A novel tuned heave plate energy-harvesting system (THPEH) is presented for the motion suppressing and energy harvesting of a semi-submersible platform. This THPEH system is designed based on the principle of a tuned mass damper (TMD) and is composed of spring supports, a power take-off system (PTO) and four movable heave plates. The permanent magnet linear generators (PMLG) are used as the PTO system in this design. A semi-submersible platform operating in the South China Sea is selected as the research subject for investigating the effects of the THPEH system on motion reduction and harvesting energy through numerical simulations. The numerical model of the platform and the THPEH system, which was established based on hydrodynamic analysis, is modified and validated by the results of the flume test of a 1:70 scale model. The effects of the parameters, including the size, the frequency ratio and the damping ratio of the THPEH system, are systematically investigated. The results show that this THPEH system, with proper parameters, could significantly reduce the motions of the semi-submersible platform and generate considerable power under different wave conditions.
11 August 2018 in Journal of Marine Science and Technology
Heave plates are widely used for improving the sea keeping performance of ocean structures. In this paper, a novel tuned heave plate energy harvesting system (THPEH) is presented for the motion suppression and energy harvesting of a semi-submersible platform. The heave plates are connected to the platform though a power take-off system (PTO) and spring supports. The performance of the THPEH was investigated through forced oscillation tests of a 1:20 scale model. Firstly, the hydrodynamic parameters of the heave plate were experimentally studied under different excitation motion conditions, and a force model of the power take-off system was also established through a calibration test. Then, the motion performance, control performance, and energy harvesting performance of the THPEH subsystem were systematically studied. The effects of the tuned period and PTO damping on the performance of the THPEH were analyzed. Finally, a comparison between the conventional fixed heave plate system and THPEH was carried out. The results show that a properly designed THPEH could consume up to 2.5 times the energy from the platform motion compared to the fixed heave plate system, and up to 80% of the consumed energy could be captured by the PTO system. This indicates that the THPEH could significantly reduce the motion of the platform and simultaneously provide considerable renewable energy to the platform.
Logistical supply is costly for the deepwater oil and gas exploitation, thereby it is necessary to develop a novel power supply solution to improve the offshore structure’s self-holding capacity. The two-body point absorbers, as a renewable energy device, have achieved a rapid development. Heave plate is used to constrain the truss’s motion in the two-body point absorber, and the floater moves along the truss up and down. This two-body point absorber can be considered to be an essentially mass-spring-damper system. And it is well known that the heave plates have been widely used in the Spar platform to suppress the heave motions. So if the two-body point absorber can be modified to combine with offshore floating structures, this system can not only offer electric power to support operations or daily lives for the platform, but also control the large motions in the vertical plane. Following this concept, a novel tuned heave plate (THP) system is proposed for the conventional semi-submersible platform. In order to investigate the dynamic performances of the single THP, two experiments are conducted in this paper. First, the hydrodynamic coefficients of the heave plates are studied, and then the THP experiments are carried out to analyze its dynamic performance. It can be concluded that this THP is feasible and achieves the design objective.