Floating Photovoltaic (FPV) plants are already well developed, and deployed all over the world, on calm water inland lakes, or in sheltered locations. They are now progressing to be installed in nearshore sites, and in deep water seas. The company HelioRec, developing floating modules to form FPV arrays to be deployed in nearshore areas, was awarded free-of-charge testing of their system by the Marine Energy Alliance (MEA) European program. This paper describes the experimental testing of the 1:1 scale float system, composed of 16 floating modules supporting solar panels and three footpaths, carried out in Centrale Nantes’ ocean wave tank, allowing regular and irregular frontal and oblique wave conditions. Experimental results show that, even in the narrow wave spectrum experimentally achievable, a specific response from the array was revealed: the multibody articulated system exhibits a first-order pitch resonant mode when wavelengths are about twice the floater length. A shadowing effect, leading to smaller motions of rear floaters, is also observed, for small wavelengths only.
After a few weeks, underwater components of offshore structures are colonized by marine species and after few years this marine growth can be significant. It has been shown that it affects the hydrodynamic loading of cylinder components such as legs and braces for jackets, risers and mooring lines for floating units. Over a decade, the development of Floating Offshore Wind Turbines highlighted specific effects due to the smaller size of their components. The effect of the roughness of hard marine growth on cylinders with smaller diameter increased and the shape should be representative of a real pattern. This paper first describes the two realistic shapes of a mature colonization by mussels and then presents the tests of these roughnesses in a hydrodynamic tank where three conditions are analyzed: current, wave and current with wave. Results are compared to the literature with a similar roughness and other shapes. The results highlight the fact that, for these realistic roughnesses, the behavior of the rough cylinders is mainly governed by the flow and not by their motions.
Bio-colonisation affects the ageing of materials and the behaviour of offshore structures. Mooring systems and umbilicals belong to the family of slender bodies which are components sensitive to bio-colonisation because of a change of dynamic behaviour due to shape, roughness and mass modifications. However, this stochastic process in time and space is hard to predict. The purpose is then twofold: first, to provide a stochastic spatial model of the bio-colonisation on a mooring line; second, to show that in some defined environmental conditions, such as low wave height, low wind and current velocities, the monitoring of mooring lines tension can help to assess and reduce uncertainty on this model. Therefore, a comprehensive stochastic modelling based on mussels colonisation was carried out using on-site videotapes, experimental campaigns and expert knowledge. We studied the efficiency of a virtual sensing network using this model and a conditional entropy metric. It is first shown that the spatial model fits well with experimental data, and second that a denser medium accuracy sensor network is to be preferred to a single high accuracy fairlead sensor to reduce the uncertainty on the model parameters. It is then worth updating bio-colonisation on mooring lines during the life-time of a floating wind turbine.
Hard marine growth is an important process that affects the design and maintenance of floating offshore wind turbines. A key parameter of hard biofouling is roughness since it considerably changes the level of drag forces. Assessment of roughness from on-site inspection is required to improve updating of hydrodynamic forces. Image processing is rapidly developing as a cost effective and easy to implement tool for observing the evolution of biofouling and related hydrodynamic effects over time. Despite such popularity; there is a paucity in literature to address robust features and methods of image processing. There also remains a significant difference between synthetic images of hard biofouling and their idealized laboratory approximations in scaled wave basin testing against those observed in real sites. Consequently; there is a need for such a feature and imaging protocol to be linked to both applications to cater to the lifetime demands of performance of these structures against the hydrodynamic effects of marine growth. This paper proposes the fractal dimension as a robust feature and demonstrates it in the context of a stereoscopic imaging protocol; in terms of lighting and distance to the subject. This is tested for synthetic images; laboratory tests; and real site conditions. Performance robustness is characterized through receiver operating characteristics; while the comparison provides a basis with which a common measure and protocol can be used consistently for a wide range of conditions. The work can be used for design stage as well as for lifetime monitoring and decisions for marine structures, especially in the context of offshore wind turbines.