dimensions of (33 × 22 × 1.6) mm3. The proposed antenna resonates at the frequencies 2.4 GHz, 3.7 GHz, and 5.8 GHz for WLAN and WiMax applications. The obtained −10 dB bandwidth for the three bands of the proposed antenna are 300 MHz, 360 MHz, and 900 MHz, respectively. The measured reflection coefficient values of the proposed antenna corresponding to each resonant frequency are equal to −14.772 dB, −20.971 dB, and −28.1755 dB, respectively. The measured gain values are 1.43 dBi, 0.89 dBi, and 1 dBi, respectively, at each resonant frequency. There is a good agreement between the measured and simulated results, and both show an omnidirectional radiation pattern at each of the antenna resonant frequencies that is suitable for IoT portable devices.

11 February 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
Abdulghafor A. AbdulhameedAbdulghafor A. Abdulhameed
Abdulghafor A. Abdulhameed
AAAbdulkareem Abdullah
Abdulkareem Abdullah
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
This paper presents the design and implementation of a printed circuit microwave band-pass filter for 5G mid-band applications, using a Stub Loaded Multiple Mode Resonator (SL-MMR) technique. The objective of this article is to introduce a low-cost microstrip filter with improved passband and stopband characteristics, based on a mathematical analysis of stub loaded resonators. The filter cost is reduced by selecting the low-cost FR4 dielectric material as a substrate for the proposed filter. Based on the transmission line model of the filter, mathematical expressions are derived to predict the odd-mode and the even-mode resonant frequencies of the SL-MMR. The mathematical model also highlights the capability of controlling the position of the SL-MMR resonant frequencies, so that the 5G sub-band that extends along the range (3.7–4.2 GHz) can perfectly be covered with almost a flat passband. At the resonance frequency, a fractional bandwidth of 12.8% (500 MHz impedance bandwidth) has been obtained with a return loss of more than 18 dB and an insertion loss of less than 2.5 dB over the targeted bandwidth. Furthermore, a pair of parasitic elements is attached to the proposed filter to create an additional transmission zero in the lower stopband of the filter to enhance the suppression of the filter stopband. The measured and simulation results are well agreed, and both reveal the acceptable performance of the stopband and passband characteristics of the filter.

19 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AMAtyaf Hamid Mohammed
Atyaf Hamid Mohammed
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
This paper presents a circularly polarized (CP) microstrip antenna with dual circular polarization that is fed using a 3 dB 90° hybrid coupler to ensure dual-CP radiation. The proximity-coupled structure is used as a feeding technique to obtain a larger operational bandwidth that covers the standard LTE 43 of the 5G mid-band applications (3.6–3.8 GHz). The antenna was fabricated on an FR4 dielectric substrate with overall dimensions of 66.1 × 35 × 1.6 mm3. A circular patch was formed as a radiating element, with four identical slits that were etched on the patch to guarantee the presence of CP radiation at the required mid-band of the 5G frequency range. The measured impedance bandwidth (BW) of this antenna was 10.6% (3.46–3.85 GHz), while the 3 dB axial ratio bandwidth (ARBW) was 8.2% along the range (3.50–3.80 GHz). The measured average gain was about 1.3 dBi along the antenna impedance bandwidth.

2 January 2019 in Australian Journal of Electrical and Electronics Engineering
Verified
Journal Article
Closed access
Abdulghafor A. AbdulhameedAbdulghafor A. Abdulhameed
Abdulghafor A. Abdulhameed
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
HSHusham Lateef Swadi
Husham Lateef Swadi
AAAbdulkareem Abdullah
Abdulkareem Abdullah
A low profile and compact size cognitive radio (CR) sensing/communicating antenna system is presented in this paper. A slotted elliptical monopole antenna is proposed as an ultra-wideband sensing antenna for the CR system, while the CR communication relies on a triangular reconfigurable monopole antenna. Two PIN diodes are attached to the reconfigurable antenna to provide four different wideband CR communications with variable bandwidths. The simulation and measured results are in good agreement, and they demonstrate that both antennas have an omnidirectional radiation pattern with acceptable gain values compatible with the portable CR devices. In addition, the results show low mutual coupling between the sensing antenna and the communicating antenna that reaches to values less than −16 dB for all operational modes of the PIN diodes.

4 August 2022 in IEEE Access
Verified
Journal Article
Open access
Falih AlnahwiFalih Alnahwi
Falih Alnahwi
Yasir Al-YasirYasir Al-Yasir
Yasir Al-Yasir
SJSteve Jones
Steve Jones
IGIbrahim Gharbia
Ibrahim Gharbia
Chan Hwang SeeChan Hwang See
Chan Hwang See
Raed Abd-AlhameedRaed Abd-Alhameed
Raed Abd-Alhameed
The antenna presented in this study is a compact wideband monopole with wideband circular polarization that can be used across the whole antenna bandwidth. A rectangular C-shaped patch is partially covered by a ground plane in the proposed planar monopole antenna. Inserting a rectangular stub to the ground plane, etching a slit at the antenna patch, and adding a semicircular stub at the top of the antenna feed line increase the antenna impedance bandwidth (BW) and axial ratio bandwidth (ARBW). An FR4 substrate with overall dimensions of 25 mm $\times25$ mm $\times1.6$ mm is used to create the antenna. The antenna’s observed impedance BW is 70% (4.55 GHz in the 4.3-8.85 GHz band), while the measured broadside ARBW is improved to a value of 82.2 percent (5.3 GHz along the range 3.8-9.1 GHz). The impedance BW is perfectly covered by the ARBW; hence the antenna can be considered circularly polarized throughout its operational spectrum. Within the antenna BW, the measured gain is greater than 1.5 dB.